Schlage SP455A3 Kick Down Door Holder Instruction Manual

1. उत्पादन संपलेview

The Schlage SP455A3 Kick Down Door Holder is designed to provide a simple and effective method for holding doors open. Constructed from cast aluminum with a bright brass finish, it features a 4-inch arm and a durable rubber foot for secure engagement with the floor surface. This unit is activated and released with a touch of the foot, offering convenient operation.

Figure 1: Schlage SP455A3 Kick Down Door Holder. This image displays the door holder with its 4-inch arm and rubber foot, presented in a bright brass finish.

प्रमुख वैशिष्ट्ये:

• साधे ऑपरेशन: Engage and release the door holder with a foot.
• टिकाऊ बांधकाम: Made from cast aluminum for longevity.
• सुरक्षित धरून ठेवा: Features a rubber bottom to prevent slipping.
• Optimal Clearance: Designed for doors with a door-to-floor clearance of 2 inches or less.
• समाप्त: Bright Brass.

2. पॅकेज सामग्री

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा.

• Schlage SP455A3 Kick Down Door Holder (1 unit)
• माउंटिंग हार्डवेअर (स्क्रू)

3. स्थापना सूचना

This door holder is designed for door mount installation. Ensure the door-to-floor clearance is 2 inches or less for proper function.

आवश्यक साधने:

• पेन्सिल
• मापन टेप
• Drill with appropriate drill bit (for pilot holes)
• स्क्रूड्रायव्हर (फिलिप्स हेड शिफारसित)

स्थापना चरण:

1. माउंटिंग स्थान निश्चित करा: Position the door holder on the lower edge of the door, ensuring it is within reach for foot operation and that the rubber foot will make firm contact with the floor when engaged. The ideal location allows the door to open to the desired angle.
2. क्लिअरन्स तपासा: With the door holder temporarily held in place, ensure that the distance from the bottom of the door to the floor is 2 inches or less. This ensures the rubber foot can effectively engage the floor.
3. मार्क स्क्रू होल्स: Using a pencil, mark the locations for the mounting screws through the pre-drilled holes on the door holder base.
4. पायलट छिद्र ड्रिल करा: Carefully drill pilot holes at the marked locations. Use a drill bit slightly smaller than the screw diameter to prevent wood splitting.
5. Attach Door Holder: Align the door holder with the pilot holes and secure it firmly to the door using the provided mounting screws and a screwdriver. Do not overtighten.
6. चाचणी ऑपरेशन: Once installed, test the door holder by pushing down on the arm with your foot to engage it and lifting it to release.

4. ऑपरेटिंग सूचना

The Schlage SP455A3 Kick Down Door Holder is designed for simple, foot-activated use.

1. गुंतण्यासाठी: With your foot, gently press down on the top of the door holder's arm until the rubber foot makes firm contact with the floor and the door is held in place.
2. रिलीझ करण्यासाठी: With your foot, gently lift the arm of the door holder upwards. The rubber foot will disengage from the floor, allowing the door to move freely.

5. देखभाल

Regular maintenance ensures optimal performance and extends the life of your door holder.

• स्वच्छता: Wipe the metal components with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners that may damage the finish.
• Rubber Foot Inspection: Periodically check the rubber foot for wear or damage. A worn rubber foot may reduce the holder's ability to grip the floor. Replacement rubber tips may be available from the manufacturer.
• स्क्रू घट्ट करा: If the door holder becomes loose, gently tighten the mounting screws. Do not overtighten.

6. समस्या निवारण

7. तपशील

8. हमी आणि समर्थन

For specific warranty information, please refer to the documentation included with your product or visit the official SCHLAGE website. SCHLAGE products are backed by a commitment to quality and durability.

If you require technical assistance or have questions regarding your Schlage SP455A3 Kick Down Door Holder, please contact SCHLAGE customer support. Contact details are typically available on the manufacturer's webसाइट किंवा उत्पादन पॅकेजिंग.