Multi-mode RGB Mechanical Keyboard<Overview> Multi-mode RGB Meccaniche
Combination keys
Fn+←:Toggle the previous color.
Fns+→:Suitch to the next color.
Bluetooth Pairing
- After powering on the keyboard, press Fn + E/R/T to enter Bluetooth mode, long press to pair.
2.46 Pairing
- After powering on the keyboard, press Fn+y to enter 2.4G mode, Long press to pair.
Battery-Level Check
- After pouering on the keyboard, press Fn + Spacebar to check battery Level.
Indicator
| Reconnecting | Pairing | Successfully Connected | |
| BT1 | Blue |
Blue |
Blue  |
| BT2 | Blue |
Blue |
Blue |
| BT3 | Blue |
Blue |
Blue |
|
Green |
Green |
Green |
 |
White |
| Indicator Position | CEO Status | |
 |
Spacebar  |
Red |
 |
Spacebar |
Green  |
 |
Spacebar |
 |
|
Caps |
Caps |
White |
 |
L_Win |
White |
 |
Above Num |
White |
Key/Lighting Effects Customization Instruction
VIA s a widely recognized software that offers an intuitive interface for configuring and personalizing various keyboard settings. Users can utilize VIA to remap keys and adjust lighting on keyboards with VIA firmware.
Web Version: https://usevia.app/
App: https://github.com/the-via/releases/releases
It enables you to remap keys, create custom macros, customize lighting effects, and more. If you encounter connection issues, please load the corresponding JSON file specific to your keyboard model.
You can download JSON files from our dedicated Download page:
https://www.monsgeek.com/download/
https://monsgeek.eu/pages/download-center
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the ser’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Warning Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
MONSGEEK Warranty and Service Statement
- MONSGEEK provides One-Year warranty for customers in mainland China. For other regions, please contact your seller (MONSGEEK distributor) for specific warranty policy.
- If the warranty window expires, customers need to pay for repairs. MONSGEEK will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happened during self-repair.
- Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty.
- The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.
EU DECLARATION OF CONFORMITY
This declaration of conformity is issued under the sole responsibility of the manufacturer.
(Manufacturer and EC Responsible Person Information)
| Manufacturer Company Name Address |
Shenzhen Yinchen Technology Co., Ltd Bitou Community 1st Industrial Zone, Building 1 STE 101,201,301,401 Emily@monsgeek.com 0769-22114578 |
Product information
| Product Name Model Trade Mark |
Mechanical Keyboard M2 V5 MONSGEEK |
The object of the declaration described above is in conformity with the relevant Community harmonization legislation / EC directives:
| EC directives Testing Standards |
RED Directive 2014/53/EU and LVD Directive 014/35/EU & EMC Directive 2014/30/EU EN IEC 62368-1-2020+A11:2020 ΕΝ 50663: 2017; EN 62479: 2010 ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.4(2020-09) ETSI EN 300 328 V2 2.2 (2019-07) |
Radio Equipment Directive 2014/53/EU
Frequency Bands:2402MHZ-2480MHZ
Maximum Radio Frequency Power Transmitted:10dB
Disposal
The symbol above and on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The Waste of Electrical and Electronic Equipment (WEEE) Directive has been put in place to recycle products using best available recovery and recycling techniques to minimize the impact on the environment treat any hazardous substances and avoid the increasing landfill. Contact local authorities for information on the correct disposal of Electrical or Electronic equipment.
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Yinchen Technology Co., Ltd
Tel:0769-22114578
Website: https://www.monsgeek.com/
https://www.monsgeek.eu/
Address:TowerB, 35th Floor, Evergrande, Jiannan Road, Nanshan District, Shenzhen
Implementation Standard: GB/T 14081-2010
Documents / Resources
 |
MONSGEEK M2 V5 VIA Custom Mechanical Keyboard [pdf] User Manual M2 V5 VIA Custom Mechanical Keyboard, M2 V5 VIA, Custom Mechanical Keyboard, Mechanical Keyboard, Keyboard |