MOWETOO LE-8613d UV Torch LED
PRODUCT INFORMATION
- PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT IN A SAFE PLACE
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE PROBLEMS ABOUT THE PRODUCT, PLEASE TRY FIRST TO CONTACT US WITH YOUR ORDER ID, OR YOU CAN CHOOSE TO CONTACT US STRAIGHTLY WITH OUR OFFICIAL EMAIL eugaodale@163.com
Specification
- Size
- 35mm (Head Diameter) X 135mm (Length)
- Weight
- 200g
- Battery Type
- 3* AAA Batteries
- Meterial
- Aluminium Alloy
How to install
User instruction
- REMOVE THE PLASTIC FILM FROM THE BATTERY WHEN YOU FIRST USE.
- Please note that the positive pole of the battery is toward inside(the blub side) and the negative pole is outward(the butt on side)
- There is a switch on the side of the flashlight.
- a. Press the switch to turn on/off the light;
- b. Slightly press the switch to change the modes. (Just press half of the button),
- Rotate the flashlight head to change the focus.
If the abnormal phenomenon is excluded:
- Check the battery:
- a. Whether the clear plastic film was removed before the first use.
- b. Do not place the battery in a device with the (+) and (-)in the wrong way around.
- c. Do not use batteries of different brands. New batteries can not mix with old ones in use.
- Check the tail cap: ensure the switch is tightened and well connected.
- Please note whether the flashlight head is loose or not.
Safety tips
- The flashlight has a high brightness, please do not shine people’s naked eyes or look at the light as it can damage the eyesight, especially for children.
- The battery shall be prevented from being exposed to sunshine, water, chemicals or etchant gases so as not to damage its surface.
Documents / Resources
 |
MOWETOO LE-8613d UV Torch LED [pdf] Instruction Manual LE-8613d UV Torch LED, LE-8613d, UV Torch LED, Torch LED |