1. परिचय
The Bogen Power Vector V250 Ampलाइफायर एक उच्च-कार्यक्षमता ऑडिओ आहे amplifier designed for professional sound installations. This manual provides detailed instructions for the proper setup, operation, and maintenance of your ampइष्टतम कामगिरी आणि दीर्घायुष्य सुनिश्चित करण्यासाठी लिफायर.
This series of modular input amplifiers offers models ranging from 35 to 250 watts of power. The V250 model accepts up to 8 plug-in modules, featuring 4 levels of priority between modules. Two module bays are also compatible with signal-processing output modules. Each input includes an independent volume control and a signal/clip indicator. An 11-segment LED meter displays the output level, and a motorized master volume control allows for precise remote operation (remote control panels sold separately).
2. सुरक्षितता माहिती
हे उपकरण चालवण्यापूर्वी कृपया सर्व सुरक्षा सूचना वाचा आणि समजून घ्या. या सूचनांचे पालन न केल्यास विजेचा धक्का, आग किंवा गंभीर दुखापत होऊ शकते.
- उर्जा स्त्रोत: कनेक्ट करा amplifier only to the specified power supply voltagयुनिटवर दर्शविल्याप्रमाणे e.
- वायुवीजन: आजूबाजूला पुरेशा वायुवीजनाची खात्री करा ampलाइफायर. वायुवीजन उघडण्या बंद करू नका.
- ओलावा: उघड करू नका amplifier to rain or moisture. Do not place objects filled with liquids on the unit.
- सर्व्हिसिंग: Refer all servicing to qualified service personnel. Do not attempt to service this unit yourself.
- स्वच्छता: Disconnect power before cleaning. Use a dry cloth for cleaning.
२. बॉक्समध्ये काय आहे?
अनपॅक करताना, कृपया खाली सूचीबद्ध केलेल्या सर्व वस्तू उपलब्ध आहेत आणि चांगल्या स्थितीत आहेत याची पडताळणी करा:
- बोगेन पॉवर वेक्टर V250 Ampअधिक जिवंत
- पॉवर कॉर्ड
- वापरकर्ता मॅन्युअल (हा दस्तऐवज)
4. सेटअप
Follow these steps to set up your Bogen Power Vector V250 Ampजीवनदायी:
- प्लेसमेंट: ठेवा amplifier on a stable, flat surface with adequate ventilation. Ensure there is sufficient space around the unit for airflow. Avoid placing it near heat sources or in direct sunlight.
- वीज कनेक्शन: याची खात्री करा amplifier's power switch is in the OFF position. Connect the provided power cord to the ampलाईफायरचा पॉवर इनपुट आणि नंतर योग्य एसी पॉवर आउटलेटमध्ये.
- स्पीकर कनेक्शन: तुमचे स्पीकर कनेक्ट करा amplifier's speaker outputs. The V250 is capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads. Ensure correct polarity (+ to + and - to -) for all connections. Refer to the amplifier's rear panel for specific terminal markings.
- Input Module Installation (if applicable): If using plug-in input modules, carefully insert them into the designated module bays on the amplifier. Ensure they are securely seated. The amplifier supports up to 8 input modules.
- ऑडिओ स्रोत कनेक्शन: Connect your audio sources (e.g., microphones, CD players, mixers) to the appropriate input jacks on the installed modules.
Figure 1: Front panel of the Bogen Power Vector V250 Ampही प्रतिमा दाखवते की amplifier's front face, featuring eight individual input volume knobs (Input 1 through Input 8), dedicated Treble and Bass controls, an 11-segment LED output level meter, a large Master volume knob, and a power switch. The Bogen logo is visible on the left side.
5. ऑपरेटिंग सूचना
एकदा द ampलाइफायर सेट अप झाले आहे, ऑपरेशनसाठी या चरणांचे अनुसरण करा:
- पॉवर चालू: Flip the Power switch to the ON position. The power indicator light should illuminate.
- मास्टर व्हॉल्यूम: Start with the Master volume control set to its minimum position.
- Input Volume Controls: Adjust the individual input volume controls (Input 1-8) for each connected audio source. The signal/clip indicator for each input will help you set appropriate levels without distortion.
- टोन नियंत्रणे: Use the Treble and Bass controls to adjust the overall tonal balance of the audio output to your preference.
- Output Level Monitoring: Monitor the 11-segment LED output level meter to ensure the audio signal is not clipping (exceeding maximum output). You can switch between Peak and Average metering using the Avg/Peak switch.
- मास्टर व्हॉल्यूम समायोजित करणे: Slowly increase the Master volume control to achieve the desired overall listening level.
- रिमोट कंट्रोल (पर्यायी): If using a remote control panel (sold separately), the motorized master volume control allows for smooth and accurate adjustment from a distance.
6. देखभाल
योग्य देखभाल तुमच्या कारचे दीर्घायुष्य आणि इष्टतम कामगिरी सुनिश्चित करते ampजीवनदायी:
- स्वच्छता: नियमितपणे पुसून टाका amplifier's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- वायुवीजन: Periodically check that the ventilation openings are clear of dust and debris. Use a soft brush or compressed air to gently clean them if necessary.
- कनेक्शन: सर्व केबल कनेक्शन सुरक्षित आणि गंजमुक्त आहेत याची खात्री करण्यासाठी अधूनमधून तपासा.
- स्टोरेज: संचयित करत असल्यास ampजास्त काळासाठी लाईफायर बंद ठेवा, तो वीजपुरवठा बंद करा, स्वच्छ करा आणि थेट सूर्यप्रकाश आणि अति तापमानापासून दूर थंड, कोरड्या जागी ठेवा.
7. समस्या निवारण
If you encounter issues with your Bogen Power Vector V250 Ampलाइफायरसाठी, खालील सामान्य समस्या आणि उपाय पहा:
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| शक्ती नाही | पॉवर कॉर्ड जोडलेला नाही; पॉवर स्विच बंद; फ्यूज उडाला; पॉवर आउटलेटमध्ये समस्या. | Ensure power cord is securely connected. Turn power switch ON. Check and replace fuse if necessary (refer to service manual). Test power outlet with another device. |
| आवाज आउटपुट नाही | Speaker connections loose/incorrect; Input source not connected/active; Volume controls too low; Mute engaged. | Check all speaker connections for correct polarity and security. Verify audio source is connected and playing. Increase Master and individual Input volume controls. Ensure no mute function is active. |
| विकृत आवाज | Input level too high; Speaker impedance mismatch; Faulty cables. | Reduce individual input volume levels. Check the LED meter for clipping. Ensure speaker impedance matches amplifier output. Replace audio cables if suspected faulty. |
| जास्त गरम होणे | Insufficient ventilation; Overloaded output. | खात्री करा amplifier has adequate airflow around it. Reduce output load or use speakers with appropriate impedance. |
If the problem persists after trying these solutions, please contact Bogen customer support or a qualified service technician.
8. तपशील
Technical specifications for the Bogen Power Vector V250 Ampजीवनदायी:
- पॉवर आउटपुट: 250 Watts RMS (part of the series ranging from 35W to 250W)
- Speaker Loads: Supports 70V, 25V, 8-ohm, and 4-ohm
- Input Bays: Up to 8 plug-in module bays
- Output Module Bays: 2 bays for signal-processing output modules
- नियंत्रणे: Independent volume control per input, Master volume, Treble, Bass
- निर्देशक: Signal/clip indicator per input, 11-segment LED output level meter (Peak/Average switchable)
- परिमाणे: ४.७ x ३.९ x ३.९ इंच (उत्पादन परिमाणे)
- वजन: १४ औंस (वस्तूचे वजन)
- मॉडेल क्रमांक: V250
- ASIN: B001Q4A8HE
- निर्माता: बोगेन
- प्रथम उपलब्ध: 1 सप्टेंबर 2003
टीप: उत्पादन सुधारणेसाठी सूचना न देता तपशील बदलू शकतात.
9. हमी आणि समर्थन
Bogen products are designed for reliability and performance. For information regarding warranty coverage, technical support, or service, please refer to the official Bogen webसाइट किंवा त्यांच्या ग्राहक सेवा विभागाशी संपर्क साधा.
Optional protection plans may be available for extended coverage. Please check with your retailer or Bogen for details on available plans.
Bogen Communications, Inc.
www.bogen.com
