MONSGEEK logoMONSGEEK M1W Multi Modes RGB KeyboardM1W RGB
M1W Multi-modes RGB Keyboard
User Manual
Quick Start Guide

M1W Multi Modes RGB Keyboard

Thank you for supporting MonsGeek MONSGEEK M1W Multi Modes RGB Keyboard - icon
To provide you with a better user experience, please read this manual carefully before using the product.

Packing List

MONSGEEK M1W Multi Modes RGB Keyboard - Packing

System Requirement
Windows® XP/Vista/7/8/10 or higher version
Connectivity Method
Connect the keyboard to your computer by plugging in the USB cable into an available USB port to start using it.

LED Indicator Overview

Status Indicator Re-Connecting Pairing Connected
Bluetooth device 1 LED for Key E Red light blinks slowly Red light blinks fast Red light stays on for 2 seconds and then turns off
Bluetooth device 2 LED for Key R Blue light blinks slowly Blue light blinks fast Blue light stays on for 2 seconds and then turns off
Bluetooth device 3 LED for Key T Yellow light blinks slowly Yellow light blinks fast Yellow light stays on for 2 seconds and then turns off
2.4G wireless device LED for Key Y Green light blinks slowly Green light blinks fast Green light stays on for 2 seconds and then turns off
Wired mode LED for Key U N/A N/A White light stays on for 2 seconds and then turns off
Status Indicator Indicating mode
Low Battery Independent LED Indicator (near spacebar) Red light blinks slowly
Charging Steady red
Fully Charged LED off
Caps LED for Caps Key Steady white
Lock WIN LED for left WIN Key Steady white

M1W RGB HotKeys

MONSGEEK M1W Multi Modes RGB Keyboard - assembly

Fn + F1 = My Computer
F2 E-mail
F3 Windows Search
F4 Browser Homepage
F5 Multimedia Player
F6 Play/Pause
F7 Previous Song
F8 Next Song
P Print SCR
C Calculator
1 Insert
M Mute
< Decrease Volume
> Increase Volume
W Swap WASD with ↑↓ ← →

M1W RGB System Commands (Windows)

MONSGEEK M1W Multi Modes RGB Keyboard - assembly 1

 

Lock Windows Key
Press Fn and Left Win Key
Restore Factory Settings
Hold down Fn and press ~ Key for 5S
Revert Ctrl into Menu Key
Hold down Fn and press right Ctrl for 3S

M1W RGB System Commands (Mac)

MONSGEEK M1W Multi Modes RGB Keyboard - assembly 2

F1 Decrease display brightness
F2 Increase display brightness
F3 Open mission control
F4 Activate Siri
F7 Skip back (Audio)
F8 Pause/Play (Audio)
F9 Skip forward (Audio)
F10 Mute
F11 Volume down
F12 Volume up
Left Win Option
Left Alt Command
Right Alt Command

M1W RGB Backlight Settings

MONSGEEK M1W Multi Modes RGB Keyboard - assembly 3

FN+- Slower Animation
FN+= Faster Animation
FN+ ↑ Bright
FN+↓ Dim
FN+← Set animation direction to left
FN+→ Set animation direction to right
FN+Home Effect1. Effect2、Effect3、Effect4、Effect5
FN+PgUP Effect6. Effect7、Effect8、Effect9、Effect10
FN+End Effect11, Effect12、Effect13、Effect14、Effect15
FN+PgDn Effect16. Effect17、Effect18、Effect19、Effect20
FN+\ This shortcut allows you to set the backlight color to 7 single color with RGB loop effect
FN+L Light Off/On

M1W Wireless/Wired Connection Guide

MONSGEEK M1W Multi Modes RGB Keyboard - assembly 4

Fn+ E = Bluetooth Device 1
R Bluetooth Device 2
T Bluetooth Device 3
Y 2.4G Wireless Device
U Wired mode

MONSGEEK M1W Multi Modes RGB Keyboard - assembly 5The switch is located under the CAPS key
Top: Mac (built-in power supply on)
Middle: Default Windows (built-in power supply off)
Bottom: Windows (built-in power supply on)

Bluetooth Pairing

After turning on the keyboard, press FN+E/R/T to enter Bluetooth mode. Press and hold the FN+E/R/T combination key for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. Once the connection is established, the indicator light will stay on for 2 seconds. If the device fails to connect, the indicator light will turn off and the keyboard will enter sleep mode.

2.4G Pairing

After turning on the keyboard, press FN+Y to enter 2.4G mode. Then press and hold the FN+Y combination key for 3 seconds to enter pairing mode. Then insert the receiver, and the indicator light will flash quickly. Once pairing is successful, the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indiactor will turn off and the keyboard will enter sleep mode.

Battery Level Check

Press the Fn + Space combination keys to check the battery level. If the battery level is below 30%, the space key will show a red light. If it’s between 30-50%, the space key will show an orange light. If it’s between 50-70%, the space key will show a purple light. If it’s between 70-90%, the space key will show a yellow light. If it’s 90-100%, the space key will show a green light.
*Note: It’s the spacebar’s LED that shows the light, not the battery indicator. You can only check it with RGB on in wireless mode(plugging off the USB cable).

Key/Lighting Effects Customization Instruction

  1. The driver can be connected and lighting and key can be customized under the three working modes of the keyboard
  2. The three working modes of the keyboard can be matched to drive the music rhythm
  3. Please download the MonsGeek_setup driver on our website
  4. Users can download the driver via www.monsgeek.com

MONSGEEK Warranty and Service Statement

  1. MONSGEEK provides One-Year warranty for customers in mainland China. For other regions, please contact your seller (MonsGeek distributor) for specific warranty policy.
  2. If the warranty window expires, customers need to pay for repairs. MONSGEEK will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happened during self-repair.
  3. Dissembling the keyboard without manufacturer/seller’s instruction will immediately void the warranty.
  4. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.

Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District, Shenzhen, China
Tel: 0755-23216420
Website: www.monsgeek.com
Origin: Shenzhen, China
WARNING:
Water and Beverages can’t be poured into the Keyboard.
Precautions
Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.

MONSGEEK logoMade in ChinaMONSGEEK M1W Multi Modes RGB Keyboard - icon 2

Documents / Resources

MONSGEEK M1W Multi Modes RGB Keyboard [pdf] User Manual
M1W, M1W Multi Modes RGB Keyboard, Multi Modes RGB Keyboard, Modes RGB Keyboard, RGB Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *