MOHAWK FlexLok Plus Tab System User Manual

MOHAWK FlexLok Plus Tab System 

PERFORMANCE

• Exceeds all performance expectations without compromise
• FlexLok+ works with all Mohawk modular products with the exception of Walk Off Tile and EcoFlex Air products

SUSTAINABILITY

• HPD and CRI Green Label Certified
• Minimal VOCs for increased indoor air quality

INSTALLATION

• Install a flexible floating floor, no glue on the subfloor
• Install on any substrate (VCT, wood, etc.)
• FlexLok+ adhesive will not dry out so installation can be installed at your own pace
• Can be installed as long as there are no visible signs of moisture

Install Methods – Tile 24×24

Quarter Turn, Monolithic, and Multi-Directional

Lay anchor rows and place a FlexLok+ tab at every joint. Install remaining carpet tiles using a step method, placing FlexLok+ tabs at each joint. Place a FlexLok+ tab at every joint around the perimeter of the room.

Install Methods – Plank 12×36

All Install Methods

Lay anchor rows and place a FlexLok+ tab at every joint. Install carpet using a step method placing a FlexLok+ tab at every corner.

Install Methods – Tile 24×24

Brick and Ashlar

Lay anchor rows and place a FlexLok+ tab at every joint. Install remaining carpet tiles, placing FlexLok+ tabs as illustrated in the diagram. Place a FlexLok+ tab at every joint around the perimeter of the room.

Install Methods – Plank 12×36

All Install Methods

Must be used in middle of length as well as four corners.

NOTE: Included above are recommended methods of installation most frequently used. Additional installation methods may be available based on product selection.