GRAFF G2101LM20MOB

Graff Single Hole Lavatory Faucet G-2101-LM20M-OB User Manual

Model: G-2101-LM20M-OB | Brand: GRAFF

परिचय

This manual provides detailed instructions for the installation, operation, and maintenance of your Graff Single Hole Lavatory Faucet, model G-2101-LM20M-OB. Please read this manual thoroughly before beginning installation to ensure proper function and longevity of your product. Keep this manual for future reference.

सुरक्षितता माहिती

नेहमी खालील सुरक्षा खबरदारी पाळा:

पॅकेज सामग्री

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:

साधने आवश्यक

स्थापनेसाठी सामान्यतः खालील साधने आवश्यक असतात:

सेटअप आणि स्थापना

Follow these steps for proper installation of your new faucet:

1. Prepare the Sink/Countertop

Ensure the mounting surface is clean and free of debris. If replacing an old faucet, remove it and clean the area thoroughly. The faucet requires a single hole for installation.

Graff Single Hole Lavatory Faucet in Olive Bronze finish

Image: The Graff Single Hole Lavatory Faucet, model G-2101-LM20M-OB, featuring a sleek design with a single handle and curved spout, shown in an Olive Bronze finish. This image illustrates the overall appearance of the product.

2. नल स्थापित करा

  1. Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet where it will meet the sink/countertop.
  2. Insert the faucet body through the single mounting hole in the sink/countertop.
  3. From underneath the sink, slide the rubber gasket, then the metal washer, onto the threaded shank of the faucet.
  4. Thread the mounting nut onto the shank and hand-tighten. Use a basin wrench or adjustable wrench to securely tighten the nut, ensuring the faucet is straight and stable. Do not overtighten.

3. Connect Water Supply Lines

  1. Connect the hot and cold water supply lines from the faucet to the corresponding hot and cold water supply valves. The hot water line is typically on the left, and the cold water line on the right.
  2. Use an adjustable wrench to tighten the connections. Do not overtighten.
  3. If your model includes a drain assembly, follow the manufacturer's instructions for its installation.

४.३. गळतीची चाचणी

  1. गरम आणि थंड पाण्याच्या पुरवठ्याचे झडपे हळूहळू चालू करा.
  2. Check all connections for leaks. If leaks are present, gently tighten the connections until the leak stops.
  3. Run water through the faucet for a few minutes to flush out any debris from the lines.

ऑपरेटिंग सूचना

Your Graff Single Hole Lavatory Faucet is designed for ease of use:

देखभाल

Regular cleaning and maintenance will help preserve the finish and functionality of your faucet:

समस्यानिवारण

सामान्य समस्या आणि त्यांचे निराकरण यासाठी खालील तक्ता पहा:

समस्यासंभाव्य कारणउपाय
कमी पाण्याचा प्रवाहबंद एरेटर; अंशतः बंद पुरवठा झडपा; पुरवठा लाइनमध्ये कचरा.Clean or replace aerator; fully open supply valves; flush supply lines.
नळाच्या तळातून गळतीसैल माउंटिंग नट; सीलंटचा अयोग्य वापर.Tighten mounting nut; reapply plumber's putty/silicone if necessary.
हँडलमधून गळतीजीर्ण काडतूस.Contact Graff customer support for a replacement cartridge.
पाण्याच्या तापमानाच्या समस्याIncorrect supply line connection; water heater issues.Verify hot/cold connections; check water heater settings.

तपशील

वैशिष्ट्यतपशील
ब्रँडग्राफ
मॉडेल क्रमांकG-2101-LM20M-OB
समाप्त प्रकारOlive Bronze
भोकांची संख्या1
हँडल स्थानSingle-hole deck-mount
UPC843274020882
ASINB003XU1RGK

हमी आणि समर्थन

For warranty information, technical support, or to order replacement parts, please contact GRAFF customer service or visit their official webसाइट. वॉरंटी दाव्यांसाठी तुमचा खरेदीचा पुरावा जपून ठेवा.

GRAFF Official Webसाइट: www.graff-designs.com

संबंधित कागदपत्रे - G2101LM20MOB

प्रीview Graff Showerheads and Bodysprays Installation Instructions
Comprehensive installation guides for various Graff showerheads and bodysprays, including models like AQUA-SENSE G-8201, G-8200, G-8210, G-8576, Bodysprays 8495, 8497, Handshower Set W/Wall Bracket 8649, and various Thermostatic Valves and Stop/Volume Control Valves.
प्रीview GRAFF G-8188-LM60C20-T VIGNOLA Series Parts Diagram
स्फोट झाला view parts diagram for the GRAFF G-8188-LM60C20-T VIGNOLA Series valve trim, listing all components with their corresponding numbers.
प्रीview गेबेरिट सिग्मा इंस्टॉलेशन सूचनांसाठी GRAFF फ्लश प्लेट
गेबेरिट सिग्मा आणि टीईसीई सिस्टीमसाठी डिझाइन केलेल्या GRAFF फ्लश प्लेटसाठी तपशीलवार स्थापना मार्गदर्शक, ज्यामध्ये भागांची यादी, परिमाणे आणि साफसफाईच्या सूचनांचा समावेश आहे.
प्रीview ग्राफ शॉवर आर्म्स इन्स्टॉलेशन सूचना आणि तपशील
ग्राफ आर्ट ऑफ बाथ शॉवर आर्म्ससाठी अधिकृत स्थापना सूचना आणि तपशीलवार तपशील. हे मार्गदर्शक मॉडेलचे परिमाण, कनेक्शन प्रकार, स्थापना चरण आणि काळजी शिफारसी प्रदान करते. NSF61/9, ASME/ANSI A112.18.1 आणि CSA B125 मानकांचे पालन करते.
प्रीview GRAFF G-8186-LM60E0-T VIGNOLA Series Valve Trim Technical Specifications
Detailed technical specifications and dimensions for the GRAFF G-8186-LM60E0-T VIGNOLA Series two-handle valve trim, including rough-in dimensions and wall mounting information.
प्रीview GRAFF G-8186-LM60E0-T VIGNOLA Series Valve Trim Parts Diagram
स्फोट झाला view parts diagram for the GRAFF G-8186-LM60E0-T VIGNOLA Series valve trim, listing all components and rough-in valve compatibility.