MPOW logo

Mpow MX3 - MP3

PACKING LIST

Mpow MX3 - PACKING LIST

DIAGRAM

Mpow MX3 - DIAGRAM

POWER ON

Mpow MX3 - POWER ON

 1. The earphones automatically turn on(with blue LED light flashing) and start pairing when you open the charging case.
2. In the shutdown status and when the earphones are not in the charging case. simultaneously press and hold the MFB of both earbuds for 2 seconds to power on ( with the blue LED light flashing).

POWER OFF

Mpow MX3 - POWER OFF

1. Put the earphones back in the charging case and close the case to turn them off.
2. If the earphones are not in the charging case just press and hold the MFB of either earbud for 5 seconds to power them off. ( Mode 2 cannot be conducted during music playing or calling.)

PAIRING

Mpow MX3 - PAIRING

Open the charging case. they will automatically enter the pairing mode in which the LED light flashes blue and red alternately and then select “Mpow MX3”.
Note The earbud will reconnect to the paired device by priority. If you want to pair to the second smartphone. please disconnect Bluetooth on the paired smartphone.

MUSIC

Mpow MX3 - MUSIC

INCOMING CALL

Mpow MX3 - CALL

MUSIC & INCOMING CALL & Siri

Volume Up / Down
Volume+: Press and hold the MFB button of Right earbud to turn up the volume increasingly.
Volume-: Press and hold the MFB button of Left earbud to turn down the volume decreasingly.
Next / Previous Track
Next Track Triple-tap the MFB of Right earbud.
Previous Track Triple-tap the MFB of Left earbud.
Play / Pause
Double-tap the MFB of either earbud.
Answer
Tap the MFB of either earbud once.
Mute
When you are having a phone call, you can tap either earbud once to mute or unmute the earbud’s microphone.
Hang up
Double-tap the MFB of either earbud.
Reject
Press and hold the MFB of either earbud for 1 second.
Activate Siri
When in standby and music mode, firstly tap the MS of either earbud once, and then instantly press and hold the earbud for 1 second.

RESET

Mpow MX3 - RESET

1. Make sure Bluetooth is turned off in your device
2. When both earbuds are in the charging caca. simultaneously press and hold both earbuds for 10 seconds to clear paired devices.
3. The earbud’s light will flash red and blue simultaneously, which means successful resetting.

CHARGING

Mpow MX3 - CHARGING

Mode2: Wireless Charging

Mpow MX3 - MODE 2

Note: wireless charger is sold separately.

Mpow MX3 - MODE
Do not put the earbuds in the charging case when the earbuds are wet

CORRECT DISPOSAL OF THIS PRODUCT

Recycle( Waste Electrical& Electronic Equipment ) This Marking shown on the product or its literature indicates that it should not be disposed of with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal. please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office. for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contact This product should not be mixed with other commercial wastes for disposal.

FCC STATEMENT

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1 ) This device may not cause harmful interference. and
(2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment

Documents / Resources

MPOW Mpow MX3 [pdf] User Manual
Mpow MX3, BH480B

Leave a comment

Your email address will not be published.