MONTECH MKey PRO Mechanical Gaming Keyboard Instruction Manual

Step 1: Download and Install QMK Toolbox

Step 2: Get Ready for QMK Toolbox

1. Click “Open”.
2. Find out the bin document which is provided by MONTECH.
3. Click “MCU” and select “ATmega32U4”.
4. Choose “Auto-Flash”.

Step 3: Get Ready for MKey PRO

1. Set the switch to USB mode.
   Connect the cable between MKey PRO and the device.
2. Press and hold “ESC” key.
3. Remove the cable (Type-C) from MKey PRO.
4. Connect the cable(Type-C) to MKey PRO again.
   Release the “ESC” key you kept pressing.

Step 4: Finish the Update Process

1. After step 3, you will see “Flash complete”.
2. Remove the cable (Type-C) from MKey PRO again.
   Connect the same cable (Type-C) to MKey PRO again.
   MKey PRO’s ARGB will be turned on again.
   The whole process is finished.

bin Documents

◼ ANSI_MKey PRO_241127
◼ ISO_MKey PRO_241127
– Released on Nov 27th, 2024.
– Update Ins and End hotkey (Fn+PgUp=Ins / Fn+PgDn=End).
– Update Fn+F4 (F4), knob must be functional even the light is off.

Documents / Resources

	MONTECH MKey PRO Mechanical Gaming Keyboard [pdf] Instruction Manual ANSI_MKey PRO_241127, ISO_MKey PRO_241127, MKey PRO Mechanical Gaming Keyboard, MKey PRO, Mechanical Gaming Keyboard, Gaming Keyboard
	MONTECH MKey PRO Mechanical Gaming Keyboard [pdf] User Manual MKey PRO Mechanical Gaming Keyboard, MKey PRO, Mechanical Gaming Keyboard, Gaming Keyboard

References

• User Manual