MTS Base Frame
“
Product Information
Specifications
- Dimensions: Various sizes as per manual
- Material: Metal
- Color: Black
Product Usage Instructions
Assembly
1. Prepare universal connectors (loose fit) and slide in
paired.
2. Use a flat surface for assembly.
3. Tighten slightly until all profiles are in place.
Installation of Additional Profiles
If you want to install an MTS Motion Qubic Extension Set,
install the corresponding additional profiles now.
Mounting the Feet
Place two feet in the middle of the profiles and four at the
ends.
Height Adjustment
For uneven floors, adjust the height and tighten the nut after
adjustment.
Seat Width Adjustment
If your seat has a different mounting width, you can leave
specific profiles away. Ensure to tighten bolts after
adjustments.
Pedal Mounting
Choose a position where the profile doesn’t block your pedal
mounting bolts.
FAQ
Q: Can I use Monstertech Center Joystick with this base
frame?
A: No, Monstertech Center Joystick won’t fit if you want to use
a center joystick. Follow the manual instructions for proper
installation.
Q: Are there spare parts included?
A: No extra or spare parts are listed in the manual. Ensure all
parts are used as per instructions to complete assembly.
“`
MTS BASE FRAME
Instruction Manual Bedienungsanleitung
Mode d`emploi
PARTS – BASE FRAME
2x
80
2x
1400
80
80
550
80
2x
40
1x
320
80
40
475 80
1x
475 40
2x
475 40
2x
400 40
80
80
80
40
40
40
2x
305 40
2x
70 40
2x
70 40
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
2
1x
1x
BAG 1
6x
8 0
80
40x
Ø 8
40x
30
16x
16
8
flat head black
4 0
4x
80
62x
M8
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
3
5
BAG 2 (feet)
6x
6x
M8
6x
15
8,4
6x
8,4 24
6x
M8
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
4
ASSEMBLY
M8x30 Ø8mm
slot nut M8
Prepare universal connectors (loose fit) and slide in paired.
1400 mm
m m 475
1400 mm
detail
Use a plan surface for assembly.
Tighten slightly until ALL profiles are placed.
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
5
100 mm
320 mm 320 mm
475 mm
100 mm
320 mm
top view
320 mm
mm 475
If you want to install an MTS Motion Qubic Extension Set, you should now install the corresponding additional profiles.
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
6
Tighten all bolts now!
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
7
Mounting the feet. Two in the middle of the profiles. Four at the ends.
6x
feet
flat nut M8 spacer 5 mm washer Ø24 mm
slot nut M8
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
8
height adjustment for uneven floor
tighten nut after height adjustment
MTSIM MTS BASE FRAME INSTRUCTION MANUAL
9
70 mm 70 mm
2x 400 mm
4x slot nut M8 MTSIM MTS BASE FRAME INSTRUCTION MANUAL 10
4x
M8x30
1.
2.
universal
3.
connector
Tighten slightly until all profiles are placed.
universal connectors outer side
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 11
If your seat has a different mounting width you can leave these profiles away.
ATTENTION! Monstertech Center Joysick woun`t fit for other seat width!
Leave this profile away if you want to use a center joystick!
112350 mmmm
Tighten bolts now.
112350 mmmm
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 12
550 mm
Tighten bolts slightly. approx. 150 mm Mount profile and then tighten bolts.
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 13
4x slot nut M8
Same assembly on both sides of the rig.
4x slot nut
M8
place all caps
8x M8x16 flat head black
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 14
PARTS – PEDALS / RUDDER
2x
550
2x
40
384 40
1x
1x
40 40
[dimensions in mm / different scales] No extra or spare parts listed!1x
Pedal mounting plate as ordered. Hole pattern could change by updates
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 15
BAG 3 (pedals / rudder)
2x
40
4 0
8
Ø 8
4x
30
8x
16
black
6
6x black
14
4x black
12
Ø6
2x
40
4x
12x
M8
10x
M6
8x black
8,4 16
4 0
BAG 4
with various bolts and nuts for mounting your pedals.
BAG 5
various tools
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 16
ASSEMBLY
Use a plan surface for assembly.
thread
384 mm
Choose a position where the profile didn`t block your pedal
mounting bolts.
thread
550 mm
4x slot nut
M6
6x slot nut
M6
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 17
plastic caps
M8x16 flat head
black
screwable caps
M8x16 flat head
black
3x M6x14 flat head black
other side too possible distance
adjustment
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 18
4x M6x12 flat head black
another distance adjustment option
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 19
4x slot nut
M8 both sides
Detail on next page.
MTSIM MTS BASE FRAME INSTRUCTION MANUAL 20
Detail
4x washer Ø16
black
4x M8x16 black
other side too
height and angle adjustment
TOOL HOLDER
Mount the tool holder at any place you like.
80×40 mm profile
2x M5x14
40×40 mm profile
2x M5x14
insert the hex keys
insert the profile cleaner
snap in the extension pipe
24-03-2025
Documents / Resources
 |
MONSTER MTS Base Frame [pdf] Instruction Manual MTSIM, MTS Base Frame, MTS, Base Frame |