MONSTERTECH Sim Stand Wheel

Product Specifications
- Universal Connector: M8x30
- Profile Cap Assembly: M6 and M8 screws
- Wheel Dimensions: Various sizes (refer to manual)
- Compatibility: Suitable for common flight and racing simulator accessories
- Age Recommendation: Suitable for children over 12 years and adults
Product Usage Instructions
General Assembly Information
Ensure you have a hex key set with a ball head or extension for assembly.
Assembly Steps
- Prepare the universal connector by sliding in the very loose pre-assembled M8x30 connector, or use the alternative slot nut M8.
- Use suitable screws for your wheel to attach it securely.
- Assemble the wheel front using the provided M8x14 black screws and washers.
- Check all screws are tightened before usage to avoid any mishaps.
Compatible Wheels
The product is compatible with wheels that meet the following dimensions: 167.5mm x 24.3mm x 17.4mm.
GENERAL ASSEMBLY INFO AND HOW TO PROFILE NUT

HEX KEY SET WITH BALL HEAD
EXTENSION OR SIMILAR REQUIRED
UNIVERSAL CONNECTOR

ALTERNATIVE


BOLT DIMENSIONS
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
PROFILE CAP ASSEMBLY

PARTS
WHEEL FLAT
WHEEL FRONTAL
ASSEMBLY

Compatibility
- Fanatec Base
- DDI / DD2 / CSL DD / DD PRO CSL Elite
- CAMMUS LP8 Base
- MOZA R9 / R16 / R21
- SIMCUBE Mount
- Simagic Alpha EVO Wheel Base
- Trustmaster
- TX Servo Base
- TS-XW Servo Base
- T-GT und T-GT 11 Racing Wheel
- T 248 / T 300 / T300RS / T500RS
- Trustmaster
- T818 Base (with mounting kit)
- Logitech
- G25/G27/G29/G920/G923
- PRO Racing Wheel

ASSEMBLY FOR FRONTAL WHEEL
Compatible Wheels:
- SimXperience AccuForce Pro V2
- Lenze MCS Electro Motor
- MIGE 130ST Electro Motor
- SimuCube 2 Sport, Pro, Ultimate
- Simagic Alpha EVO Wheel Base
- Sensodrive SensoWheel SD-LC


SAFETY INSTRUCTION
WARNING NOTICES
CAUTION! Do not clamp your fingers while assembling the Sim Stand Wheel.
CAUTION! Check before usage if all screws are tightened.
DANGER: Contains small parts not suitable for children under 3 years.- Only suitable for children over 12 years and adults.
- All MTSIM products are hand assembled and quality checked.
- The Sim Stand is only for the use of common flight and racing simulator accessories in conjunction with MTSIM mounts.
- We exclude liability if the product is used for purposes other than intended.
- MTSIM shall be liable for damage arising from causes other than the detriment to life, body, and health only to the extent that such damage arises from wilful misconduct, gross negligence or the culpable violation of a fundamental contractual obligation on the part of MTSIM or a vicarious agent (e.g., the delivery service) of MTSIM. Any further liability for damages shall be excluded.
- If you have safety concerns or questions regarding assembly, contact us under info@mtsim.com or visit www.mtsim.com/en/
Frequently Asked Questions
What is the recommended age for using the Sim Stand Wheel?
The Sim Stand Wheel is recommended for children over 12 years and adults.
Documents / Resources
![]() |
MONSTERTECH Sim Stand Wheel [pdf] Instruction Manual SimXperience AccuForce Pro V2, Lenze MCS Electro Motor, MIGE 130ST Electro Motor, SimuCube 2 Sport, Pro, Ultimate, Simagic Alpha EVO Wheel Base, Sensodrive SensoWheel SD-LC, Sim Stand Wheel, Stand Wheel, Wheel |

