MOCUTE 060F Game Controller User Manual

060F Game Controller
User ManualMOCUTE Game Controller
Supports iOS 13.4 and above
Upgraded version of F series
Applicable model: MOCUTE-060F

MOCUTE 060F Game Controller

Thank you for purchasing this product. This is a multifunctional wireless game controller that can be used to control mobile phones, game consoles, and tablets
Tablet computers, TV boxes, smart TVs, PCs, etc.; supports Apple (iOS) system, Android System, PC (Windows) system.
Important Reminder: Product specifications are subject to change without prior notice. This product has applied for multiple patents; counterfeiting will be prosecuted
Note! Product firmware is updated regularly, please scan the QR code on the back of the controller for the latest help.

1. Power on: Press and hold the power button (for about 2 seconds) until the blue working light turns on, then turn on the controller. The default factory setting is A mode.
2. Power off: Press and hold the power button (for about 5 seconds) until the blue working light turns off, then turn off the controller.
   If no wireless device is connected within 5 minutes of powering on or if there is no operation for 30 minutes after connection, the controller willautomatically shut down.
3. Pairing Connection: After powering on, the work light flashes, and the controller enters pairing standby mode.
   Use your phone to turn on Bluetooth and search for the wireless name of the controller (A mode displays Wireless Controller, click Connection.After the connection is successful, the work light turns off. The next time you turn it on, it will automatically connect to the last paired wireless device.
4. Unpairing: In the off state – press and hold the power button for more than 8 seconds to turn on the device, and the indicator light will flash rapidly At this time, the controller generates a new Bluetooth address and enters re-pairing mode, not connecting to the previously paired device.
5. Power-on mode: In the off state, first press and hold the corresponding mode button, then simultaneously press and hold the power button to turn on At this time, the blue light will turn on, the handle will switch to the corresponding mode, canceling the previous Bluetooth pairing and re-establishing it Turn on Bluetooth search, and the Bluetooth name in the current mode will be displayed.Next time, just press the power button to turn it on automatically
   Enter the mode for the final conversion.

   Bluetooth mode	Say                                                 ‘°'””`”‘
   A : Wireless Controller (Down arrow key: APP macro definition)	i0S13.4+: Several MFi games: Genshin Impact/Cohan/Call of Duty
   	Android X Mode: Call of Duty/Contra Returns/Beitong Game Hall
   	PCXINPUT(XBox): Steam/Honkai Impact 3, etc
   B:MOCUTE-VTF-x-B	Android mapping: Honor of Kings/Genshin Impact, etc. (Not supported by MediaTek CPUs)
   	Android/iOS: Official connection for “Peace Elite”
   X :MOCUTE-VTF-x-X	i0S11-13.3 mapping mode: suitable for all games including King of Glory
   Y : MOCUTE-HIDF-x-Y	Android HID: CF/Netcom/Xiaoji Simulator/TV/Early Mobile Phones
   	PC-DINPUT: Simulator and early WINXP systems, etc
   Right arrow key: MOCUTE-PC	DC–XI NPUT: Chicken Simulator/Steam/Honkai Impact 3, etc

6. USB Wired Connection: While the device is powered off, first plug the USB data cable into the game controller and the computer interface
   After pressing and holding the corresponding mode button, then press the power button on the controller to turn it on. The controller will connect to the computer in the corresponding mode
   The default is A mode.

   USB wired mode	Explanation
   Xbox360 controller.. WIN	10: XINPUT/Steam/Xiaoji Simulator, etc
   Y: MOCUTE-GAMEPAD PC/TV/	Android: DINPUT/Simulator, etc
   R1:MOCUTE-USB-NS	Nintendo SWITCH game console dock USB connection

Official Connection of “Peace Elite”

Press the [B+Power Button] on the controller to turn it on. The [blue light on the left side of the controller] will start flashing, canceling the previous wireless pairing Peace Elite Official Connection.Enter the game, and before clicking to start the game, click on the settings menu and select [Connect to External Devices]
Just set it up, sometimes it may take a few more attempts to connect successfully.For specific usage instructions, please scan the QR code on the back of the controller. This The method is officially certified, will not result in account bans, and matches players using peripherals. Android devices can use mapping methods to match mobile players.

Android Device Operating Instructions

1. Direct Connection Mode XINPUT (A Mode Wireless Controller) (factory default)
   Press the [A+Power Button] on the controller to turn it on. The controller’s [blue light] will start flashing. Cancel the previous wireless pairing and try again Find and connect to the wireless name Wireless Controller.
   Supports direct play of some games: Some games have built-in controller drivers, allowing you to open the game and play directly.For example:
   “Contra Returns,” “Call of Duty,” “Minecraft,” “Dead Cells,” “Sky: Children of the Light,” etc.
   ■Note: Some older games and old mobile phone systems do not support this mode, such as “Chicken Simulator” and “Gohan.”
   For games like “CrossFire,” please follow the instructions below and press the Y button to turn on and connect to standard HID mode.
2. HID mode (Y mode MOCUTE-HIDxxx-Y)
   Press the [Y+Power Button] on the controller to turn it on. The controller’s [blue light] will start flashing, canceling the previous wireless pairing and re-pairing
   Find and connect to the wireless network named MOCUTE-HID-xXx-Y. Android devices will support standard game controller functions.
   Supports direct play of some games: Some games have built-in controller drivers, allowing you to open the game and play directly.For example:
   “Contra Returns,” “Minecraft,” “Dead Cells,” “CrossFire,” “Sky: Children of the Light,” etc.
   ■Supports playing games with controller tools: For example, “Beitong Game Hall,” which can be played after activation, also supports playing “Honor of Kings.”
   Popular games such as “Tomorrow and Beyond”. (Requires activation via computer or separate purchase of an activation tool)
   It can support games such as “Gohan Simulator,” “Grape Game Hall,” and “Chicken Simulator.”You can play with an emulator Simulator games: NES/SFC/GBA/N64/PS/MAME, such as “Three Kingdoms” and “Dinosaur Kombat”
   “Super Mario,” “Contra,” etc.
   Note: This mode is compatible with all Android phones, but does not support new games like “Call of Duty.”
3. Mapping Mode (B Mode MOCUTE-VTFxxx-B)
   Press the [B+Power Button] on the controller to connect to the wireless name of MOCUTE-VTF-x-B.Android devices will support MOCUTE APP key mapping customization function and button macro definition function.You can play using custom  mapping There are suitable games, such as “Honor of Kings” and “Peace Elite,” etc., and you can customize one-click combos and one-click switches Supports advanced macro definition functions.For specific usage instructions, please scan the QR code on the back of the controller.
   Note: This mode has no functionality on phones with MediaTek chips (some OPPO/Xiaomi phones, etc.) – MediaTek
   Please use the above method in A or Y mode for the mobile phone.

iOS Device Operating Instructions

1. i0 S13.4+(MFi Game A Mode Wireless Controller)
   Press the [A+Power Button] on the controller to turn it on. The controller’s [Blue Light] will start flashing, connecting to the Wireless Controller
   The wireless name, devices with iOS 13 and above will support standard game controller functions.
   Currently, there are thousands of official games that support controllers, such as: “Contra Returns,” “Call of Duty,” and “Minecraft.” “Genshin Impact,” “Slam Dunk.”
   See more games:http://apps.gamevice.com
   Simulator games: Can support playing simulator games with “Wufan Game Assistant” (only available domestically) Overseas, games from the Arcade subscription in the APP Store can be supported.
   Note: On iOS devices, go to [Settings-General-Gaming Controller] to set the buttons according to your own preferences.If it’s the first time pairing
   The post-test handle has no function; you can unpair it (ignore the device) and re-pair it once.
2. iOS11-13.3 (Mapping X mode MOCUTE-VTXx-X)
   Press the [X+Power Button] on the controller to turn it on. The controller’s [blue light] will start flashing. Cancel the previous wireless pairing and search for a new one
   The wireless name connected to MOCUTE-VTx-X.Devices running iOS 13.3 or below will support the MOCUTE-VT tool Custom key mapping function and key macro definition function.After mapping, you can play any game, such as “King of Glory.”
   “Peace Elite” and other games.You can download the MOCUTEAPP tool from the APPStore, and the specific usage instructions are as follows:
   Please scan the QR code on the back of the handle www.migamepad.com)
3. iCade Mode (Start Mode MoCUTE-x-iCade-S)
   Press the [START + Power Button] on the controller to turn it on. The controller’s [blue light] will flash, canceling the previous wireless pairing and re-pairing
   Find and connect to the wireless name of MoCUTE-x-iCade-S.iOS devices will support the use of English letters
   To play certain games, such as “InvasionStrike,” you need to set the game to iCade mode.

Instructions for connecting the controller to a PC/NS computer

1. Wired/Wireless-XINPUT (A/Right arrow key mode)
   Wired connection: With the controller turned off, first insert the USB data cable, then press the controller’s [A+ power button] to turn it on
   Wireless Connection 1: Press the [A+Power Button] to turn on the device. At this time, it is in LEXINPUT mode. Turn on the Bluetooth on your computer (this product does not
   Comes with a Bluetooth receiver. If your computer does not have Bluetooth functionality, you can purchase a Bluetooth receiver yourself and connect to the wireless network
   Wireless Controller
   Wireless Connection 2: Press [direction key right + power key] to turn on the device, connect to MOCUTE-PC-XINPUT, at this point it is
   XINPUT mode;
   All three modes support WINDOWS 10 and above (lower versions require driver installation) and can support Steam games
   As well as playing games that support controllers directly, such as <Honkai Impact 3>, the PC version of “Chicken Simulator” only recognizes wireless mode 2.
2. Wired/Wireless INPUT (Y mode)
   In wired mode, you need to plug in the USB cable first when shutting down, then press: [Y+Power Button] on the controller to turn it on. At this time, it is in DIN PUT mode Mode.Wireless mode connects to the wireless name MOCUTE-HID-x-Y.This mode can be used for some simulators, such as..
   Game assistant or older computer systems, etc.
3.  Wired SWITCH console USB2.0 dock (R1 mode)
   Insert the USB cable into the Switch console dock, press [R1 + power button] on the controller to turn it on, and you can operate the SWITCH console.

Firmware Upgrade (Firmware Update) Function Description

Android Upgrade: Press the [A+X+Power Button] on the controller to enter wireless upgrade mode, then turn it on
For the MOCUTE-FS Android app, click on the wireless name MOCUTE-FS-OTA
Enter the upgrade interface and click [Start Upgrade].Once 100% is reached, the controller will automatically shut down. Press the B+Y+power button again
Turn on the device, rotate the dual joysticks to their maximum diameter by 2 turns, then turn it off to calibrate the joysticks (Note that during the upgrade process, you must ensure that the controller has sufficient power, even if it is only partially charged.)
There is interference, try not to upgrade the charger.If the upgrade fails, repeat
Continue the operation until success is achieved.
Computer Upgrade: When upgrading using a computer, first turn off the controller and insert the USB cable
According to the instructions, press [Up Direction + Power Button] to turn on the device and enter PC upgrade mode.
Note: If the device cannot be turned on after the upgrade, please press it with a pen-like object
Just press the reset button R in the lower left corner.

Charging Instructions

This product has a built-in rechargeable lithium-ion battery. When the battery is low..
When it is too low, the [blue indicator light] will flash.At this time, insert Plug into the 5V USB port for charging! The red indicator lights up when charging
The light turns on, and the red indicator light turns off when fully charged.

Precautions and Handling of Exceptions

1. When an unexpected situation prevents the device from turning on or off, please use a small object to press the reset button R in the lower left corner.
2. If you are unable to connect, press and hold the power button for more than 8 seconds to turn on the device and cancel the previously paired connections
   Turn off the wireless name, turn off Bluetooth and then turn it on again to search for pairing.
3. If there is a delay in wireless connection, please temporarily disconnect the phone’s WIFI. Some phones have interference issues between wireless and WIFI.
   Disturbance phenomenon
4. If the controller does not function after being connected, you can cancel the pairing and re-pair it, or cancel all pairings
   Other wireless devices (such as headphones, etc.).After the controller pairing function is normal, then pair it with other headphones or devices.
5. Some Android phones cannot operate in A mode, causing button malfunctions and other issues. Please switch to Y mode for connection.
6. Some Android devices cannot use input methods after connecting a controller; please install and use the iFlytek/Baidu input method to resolve this issue.

Specifications

Project	Specrfications
Product model	MOCUTE-060F
Product Dimensions	216x90x46mm
Supports the maximum phone size	Length<185mm
Wireless protocol	Wireless 4.2 compliant
Wireless Distance	2-10M
Support system	Android iQSPC
Battery	Rechargeable lithium battery 3.7V400mA
Continuous usage time	Approximately 120 hours
Operating current	0.5-4mA

Certificate of Conformity
Inspection: M01

www.migameapd.com

Scan the QR code for more detailed help!

Many thanks for purchasing our product! This is a portable wireless gamepad, used for mobile phone, MiD, TV box, smart Tv, Pc and so on.
It is supported iOS, Android, VR,PC and so on.
Important Note: Products are subject to change without any notice.
And this product has applied for patents, counterfeiting!

I StartupS Shutdown and mode description

Startup Press and hold the power button (about 2 seconds) until the blue work light is on, and now the handle is turned on. Factory default a mode
Shutdown Press and hold the power button (about 5 seconds) until the blue work light is off and now the handle is turned off.
If the wireless device is not connected for 5 minutes after power on or no operation for 30 minutes after connection, the handle will turn of automatically.
Pair and connect After powering on, the work light flashes, and the handle enters the Wireless pairing mode.
Use the device to find the wireless name of the handle and click to connect. After the connection is succeeded, the work light will flash slowly. When you boot it for the next time, it will connect to the last paired wireless device automatically.
Rematch mode: In the off state, press and hold the Power button for more than 8 seconds to boot, and the work LED will flash, and then the handle will enter the rematch mode and will not connect to the last paired device.
Change mode:In the power of state, press and hold the mode key first, and then press the power key./.The LED is on, and the handle will switch to the corresponding mode.Cancel and search n again, the current mode wireless name will be displayed. The next time you press the power button directly to start up, it will automatically enter the last conversion mode.

UB cable connection: In the shutdown state,insert the UsB cable into the game handle and computer, press and hold the corresponding mode key, and then press the power key. The handle will be connected to the computer according to the corresponding  mode. The default is modeA.

Android device operating instructions

XInput(mode-A:Wireless Controller) (Factory Default)
Press A+Power key on the handle, The handle [blue LED on the left] will flash,
cancel previous wireless pairing,find again, connected to Wireless Controller.This mode has the function of combo with M key and other keys.
T Support direct play of some games: Some games have built-in handle drivers, which
can be opened directly to play.Such as:Minecraft GTA< Call Of Duty etc.
More games refer the web:http://apps.gamevice.com/google.
Note: Some old games and old mobile phone systems do not support this mode, such as chicken simulator, Crossing Fire, etc.Please refer to the following instructions.PressY +Power startup and connect to the standard HiD mode.
Mapping mode (mode-B:Mocute-VtFx-B)
Press B+Power key on the handle,The handle [blue LED on the left] will flash, Cancel previous wireless pairing, find again, connected to MoCUTE-VTFxxx-B.Android devices will support MocUTE-VT tool button mapping and macro definition  function.Use custom mapping to play all suitable games, such as “PuBG”,”Fortnite” etc., as well as customizable one-click combos and other advanced macro definition functions.
For more instructions, please scan the QR code on the back of the handle.
Note: This mode has no function on mobile phones with MediaTek CPU (some OPPO Xiaomi and other mobile phones).Please refer method 1/2 for MTK phones.

HID mode(mode-Y:MoCUTE-HIDxxx-Y) (General)
Press Y+Power key on the handle, The handle [blue LED on the left] will flash, cancel previous wireless pairing,find again, connected to Mocute-HiDxxx-Y. Support direct play of some games:, Some games have built-in handle drivers, which can be opened directly to play.Such as:Minecraft GTA Cross Fire etc. More games refer the web:http://apps.gamevice.com/google.
Support to play games with handle tools: Use to play popular games such as, (Can’t play “PuBG”, may be suspended)
■ Can support “Chick Simulator” and Other standard game centers, etc.You can play simulator games with the simulator: N NES/SFC/GBA/N64/PS/MAME…, Such as “Three Kingdoms” and “Dinosaurs” “Super Mario” “Contra”
Note: this mode is compatible with all Android phones, but does not support new games such as

ios device operating instructions

1. iOS13.4+ (MFi Games Mode-A: Wireless Controller)
   Press A+Power key on the handle, and the handle [blue LED on the left] will flash, Connect to Wireless Controller, Devices above iOS version 13 will support standard gamepad functions, Some official games (MFi Games) support standard  controllers.
   Such as: Minecraft Asphalt Call Of Duty …..,This website has some games: http://apps.gamevice.com.This mode has the function of combo with M key and otherkesuppotg games in Arcade subscription in App Store .In the iOS device menu [Settings- General-Gamepad], press the button to set your own preferences.
   NOTE:If the test handle has no function after the initial pairing,you can cancel the pairing (ignore the device) and repair it.
2. ios11-13.3 (Mapping mode-X: MocuTe-Vtxx-X)
   Press X + Power key on the handle, The handle[blue LED on the left] will flash, Cancel previous wireless pairing, Find again, connected to MocUTE-VTFxx-X, ios devices will support MoCuTE-VT tool button mapping Custom function and button
   macro definition function.After mapping, you can play any game, such as “PUBG”and “Fortnite” etc.This function does not support lOs13.4 or above.
   MOCUTE APP tool can be downloaded from APPStore,For specific instructions, please scan the QR code on the back of the handle (www.migamepad.com).
3. Cade Mode(Mode-Start:MocUTE-x-iCade-S)
   Press the [Start+ Power key] on the handle to start up, and the [blue LED] on the handle will flash, cancel the previous wireless pairing, and re find and connect to the wireless name of MoUTE-x-iCade-S.iOS devices will support playing individual games in English letters, such as.iCade mode needs to be set in the game.

Connection instructions.ft handloom PC NS

1. USB/Wireless -Xinput (mode-A/Direction key right)
   USB mode: turn off the handle and insert the USB cable, then press [A + Power key] to start up. Wireless mode 1: press [A + Power key] to start up.At this time, it is le XInput mode. Turn on Bluetooth on the computer (this product does not have a Bluetoothreceiver. If your computer does not have a Bluetooth receiver, you can buy a Bluetooth receiver yourself) and connect to the Wireless Controller.This mode hasthe function of combo with M key and other keys. Wireless mode e 2: press [Right direction nkey + Power key] to startup and connect MOCUTE-PC-XINPUT.At this time, it is in XInput mode. These 3 modes all support Windows 10 or above (drivers need to be installed for lower versions), and can support Steam games and playand other games that support handles.Chicken simulator can only use wireless mode 2.
2. USB /Wireless – Input (mode-Y)
   In USB mode, insert the USB cable first when shutting down, and press [Y + Power key] on the handle to start up.At this time, it is DInput mode. The wireless mode connection name is Mocute-HiD-x-Y.This mode can be used for some simulators, game  assistants or older computer systems.
3. USB Switch host USB2.0 base(mode-R1)
   Insert the USB cable into the switch host base, then press [R1 + Power key] on the handle to start the switch host.

Firmware upgrade function description

Android upgrade: press the [A + X + Power] button on the handle to enter the wireless upgrade mode. For the Android application of MOCUTE-FS, click the wireless name MoCuTe-FS-OТА, enter the upgrade interface and click Start upgrade].After 100%, the handle will automatically shut down, and press Con Ha! the B + Y + Power key to turn on, turn the double joys tic at the maximum diameter for 2 turns, and then turn off the joypad to calibrate the joystick. (note that the handle must be fully charged and partially charged during the upgrade processes.Some e chargers have interference, Do not upgrade when charging. If the upgrade fails, repeat operate until successful.
PCu upgrade: turn off the handle and insert the USB cable. And press [Direction UP + Power] to startup and enter the Pc upgrade mode.
Note: if you can’t power on after upgrading, please press the reset key R.
Notes
(1) If it can’t be turned on outturned off due to unforeseen circumstances, please press the R button (reset button)..
(2) If there is no air connection to the handle, you can disassemble it, repair it, and reassemble it. or cancel pairing all other wireless devices (such as headphones, etc.).
(3) If Wireless is delayed and so on,please temporarily disconnect the mobile phone Wifl.

Charge description

This product has a built-in rechargeable lithium-ion battery.When the battery is too low, the e[blue indicator LeD on the left] will flash.Now plug in the 5VUSB port for charging! The red indicator light t on when charging, and the red indicator light off  when it is fully charged.

Product Specification

www.migamepad.com
Scan the QR code to get more details help!