LT604 GPS TRACKER
Rechargeable Battery Powered 4G GPS Tracker
OWNERS OPERATION MANUAL
This product requires a mobile SIM card with voice text and data.
Data only SIM cards are not compatible.
This product is water resistant, not waterproof.
Included;
- 1 x GPS tracker with built-in magnets & Long-Life Battery (see carton for model)
- 1 x USB charger cable
- Free APP for your mobile phone – Android or IOS.
- Free access to the online website
DOWNLOAD THE MOBILE APP
Go to App Store for Apple IOS
Go to Play Store for Android
Search for :- 4G MONGOOSE GPS
WEB ACCESS TO TRACKER
V.LT.24.9
MONGOOSE GPS TRACKERS
Responsible use of GPS products
GPS tracking devices need to be used responsibly, with disclosure and consent of drivers and not breach any privacy rights. Mongoose GPS trackers are not for covert use. You must disclose to any driver/user that you are using a GPS tracking system.
All customers need to ensure that they install and use GPS tracking devices in accordance with all applicable laws, regulations, standards and industry code of conduct.
The LT604 is a battery operated 4G GPS positioning trackers that are designed to transmit its location at intervals of your choice. They also contain LBS (land based system) to give approximate location based on mobile phone cell sites if, for some reason there is no satellite GPS reception. LBS will show which cell tower area the tracker is within – not an actual accurate location. Each tracker contains a high-capacity rechargeable battery. The mobile APP displays the current battery condition. Battery life depends on usage and frequency of location reporting.
The mobile APP and website
Your purchase allows free access to an Apple IOS or Android mobile phone APP as well as free access to the online PC website. The logon to either is password protected making your data more secure.
The APP is a powerful tool and is used for tracker location, historical travel as well as issuing commands that control how the tracker operates.
Location data is stored on the website for upto a continuing 6 month period. More detailed travel history and reporting functions can be found on the website.
Mobile SIM card (not included)
The tracker requires its own mobile SIM card so it can send GPS locations using mobile data to the online website and to your mobile phone.
The trackers SIM card must have the ability for voice, text and data. (data only SIM cards are not compatible)
Due to the nature of this product, a PrePay SIM card is sometimes the most cost efficient especially if choose long term credit expiry and ‘auto top-up’ is selected.
Note: The tracker does not inform you when available credit has been used up.
DUAL PASSWORDS – Double Data Protection & Security
There are 2 separate unique passwords to protect your personal data.
Password 1: This is your logon password to allow entry to the mobile APP and online website. This password is chosen by you when completing the ‘activation wizard’. Default is 222444
Password 2: This password is for text commands sent from the APP or your mobile phone. This password Ichosen by you by selecting ‘text password’ in the ‘command list’. Default is 123456
NOTE: Only reveal your logon and password details to persons who you wish to have full access to the tracker including locations, history and programming options.
GETTING YOUR TRACKER READY
- Fully charge the battery –
- Insert the SIM card
- Turn the tracker on (on/off switch is next to SIM slot)
- Observe the LED’s -
- Download the mobile APP and complete the ‘Activation Wizard’
SIM CARD INSTALLATION
Lift the rubber cover
Insert the SIM card & turn on
Close the dust cover
The LEDs light solid whilst searching for both GSM and GPS signals.
After approximately, 20~40 seconds the LEDs should start to flash. The tracker must be outdoors or very close to a window/door to receive GPS signals.
Once signals are acquired, the tracker can be activated see next page.
After a short while, the LED’s will turn off to preserve battery life.
PLACEMENT – For tracker security and best mobile & GPS reception
The tracker has built-in magnets to assist with attaching the tracker to a vehicle, trailer, equipment or asset.
The tracker must have direct ‘line of sight’ to the GPS satellites. It must not be placed under or surrounded by metal or solid materials or electronic equipment which can block GPS and mobile reception.
If GPS reception is obscured, tracking data may not be collected or be inaccurate.
We strongly recommend experimentation in different placements to get the best reception before deciding on a long-term location.
Ideally, the tracker should be concealed for its security, but remember, you will need access to the tracker for battery recharging purposes.
Placement must also take into consideration the rubber cover over the on/off switch and SIM card slot. This should not be easily accessible to anyone wishing to disable or turn the tracker off.
ACTIVATION WIZARD
DOWNLOAD THE MOBILE APP
Go to App Store for Apple IOS
Go to Play Store for Android
Search for :- 4G MONGOOSE GPS
Note: For this tracker to function correctly and accurately, ensure your mobile phone GPS location services are switched on to allow phone and APP tracking.
THE ACTIVATION WIZARD
Pairing your tracker to the APP and your phone is so easy.
The activation wizard guides you through the process.
All details must be entered. Please have these details at hand;
- Serial number of the tracker
- Phone number of the SIM card used in the tracker
- Your mobile phone number (exclude country code)
- Trackers SIM card ‘APN’ See below
- Choose a unique 6 digit logon password (default is 222444)
The wizard must be completed to unlock all the tracker APP features
Note: Some wizard information is sent from the APP to the tracker as a text message. The APP wizard opens your phones text messages displaying the text code being sent. Just press send. For most commands, a reply text message will be received confirming the action.
The ‘APN’ (Access Point Name) allows your GPS tracker to connect to the internet via the APP, your phone and the mobile network. It is your SIM card providers data channel. BELOW are some APN examples;
| Australia APN | New Zealand APN | ||
| Telstra | telstra.internet telstra.wap | Vodafone | vodafone.net.nz |
| Vodafone | live.vodafone.com | Spark | internet |
| Optus | connect or yesinternet or connectme | 2 Degrees | |
| Aldi | mdata.net.au | Kogan | live.vodafone.com |
| Boost | telstra.mms | The Warehouse | warehouse |
| Moose | yesinternet | Skinny | wapaccess.co.nz |
| AmaySim DODO | internet | Slingshot | |
Contact your SIM card provider if your provider is not listed above or to verify the correct APN.
THE LOGON SCREEN
With the wizard completed, press LOGON.
The logon screen appears
(Also appears each time you open the APP)
- SINGLE TRACKER USERS Enter the trackers ID (serial number) and your password
- FLEET ACCOUNT USERS (For more than one tracker)* Enter your account name and logon password
- Tick the ‘remember me’ box for future logons
You can apply for an account, GPS ACCOUNT FORM is available from the GPS trackers section on mongoose website.
‘REAL TIME’ – LIVE TRACKING
After logging on, the ‘real time’ map screen opens and shows the Current or last viewed vehicles’ location.
This location is the last one recorded by the APP (and GPS website).
The dialogue box gives the time and date of that location.
This could be right now, or sometime previously.
If this screen is left open, a trace line will be drawn showing the route currently being driven.
The green triangle is the tracker – the blue dot is your mobile phone.
The green line shows the direction and distance your phone is from the tracker.
You can view in either map or satellite view.
MENU – takes you to the main menu
LIST – allows you to choose which tracker you wish to view (Account users only)
- Each time the blue circle is pressed, the view changes to what information is displayed.
a. An individual tracker location and distance from your mobile phone
b. The location of your mobile phone
c. All online trackers (account holders with more than one tracker)
NOTE: For this feature to function correctly and accurately, ensure your mobile phone GPS location services are switched on to allow phone and APP tracking.
The top bar shows the trackers status
Single User Menu
- ‘Real Time’ – shows the current or last reported location
- ‘History’ replay todays travel, yesterday or any 24 hour period History is retained for up to 6 months. Page 6
- ‘Text Commands’ allows you to control the tracker
(Uses text messages from your mobile phone) - ‘Messages’ a record of alerts sent to you
- ‘Setup Wizard’ – Allows you to activate additional trackers
- ‘Geofence’ – sets a permitted radius of travel. Page 7
- ‘Tracker info’ – complete all details
- ‘Set APN’ – Allows you to change APN if a different
‘Account’ User Menu
If you have more than one tracker and you wish to view them on your mobile phone, contact Mongoose so we can apply for your own GPS ‘account’.
Main menu
Same as above with an additional button for your account details. As an account holder, you have 4 more buttons at the foot of the screen :-
‘HOME’ – Takes you to the main menu as shown on the right
‘LIST’ – Lets you select which tracker to view.
‘MONITOR’ – Allows you to view all your trackers (online and offline) on your mobile phone at the same time.
‘MESSAGE’ – Shows text messages that have been sent to your mobile phone.
TRACKER INFO’ – Please complete all details
- Edit the device name to one of your choice (This name shows on the map and other screens)
- Enter the vehicles registration number
- Enter the phone number of the trackers SIM card
- Enter the name of the main contact person. (For multiple trackers, you can enter the drivers/users name)
- Enter the paired mobile phone number – ‘master user’
HISTORY PLAYBACK
The history screen allows you to select;
‘Today’ – ‘Yesterday’ – or ‘Custom’ – (any 24 hour period)
Select a 24 hour period, the screen opposite will appear;
- Which tracker is being shown
- Date and time
- Start and end points
- The green trace line is the route taken
- Speed at each location
- Direction of travel
The control buttons at the bottom allow you to zoom in or out, play, pause, change progress and change replay speed.
STRAIGHT LINES ON REPLAY
This tracking device will always attempt mobile connection via the 4G network.
If 4G is unavailable, it will automatically attempt to use a network signal whichever is the strongest signal in the area where the GPS tracker is currently moving. This auto switching can cause a momentary loss of location data whilst searching for a mobile connection.
This can result in odd short straight lines appearing on the replay of a historical journey. The onboard location memory function of the tracker can assist in alleviating these straight lines.
ONLINE WEBSITE
Go to:
www.mongoosegps4g.com
- First select ‘IMEI’ (10 digit ID number)for single tracker users
OR - ‘USER NAME’ if you have a Mongoose GPS account for multiple trackers
- Logon to the website with the same details as the mobile APP.
LOGON PASSWORD
Your ‘logon’ password is chosen by you when completing the ‘activation wizard’.
This can only be changed/updated when logged into the website.
Once logged in, the top right corner will show your trackers or account name. Next to this is a ‘change password’ menu item. Input current password and your chosen new password.
Please make a note of any password changes – best place in ‘notes’ on your phone.
FINDING LOCATION BY SENDING A TEXT MESSAGE FROM ANY MOBILE PHONE
Without using the mobile APP, you can find a trackers location by simply sending a normal text from any mobile phone to the tracker:-
Send:- g123456#
You will receive a text reply.
Tap the blue web address.
The phones map will show trackers location.
Note: 123456 is the default password. If this was changed when completing the wizard, replace the default with your chosen password.
GEO-FENCE (A restricted area of travel)
A geo-fence is an invisible boundary that has a minimum radius of 100m to a maximum of 5000m. The area is easily set from within the APP.
If the tracker moves in or out of the geofenced area it will send an alert to the APP and Website. IT does not send SMS alert.
Multiple geo-fences can be set, for instance, around your home, your place of work, usual parking places, shopping centres, friend’s houses, customers premises, etc.
Especially useful for business for you can tell when an employee arrives or leaves a customers location.
CREATING A GEO-FENCE
- Select ‘Geo-fence’ in main menu
- Press ‘Add New’ top right corner
- Enter a name for your geo-fence
- Press ‘CREATE’
- The map on the right opens.
- Move the map so the crosshairs are over where you want the centre of your geo-fence to be.
- Use the slider bar to increase or decrease the size of the geo-fenced area.
- The text in the centre of the ‘crosshairs’ shows the radius chosen (distance from centre to perimeter).
Min’ 100m – Max’ 5000m - Press the save icon top right.
The geo-fence alert is now automatically ‘on’.
To turn the alerts ‘off’, select ‘geo-fence’ in main menu and a list of created geo-fences appears. To delete a geo-fence by press and hold till the delete options appears.
MOBILE APP COMMANDS
These are commands that can be sent from the mobile APP.
These commands are the most frequently used.
This screen also shows the current status and previous settings.
When commands are sent from the APP to the tracker, they are sent as password protected text messages from your mobile phone. You will notice that the APP opens your phones text messages displaying the command code to be sent to the tracker.
Just press ‘send’.
For most commands, a reply text message will be received confirming the action.
NOTE: Do not send commands listed on the APP directly from your phone (must be via the APP) as the APP’s status will not be updated.
| Command | Function |
| Vibration Alert | Turns text alert on or off. |
| Get Location Data | Provides latitude/longitude as a text message – click on blue text to open your phones mapping system (not APP) |
| Tracking Frequency | Sets how often the tracker updates its location when moving. Default is every 15 seconds – gives accurate trace |
| Time Zone | Set hours ahead of GMT your tracker is located. Adjust for daylight saving when applicable. |
| Vibration Sensitivity | Adjust the sensitivity of the shock sensor. 1~9 (1 most sensitive) |
| Speed Alert | Sets a maximum permitted speed. Speeding sends a text alert |
| Move Alert | Sets a radius of permitted movement once parked. |
| Master User Number | The main users mobile phone number |
| Authorised Number | 2 other permitted users to receive messages (SOS) |
| Text Password | Choose your own 6-digit number. This does not change your logon password |
| Factory Reset | Resets settings to factory default |
ADVANCED USER SMS (TEXT) COMMANDS
The following text commands provide greater control of how the tracker operates and reacts to certain circumstances. Send the commands direct from your mobile phone to the tracker. 123456 is the default password. If you have changed your password, replace 123456 with your password in commands.
| Instruction | Text to tracker | Reply |
| Sleep mode on | SZCS#SLEEPT=3 3 = SLEEP AFTER 3 MINUTES DEFAULT |
SETOK: SLEEPT=3 |
| Sleep mode off | SZCS#SLEEPT=0 | SETOK: SLEEPT=0 |
| TAMPE-DROP alert ON TAMPER DROP alert OFF default |
SZCS#SOS=1 SZCS#SOS=0 |
SETOK:sos=1 SETOK:sos=0 |
| Show authorised (SOS) numbers | sos,XXXXXXXXX,XXXXXXXXX XXXXXXXXX = mobile phone numbers (can use one phone number twice instead of 2 difference phone numbers) |
SOS! S1:XXXXXXXX SOS! S2:XXXXXXXX |
| Cancel Master User Number (Must be sent from master mobile phone) | adm123456, | Adm ok |
| Change text command password (Does not change APP password – see page 8) | pwd123456,XXXXXX 123456 = default xxxxxx = new password |
Pwd ok Keep copy of your new password safe! |
| Use onboard location memory if no mobile reception. | SZCS#blind_en=1 (default 1 = ON) SZCS#blind_en=0 ( 0= OFF) |
SET OK blind_en=1 SET OK blind_en=0 |
| Turn on road corner reporting. Turn off road corner reporting | SZCS#ANGLE_SEND=1 (default 1=ON SZCS#ANGLE_SEND=0 (0 = OFF) |
SETOK angle_send=1 SETOK angle_send=0 |
| Set APN | apn123456 xxxxxxx Where xxxxxx = APN name |
APN ok |
| Check parameters | CXZT | Status reports |
| DROP off (light sensor) | SZCS#SOS=1 (default 1 = ON) SZCS#SOS=0 (0 = OFF) |
SETOK: sos=1 SETOK:sos=0 |
| Reset (rests default settings) | begin123456 | Begin ok |
| Re-boot | CQ | CQ OK |
COMMANDS EXPLAINED
VIBRATION ALERT
This is to control alerts for the vibration sensor. Sensitivity is adjustable.
Example: The vibration sensor may detect movement of say a trailer whilst someone is attempting to attach it to a vehicle. If set to ON, you will receive a text alert. We suggest simulating this action to find the best location for the tracker. Sensitivity is adjustable
SHOCK (VIBRATION) ALERT
When armed, if the tracker detects a violent shock (vibration), it will send an alert to all authorised mobile phone numbers.
Sensitivity is factory set and is also dependent on where the tracker is mounted. We recommend attaching to a solid part of the vehicle for best detection.
MOVE ‘TOW’ ALERT
This is similar to geo-fence but is not at a fixed location – the location is where your vehicle is parked when you turn ‘move’ to ‘ON’ and set a radius.
The vehicle must be stationary for more than 3 minutes before ‘move alert’ can be turned ‘ON’. You must set a permitted radius of travel of your choice (100m-500m) from the parked location.
If the vehicle moves outside this radius (eg: towing or theft), the tracker will send an Alert to your APP and Wesbite
If move alert is on, then geo-fence is automatically off.
SPEED ALERT
Set a limit between 50~300kph. Exceeding the limit sends a text alert to authorised numbers.
TAMPER ALARM (DROP ALARM) – default OFF
The tracker has a built-in optical light sensor trigger on its base.
If the tracker is removed or falls off, it will trigger a text alert.
When setting up the tracker or testing its features you can turn off this feature
FREQUENCY OF REPORTING – default 15 seconds – max’ 300 sec’s
Set how often the tracker reports when moving. (Tracker sleeps when idle)
Typically, 15~20 seconds is used when moving as this gives a good map plot.
AUTHORISED (SOS) NUMBERS
Apart from the main ‘master’ user, you can add 2 other authorised mobile numbers that can have the same APP control and receive alerts from the tracker.
Certain control commands can only be sent by the master user.
PASSWORD – for text commands (not APP- Website logon)
The default password is 123456.
This may be changed to any 6-digit number.
Note: If changing the password, please make careful note of the new number.
ONBOARD LOCATION MEMORY – (default ON)
The tracker has an onboard location memory function and is used where there is no mobile coverage.
If you drive from a good reception area into one with no reception, the tracker will attempt to record its locations. Once mobile reception is re-acquired, the tracker will attempt to send updates the GPS website resulting in reduced loss of location data and clears onboard memory.
CORNER REPORTING (default ON)
When viewing travel history, the map trace draws a line between each 15 second plot. If the vehicle turns a corner between plots, the drawn line cuts the corner. With corner reporting turned on, the map trace will be more accurate showing the turn.
LOW BATTERY ALERT – Battery condition is shown on the mobile APP.
When battery voltage is too low,
SLEEP MODE – WAKE UP BY SHOCK OR TEXT
When the tracker detects no movement for at least 5 minutes, it will enter sleep mode to preserve battery life. GPS reception and location data upload are suspended. Mobile reception is still on. The tracker will wake up either by detecting movement from its built-in sensor or by receiving a text command message.
NOTE: If the movement sensor doesn’t receive sufficient movement, it may not immediately wake up.
TIME-ZONE
GPS time is based on GMT (Greenwich Mean Time).
When no daylight saving (10 – NSW) (12 for NZ)
With daylight saving (11 -NSW) (13 for NZ)
The tracker does not automatically update time – it must be done manually.
LED’s (Located on the tracker module) LEDs will Turn off to save power.
Green LED – Mobile communication
Unlit Mobile reception is off
Lit solid Searching for signal and/or GPRS transmission
Flashing once every 3 sec’s Working normal
Blue LED – GPS satellite reception
Unlit GPS off
Lit solid Searching
Flashing once every 3 sec’s Working normal
Red LED – Internal battery for back-up – lights when charging
BATTERY & CHARGER
Only use the charger supplied.
Charging time varies according to the battery state.
Allow 12~24 hours.
DO NOT LEAVE CHARGING UNATTENDED.
NOTE: Do not use the USB lead connected to other equipment such as a computer to charge – charging may not occur or be considerably extended.
Caution:
- This product contains a Li-ion battery which has harmful chemicals. Dispose of sensibly.
- Do not dismantle, drop, bump, puncture or treat it violently.
- Do not incinerate, get wet or submerge.
- Do not leave the battery discharged as this will prevent its recharge ability.
- This GPS tracking device uses the 4G mobile networks for sending data and texts.
- Mongoose is not responsible/liable if the mobile network becomes unavailable.
- The purchase of this product provides free access to a mobile APP and website.
These are operated by a 3rd party. Mongoose accepts no liability or responsibility if the APP or website become unavailable or access terms change.
Specification
| Mobile module | 4G Quad Band |
| Network | 4G |
| GPS sensitivity | -159dBm |
| GPS Position Accuracy | 5m (outdoors) |
| Time Accuracy | Synchronized to GPS time & GMT |
| Cold start | 35~80 sec |
| Hot start | 1 sec., average |
| Warm start | 35 sec., average |
| Charger | 110v~220v input 5v output |
| Battery – Re-chargeable Li-ion | 20,000mAh (LT604) |
| Standby (non-reporting) | Up to 6 months (LT604) |
| Daily use | Up to 60 days (LT604) |
| Operating temperature | -20°C to +55° C |
| Dimensions | 120x65x47mm 458grm (LT604) |
| Humidity | 5% to 95% Non-condensing |
| Dust / Water resistance | IP67 |
GPS Tracking System Terms of Service
Mongoose offers tracking devices and software platform for private and businesses users to locate and manage their vehicles/assets.
- These terms of service are set out to ensure that the YOU (the user) of tracking service understand your responsibilities for usage of this service, and to set out the limits of responsibility of the service provider Mongoose
- This agreement is made between YOU (the user) and Mongoose
- YOU must ensure that all information provided to Mongoose is accurate and complete and you are authorised to provide such information for use of tracking device and tracking platform including tracking account.
- YOU are responsible for keeping your tracking service details confidential and for all activity on your account including any authorised users activity.
- YOU will ensure that You, or employees or agents, will not use this tracking service, or any part of it, for any unlawful or illegal acts and will ensure it is used in accordance with any applicable Local, State, Territorial or National laws or industry standards. Mongoose does not provide legal advice, You have the responsibility to check your relevant legislation or seek suitable legal advice.
- YOU must only install and use tracking system in vehicles or asset that YOU own.
- YOU have the responsibility to disclose use of GPS tracking system to other Drivers/operators and obtain consent were necessary that Vehicle/Asses is being tracked.
- By using a Mongoose tracking device or platform YOU agree to be bound by the terms of service.
- Your tracking service may be suspended or cancelled if YOU are found to have broken these terms of service.
- Mongoose will provide technical support service during business hours via email or telephone.
You agree that Mongoose shall not be liable to YOU or any third party for the following:
- Any direct, indirect or consequential losses or damage resulting from the use of this service
- Any direct, indirect or consequential losses or damage resulting from the unavailability of this service.
- Any direct, indirect or consequential losses or damage resulting from your account being suspended or cancelled due to breach of this agreement.
Full Terms of Service for GPS tracking device and software platform also available in the GPS section @ www.mongoose.com.au
Mongoose warrants for the period of 1 YEAR (12 months) that it will make good without charge, at Mongoose’s discretion, by way of repair or replacement with the same or with a reasonable equivalent.
It is the product owner’s responsibility to return the GPS tracker for service, repair or replacement at their own cost.
Any claim made to Mongoose under this warranty must comply with the following;
(a) any defect has been notified to the supplying Mongoose dealer as soon as the defect was noticed.
(b) a copy of your retail ‘proof of purchase’ stating where and when it was purchased and (if applicable) who carried out the installation.
(c) the product was manufactured within 12 months prior to the commencement of this warranty period.
(d) the product was purchased from Mongoose or one of its authorised dealers/resellers.
(e) the product has not been disassembled or the manufacturers security seals have not been broken or tampered with.
(f) if installation of the product was required, that it has been installed by a suitably qualified industry recognised person.
(g) that the original installer, or other Mongoose dealer nominated by the original installer, has determined that the reported defect is a genuine product defect and not caused by;
- incorrect operation, incorrect installation or any other consequential damage caused by other equipment not part of this product.
- operation of the product after it is known to be defective
- tampered with, alteration or modification by any person
- the fitment and/or connection of additional parts or accessories not supplied by or approved of by Mongoose
- water damage, misuse, accident, deliberate act or abuse, misdirected electrical current, insufficient or excess voltage, ingress of any fluid or fire
- excessive heat from either the vehicle or the sun
Items not covered by this warranty;
(1) labour costs for removal & refitting of parts
(2) mobile ‘onsite’ service
(3) normal wear and tear
(4) any consequential loss incurred by the failure of this product, service or SIM card failure
(5) product purchased from internet trading sites which is not supplied by an authorised dealer
(6) Mobile SIM cards
(7) The download and use of the mobile APP and website (8) Loss of access to App and Website
THIS WARRANTY IS NOT TRANSFERABLE
OTHER MONGOOSE GPS TRACKER MODELS
VT904 – 4G VEHICLE GPS TRACKER
The Mongoose VT904 is a hard wired, feature packed 4G GPS tracker. Suitable for motorcycles, jet skis, cars, vans, Utes, trucks, campervans – in fact any vehicle with 12volts or 24volts.
Just a glance through its array of features, shown on our website, proves how versatile it can be and do almost everything most users want or need.
Australia
www.mongoose.com.au
Email: sales@mongoose.com.au
New Zealand
www.mongoose.co.nz
Email: sales@mongoose.co.nz
GPS tracking website: www.mongoosegps4g.com
Documents / Resources
 |
MONGOOSE LT604 GPS TRACKER Rechargeable Battery Powered 4G GPS Tracker [pdf] Owner's Manual LT604 GPS TRACKER Rechargeable Battery Powered 4G GPS Tracker, LT604, GPS TRACKER Rechargeable Battery Powered 4G GPS Tracker, Rechargeable Battery Powered 4G GPS Tracker, Powered 4G GPS Tracker, 4G GPS Tracker, Tracker |
 |
MONGOOSE LT604 GPS Tracker [pdf] User Guide LT604, LT604 GPS Tracker, LT604, GPS Tracker, Tracker |
