MOUNTUP TV Wall Mount Bracket Installation Guide

MOUNTUP TV Wall Mount Bracket Installation Guide

Safety Caution

Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.

• This product is designed for use in wood stud and solid concrete wall.
  • DO NOT install into drywall alone.
• The wall must be capable of supporting five times the weight of the TV and mount combined.
• Do not apply this product to any purpose not indicated by MOUNTUP.
• Incorrect installation may result in product damage or body injury. MOUNTUP shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.

WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage,
please contact us

Must Check Before Getting Started

Installation Tools (Not Included)

Supplied Parts and Hardware

NOTE: Not all hardware included will be used

STEP 1 Attach the TV Brackets

1-1 Select TV Screws

1-2 Need Spacer?

I Yes, choose the appropriate screws, washers,and spacers for your TV

II No, just choose the screws, washers.

1-3 Attach the TV Brackets 

STEP 2 Attach Wall Plate to Wall

OPTION A: Wood Stud Installation

2A-1 

2A-2 

2A-3

Be sure to drill into the center of the stud.

2A-4 

CAUTION: To avoid potential personal injury or property damage:

All 4 lag bolts   MUST BE  firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

To prevent the TV falling down, the Arrow Must Keep UP at this step!!

Install wall plate using lag bolts and washer with Socket Wrench, NO Electrodrill.

CAUTION: Do not use in drywall or wood.

OPTION B: Solid Concrete Wall Installation

2B-1

2B-2

2B-3

2B-4

CAUTION: To avoid potential personal injury or property damage:

All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.

To prevent the TV falling down, the Arrow Must Keep UP at this step!!

Install wall plate using lag bolts, washer and anchor with Socket Wrench, NO Electrodrill.

STEP 3 Hang and Secure TV to Wall Plate

3-1 Wall Plate Installation Integrity Test

Before hanging TV, please conduct “wall plate installation integrity test” first

99 LBS (45KG)

 

3-2 Hang and Secure TV to Wall Plate

 

STEP 4 Adjustments

Tilting adjustment (+10°~-10°)

Pull TV to your desired angle then fasten 2 tilting bolts with hands.

Take down the TV from the Mount (If necessary)

Product Dimensions