A Whitepaper Giving a
High-Level Overview of Audio
Options on Raspberry Pi SBCs
Raspberry Pi Ltd
Колофон
© 2022-2025 Raspberry Pi Ltd
This documentation is licensed under a Creative Commons Attribution-No Derivatives 4.0 International (CC BY-ND).
1.0 хувилбар
Build date: 28/05/2025
Хуулийн хариуцлагаас татгалзах мэдэгдэл
Үе үе өөрчилсөн ("НӨӨЦ") БӨӨӨРӨЛИЙН PI БҮТЭЭГДЭХҮҮНИЙ ТЕХНИКИЙН БОЛОН НАЙДВАРТАЙ БАЙДЛЫН МЭДЭЭЛЭЛИЙГ ("НӨӨЦ") "БӨӨЛӨГДӨЛ PI" ХХК-иас "Байгаа байдлаар" ӨГӨГДСӨН. ED ХУДАЛДААНЫ БОЛОМЖТОЙ БОЛОН ТУСГАЙ ЗОРИУЛАЛТАНД ТОХИРЧ БАЙГАА ЗОРИУЛСАН БАТАЛГААС ТОГТООГДСОН. ХОЛБОО БАРИХ ХУУЛИАР ЗӨВШӨӨРӨГДСӨН ДЭЭД ХЭМЖЭЭНД ШУУД, ШУУ БУС, ГАЗАРГҮЙ, ТУСГАЙ, ҮЛГЭРҮҮЛЭГЧ, УЛАМ ХЭРЭГЛЭЭГЭЭР ХАРИУЦЛАГА ХАРИУЦАХГҮЙ. ЭСВЭЛ ҮЙЛЧИЛГЭЭ; АШИГЛАЛТ, ӨГӨГДӨЛ алдагдах , ЭСВЭЛ АШИГ, ЭСВЭЛ Бизнесийн тасалдал) ГЭДЭГ ҮҮСГЭЭД БАЙСАН БОЛОН ХАРИУЦЛАГА ТУХАЙ ОНОЛЫН дагуу, ГЭРЭЭНЭЭР ХАТУУ ХАРИУЦЛАГА, ЭСВЭЛ ЗОРИУЛАЛТ (ХАЯМБАР ЭСВЭЛ БУСАД ЗОРИУЛАЛТААС) БОЛОМЖИЙГ ЗӨВЛӨЖ БАЙНА ИЙМ ХОХИРОЛТОЙ.
RPL нь ямар ч үед, нэмэлт мэдэгдэлгүйгээр НӨӨЦӨЛТ болон тэдгээрт тодорхойлсон бүтээгдэхүүнд нэмэлт, сайжруулалт, залруулга болон бусад өөрчлөлт оруулах эрхтэй.
The RESOURCES are intended for skilled users with suitable levels of design knowledge. Users are solely responsible for their selection and use of the RESOURCES and any application of the products described in them. User agrees to indemnify and hold RPL harmless against all liabilities, costs, damages or other losses arising out of their use of the RESOURCES. RPL grants users permission to use the RESOURCES solely in conjunction with the Raspberry Pi products. All other use of the RESOURCES is prohibited. No licence is granted to any other RPL or other third party intellectual property right.
HIGH RISK ACTIVITIES. Raspberry Pi products are not designed, manufactured or intended for use in hazardous environments requiring fail safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, weapons systems or safety-critical applications (including life support systems and other medical devices), in which the failure of the products could lead directly to death, personal injury or severe physical or environmental damage (“High Risk Activities”). RPL specifically disclaims any express or implied warranty of fitness for High Risk Activities and accepts no liability for use or inclusions of Raspberry Pi products in High Risk Activities. Raspberry Pi products are provided subject to RPL’s Стандарт нөхцөл. RPL’s provision of the RESOURCES does not expand or otherwise modify RPL’s Стандарт нөхцөл үүнд илэрхийлсэн татгалзал, баталгааг багтаасан боловч үүгээр хязгаарлагдахгүй.
Баримт бичгийн хувилбарын түүх
| Суллах | Огноо | Тодорхойлолт |
| 1 | 1-25-XNUMX | Анхны хувилбар |
Баримт бичгийн хамрах хүрээ
Энэхүү баримт бичиг нь дараах Raspberry Pi бүтээгдэхүүнүүдэд хамаарна:
| PI 0 | PI 1 | Pi 2 | Pi 3 | Pi 4 | Pi 400 | Pi 5 | Pi 500 | CM1 | CM3 | CM4 | CM5 | Пико | Пико2 | ||||
| 0 | W | H | A | B | A | B | B | Бүгд | Бүгд | Бүгд | Бүгд | Бүгд | Бүгд | Бүгд | Бүгд | Бүгд | Бүгд |
| ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||
Танилцуулга
Over the years, the options available for audio output on Raspberry Pi SBCs (single-board computers) have become more numerous, and the way they are driven from software has changed.
This document will go through many of the available options for audio output on your Raspberry Pi device and provide instructions on how to use audio options from the desktop and the command line.
This whitepaper assumes that the Raspberry Pi device is running Raspberry Pi OS and is fully up to date with the latest firmware and kernels.
Raspberry Pi аудио техник хангамж
HDMI
All Raspberry Pi SBCs have an HDMI connector that supports HDMI audio. Connecting your Raspberry Pi SBC to a monitor or television with speakers will automatically enable HDMI audio output through those speakers. HDMI audio is a high-quality digital signal, so the results can be very good, and multichannel audio like DTS is supported.
If you are using HDMI video but want the audio signal to split off — for example, to an amplifier that does not support HDMI input — then you will need to use an additional piece of hardware called a splitter to extract the audio signal from the HDMI signal. This can be expensive, but there are other options, and these are described below.
Аналог PCM/3.5 мм үүр
Raspberry Pi загварууд B+, 2, 3, 4 нь аудио болон нийлмэл видео дохиог дэмждэг 4 туйлтай 3.5 мм аудио залгууртай. Энэ нь PCM (импульсийн кодын модуляц) дохионоос үүссэн чанар муутай аналог гаралт боловч чихэвч болон ширээний чанга яригчдад тохиромжтой хэвээр байна.
ЖИЧ
There is no analogue audio output on Raspberry Pi 5.
Докны залгуурын дохиог кабелийн төгсгөлөөс эхлээд үзүүр хүртэл нь дараах хүснэгтэд тодорхойлсон. Кабель нь өөр өөр үүрэг даалгавартай байдаг тул та зөвийг нь шалгаарай.
| Jack segment | Дохио |
| Ханцуй | Видео |
| Бөгж 2 | Газар |
| Бөгж 1 | Зөв |
| Зөвлөгөө | Зүүн |
I2S дээр суурилсан адаптерийн хавтангууд
All models of Raspberry Pi SBCs have an I2S peripheral available on the GPIO header. I2S is an electrical serial bus interface standard used to connect digital audio devices and communicate PCM audio data between peripherals in an electronic device. Raspberry Pi Ltd manufactures a range of audio boards that connect to the GPIO header and use the I2S interface to transfer audio data from the SoC (system on a chip) to the add-on board.
Жич: Add-on boards that connect via the GPIO header and adhere to the appropriate specifications are known as HATs (Hardware Attached on Top). Their specifications can be found here: https://datasheets.raspberrypi.com/
The full range of audio HATs can be seen on the Raspberry Pi Ltd webсайт: https://www.raspberrypi.com/products/
There are also a large number of third-party HATs available for audio output, for example Pimoroni, HiFiBerry, Adafruit гэх мэт, эдгээр нь олон янзын функцийг хангадаг.
USB аудио
If it is not possible to install a HAT, or you are looking for a quick and easy way to attach a jack plug for a headphone output or a microphone input, then a USB audio adapter is a good choice. These are simple, cheap devices that plug into one of the USB-A ports on the Raspberry Pi SBC.
Raspberry Pi OS includes drivers for USB audio by default; as soon as a device is plugged in, it should show up on the device menu that appears when the speaker icon on the taskbar is right-clicked.
The system will also automatically detect if the attached USB device has a microphone input and enable the appropriate support.
Bluetooth
Bluetooth audio refers to the wireless transmission of sound data via Bluetooth technology, which is very widely used. It enables the Raspberry Pi SBC to talk to Bluetooth speakers and headphones/earbuds, or any other audio device with Bluetooth support. The range is fairly short — about 10 m maximum.
Bluetooth devices need to be ‘paired’ with the Raspberry Pi SBC and will appear in the audio settings on the desktop once this is done. Bluetooth is installed by default on Raspberry Pi OS, with the Bluetooth logo appearing on the desktop taskbar on any devices that have Bluetooth hardware installed (either built in or via a Bluetooth USB dongle). When Bluetooth is enabled, the icon will be blue; when it is disabled, the icon will be grey.
Програм хангамжийн дэмжлэг
The underlying audio support software has changed considerably in the full Raspberry Pi OS image, and, for the end user, these changes are mostly transparent. The original sound subsystem used was ALSA. Pulse Audio succeeded ALSA, before being replaced by the current system, which is called Pipe Wire. This system has the same functionality as Pulse Audio, and a compatible API, but it also has extensions to handle video and other features, making the integration of video and audio much easier. Because Pipe Wire uses the same API as Pulse Audio, Pulse Audio utilities work fine on a Pipe Wire system.
These utilities are used in the exampдоор байна.
To keep the image size down, Raspberry Pi OS Lite still uses ALSA to provide audio support and does not include any Pipe Wire, Pulse Audio, or Bluetooth audio libraries. However, it is possible to install the appropriate libraries to add those features as required, and this process is also described below.
Ширээний компьютер
Дээр дурдсанчлан аудио ажиллагааг ширээний ажлын самбар дээрх чанга яригчийн дүрсээр гүйцэтгэдэг. Дүрс дээр хулганы зүүн товшилтоор дууны түвшний гулсагч болон дууг хаах товчлуур гарч ирдэг бол баруун товшилт нь боломжтой аудио төхөөрөмжүүдийн жагсаалтыг гаргаж ирнэ. Зүгээр л ашиглахыг хүссэн аудио төхөөрөмж дээрээ дарна уу. Мөн хулганы баруун товчийг дарж, мэргэжлийн програмыг өөрчлөх сонголт байдагfileтөхөөрөмж бүр ашигладаг. Эдгээр мэргэжлийнfiles usually provide different quality levels.
If microphone support is enabled, a microphone icon will appear on the menu; right-clicking on this will bring up microphone specific menu options, such as input device selection, whilst left-clicking brings up input level settings.
Bluetooth
To pair a Bluetooth device, left-click on the Bluetooth icon on the taskbar, then select ‘Add Device’. The system will then start looking for available devices, which will need to be put into ‘Discover’ mode to be seen. Click on the device when it appears in the list and the devices should then pair. Once paired, the audio device will appear in the menu, which is selected by clicking the speaker icon on the taskbar.
Тушаалын мөр
Because Pipe Wire uses the same API as Pulse Audio, the majority of the Pulse Audio commands used to control audio work on Pipe Wire. pacts is the standard way of controlling Pulse Audio: type man pactl into the command line for more details.
Prerequisites for Raspberry Pi OS Lite
On a full installation of Raspberry Pi OS, all the required command line applications and libraries are already installed. On the Lite version, however, Pipe Wire is not installed by default and must be manually installed to be able to play back sound.
To install the required libraries for Pipe Wire on Raspberry Pi OS Lite, please input the following: sudo apt install pipewire pipewire-pulse pipewire-audio pulseaudio-utils If you intend on running applications that use ALSA, you will also need to install the following: sudo apt install pipewire-alsa
Rebooting after installation is the easiest way to get everything up and running.
Audio playback examples
Display a list of installed Pulse audio modules in short form (the long form contains a lot of information and is difficult to read): $ pactl list modules short Display a list of Pulse Audio sinks in short form:
$ pactl жагсаалт богино хугацаанд живдэг
On a Raspberry Pi 5 connected to an HDMI monitor with built-in audio and an additional USB sound card, this command gives the following output: $ pactl list sinks short
179 alsa_output.platform-107c701400.hdmi.hdmi-stereo Pipe Wire s32le 2ch 48000Hz SUSPENDED 265 alsa_output.usb-C-Media_Electronics_Inc._USB_PnP_Sound_Device-00.analog-stereo-output Pipe Wire s16le 2ch 48000Hz SUSPENDED
ЖИЧ
Raspberry Pi 5 does not have analogue out.
For a Raspberry Pi OS Lite install on a Raspberry Pi 4 — which has HDMI and analogue out — the following is returned: $ pactl list sinks short
69 alsa_output.platform-bcm2835_audio.stereo-fallback Pipe Wire s16le 2ch 48000Hz SUSPENDED
70 alsa_output.platform-107c701400.hdmi.hdmi-stereo Pipe Wire s32le 2ch 48000Hz SUSPENDED
Raspberry Pi OS Lite-ийн энэ суулгац дээр анхдагч угаалтуурыг HDMI аудио болгон харуулах, өөрчлөхийн тулд (энэ нь аль хэдийн анхдагч байж магадгүй гэдгийг анхаарна уу) дараахыг бичнэ үү:
$ pactl get-default-sink
alsa_output.platform-bcm2835_audio.stereo-fallback
$ pactl set-default-sink 70
$ pactl get-default-sink
alsa_output.platform-107c701400.hdmi.hdmi-stereo
Дахин тоглуулахын тулдample, үүнийг эхлээд s-д байршуулах хэрэгтэйample кэш, энэ тохиолдолд анхдагч угаалтуур дээр. Та угаалтуурыг pactl play-s-ийн төгсгөлд нэрийг нь нэмж өөрчилж болноample тушаал:
$ pactl байршуулахampийн sample.mp3 sampнэр
$ pactl play-sampийн sampнэр
There is a Pulse Audio command that is even easier to use to play back audio:
$ paplay sample.mp3
pactl has an option to set the volume for the playback. Because the desktop uses Pulse Audio utilities to get and set audio information, the execution of these command line changes will also be reflected in the volume slider on the desktop.
Энэ эксample дууны хэмжээг 10% бууруулдаг:
$ pactl set-sink-volume @DEFAULT_SINK@ -10%
Энэ эксample дууны хэмжээг 50% болгож тохируулна:
$ pactl set-sink-volume @DEFAULT_SINK@ 50%
There are many, many Pulse Audio commands that are not mentioned here. The Pulse Audio webсайт (https://www.freedesktop.org/wiki/Software/PulseAudio/) and the man pages for each command offer extensive information about the system.
Bluetooth
Controlling Bluetooth from the command line can be a complicated process. When using Raspberry Pi OS Lite, the appropriate commands are already installed. The most useful command is bluetoothctl, and some examples of it in use are provided below.
Make the device discoverable to other devices:
$ bluetoothctl-г илрүүлэх боломжтой
Төхөөрөмжийг бусад төхөөрөмжтэй хослуулах боломжтой болгох:
$ bluetoothctl хослох боломжтой
Хүрээнд байгаа Bluetooth төхөөрөмжүүдийг хайх:
$ bluetoothctl хайлт асаалттай
Скан хийхийг унтраах:
$ bluetoothctl scan off bluetoothctl also has an interactive mode, which is invoked by using the command with no parameters. The following example runs the interactive mode, where the list command is entered and the results shown, on a Raspberry Pi 4 running Raspberry Pi OS Lite Bookworm: $ bluetoothctl
Агент бүртгэгдсэн
[bluetooth]# list
Controller D8:3A:DD:3B:00:00 Pi4Lite [default] [bluetooth]#
You can now type commands into the interpreter and they will be executed. A typical process for pairing with, and then connecting to, a device may read as follows: $ bluetoothctl
Agent registered [bluetooth]# discoverable on
Илрэх боломжтой өөрчлөлтийг амжилттай хийлээ
[CHG] Controller D8:3A:DD:3B:00:00 Discoverable on [bluetooth]# pairable on
Хослолыг амжилттай сольсон
[CHG] Controller D8:3A:DD:3B:00:00 Pairable on [bluetooth]# scan on
< ойр орчмын төхөөрөмжүүдийн урт жагсаалт байж болно >
[bluetooth]# pair [mac address of device, from the scan command or from the device itself, in the form xx:xx:xx:xx:xx:xx]
[bluetooth]# scan off
[bluetooth]# connect [same mac address]
The Bluetooth device should now appear in the list of sinks, as shown in this exampRaspberry Pi OS Lite суулгацаас:
$ pactl жагсаалт богино хугацаанд живдэг
69 alsa_output.platform-bcm2835_audio.stereo-fallback Pipe Wire s16le 2ch 48000Hz SUSPENDED
70 alsa_output.platform-107c701400.hdmi.hdmi-stereo Pipe Wire s32le 2ch 48000Hz SUSPENDED
71 bluez_output.CA_3A_B2_CA_7C_55.1 Pipe Wire s32le 2ch 48000Hz SUSPENDED
$ pactl set-default-sink 71
$ paplay <example_audio_file>
Та одоо үүнийг өгөгдмөл болгож, дээр нь аудио тоглуулах боломжтой.
Дүгнэлт
Raspberry Pi Ltd-ийн төхөөрөмжүүдээс аудио гаралт гаргах хэд хэдэн янзын арга байдаг бөгөөд энэ нь хэрэглэгчийн шаардлагын дийлэнх хувийг хангадаг. Энэхүү танилцуулгад эдгээр механизмуудыг тоймлон харуулсан бөгөөд тэдгээрийн олонхын талаар мэдээлэл өгсөн. Энд танилцуулсан зөвлөгөө нь эцсийн хэрэглэгчдэд төслийнхөө зөв аудио гаралтын схемийг сонгоход тусална гэж найдаж байна. Энгийн жишээampАудио системийг хэрхэн ашиглах талаар дэлгэрэнгүй мэдээлэл өгсөн боловч уншигч аудио болон Bluetooth командын гарын авлага, зааварчилгаанаас илүү дэлгэрэнгүй мэдээлэл авах хэрэгтэй.
Raspberry Pi бол Raspberry Pi Ltd-ийн худалдааны тэмдэг юм
Raspberry Pi Ltd
Баримт бичиг / нөөц
 |
Raspberry Pi SBCS нэг самбарт компьютер [pdf] Хэрэглэгчийн гарын авлага SBCS Single Board Computer, SBCS, Single Board Computer, Board Computer, Computer |