MOZA FLIGHT FMP18 Panel Bundle User Manual

MOZA FLIGHT FMP18 Panel Bundle

Dimension

What’s in the box

• FPP Front Panel Module x1
• DDI Display Panel x2
• AMPCD Display Panel x1
• USB-A to USB-A Cable x3
• USB-A to USB-C Cable x1
• Desk Mount Assemblies x2
• Side Mounting Brackets x2
• Bottom Mounting Bracket x1
• M5Screwsx4
• M4 Screws x30
• M8Wrenchx1
• 3mm Allen Key x1

User Guide

Unboxing &Assembly

Button Frame and Display Assembly

• The button frame and display panel connect via a magnetic attachment.
• Follow the indicated orientation and ensure the pogo pin connectors on the frame align with the contact points on the display.

Display Panels & Mounting Brackets Assembly

• Assemble the mounting brackets onto the rear of the display panels as shown.
• Secure each bracket by tightening the M4 screws into the mounting holes using the included 3.0 mm Allen key.

Desk Mount Assembly

• Assemble the desk mounts using the M4 screws and the 3.0 mm Allen key, as illustrated.
• Then, attach the mounting bracket to the back of the display panel and secure it with M4 screws using the Allen key.

Adjusting the Desk Mount Angle
Loosen the indicated screws using the MB wrench to adjust the angle. Once the desired angle is set, tighten the screw securely.

Mounting Options

Desk Mounting

• Clamp the desk mount onto the edge of your desk and tighten the threaded rod to secure the device.
• Supported desk thickness: 10 to 70 mm.

Note:
Do not mount the device on fragile surfaces such as glass.

Aluminum Profile Mounting

• Insert T-nuts into the aluminum profile.
• Align the mounting holes with the T-nuts and secure the bracket by tightening the screws into the T-nuts.

Note:
Aluminum profile mounting hardware (aluminum profiles, T-nuts, screws, comer brackets, etc) is not included and must be purchased separately.

Connecting to a PC

Use the included USB cables

Display Panels (DDI & AMPCD):

• Use a USB-A to USB-A cable for each panel.
• Connect one end to the panel and the other to your PC.
• The screen brightness can be adjusted using the buttons on the back.

FPP Module:

• Use the USB-A to USB-C cable.
• Connect the USB-C end to the FPP and the USB-A end to your PC. Once connected successfully:
• The device indicator light will turn on.
• The device will appear as connected in MOZA Cockpit software.

Note: 

• All USB-A ports are USB 3.0. Using USB 2.0 cables may cause malfunction.
• If the device light flashes continuously after powering on, it may indicate insufficient power. Use an additional SV USB-C cable to provide external power to the display.
• If using a USB hub, a powered (externally powered) USB hub is recommended.

Software Overview

Main Page

Select FMP18 from the device list in the sidebar to access its dedicated settings interface.

• Panel Settings
  Within this interface, you can select individual panels and adjust their lighting effects, or choose a brightness control mode. The available modes include:
• Telemetry Mode
  Brightness is linked to a selected telemetry parameter, enabling synchronized lighting with the in-game cockpit.
• Device Mode
  Brightness is linked to device axis inputs, including axes from other MOZA Flight hardware.
• Manual Mode
  Adjust the panel brightness directly through the software.

Screen Settings 

• In the Screen Settings, you can map each display to its physical mounting position.
• Once your FMP18 mounting layout is confirmed, assign the corresponding screen IDs and click Apply to automatically configure screen export for all supported aircraft.

Precautions 

• Do not expose the device to liquids or humidity as it may cause fire or electric shock.
• Avoid using the device in direct sunlight.
• Do not use MOZA flight sim gear with the MOZA racing gear.
• Recommended indoor temperature: 5°C~30°C.
• For your safety and well-being, please monitor your gaming time and take breaks as needed.
• The device is not suitable for children under the age of 6, small accessories may pose a choking hazard.
• Children under 13 should have adult supervision.
• It is strictly forbidden to disassemble the equipment by yourself, failure to adhere to this will result in loss of warranty.
• The equipment must be connected with the factory-supplied power supply to ensure the electrical safety and the protection of user rights and interests.
• In order to ensure user safety, parts repair of replacement can only be carried out by officially authorized repair centers.
• Non-standard power supplies are strictly prohibited even if data such as related voltages match.
• Use only AC power provided by a standard wall outlet to avoid damage to the product.
• Do not expose the device to heat sources.
• Unplug the power cord of the device if it will not be used for a long time.
• If you find any abnormality, please stop using it immediately and seek help from MOZA representatives or authorized repair centers.
• Stay tuned to our official website and social media platforms for the latest product updates.

Manufacturer:

• Shenzhen Gudsen Technology Co., Ltd
• Address: Room 1903-1904, Building 3, Nanshan ZhiyuanChongwen Park, No. 3370 Liuxian Avenue, Nanshan District, Shenzhen China
• Web: www.mozaracing.com
• E-mail: info@mozaracing.com

Made in China