1. Танилцуулга
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VEVOR Airbrush Kit TC-20. Please read these instructions thoroughly before initial use to ensure proper functionality and longevity of the product.
The VEVOR Airbrush Kit TC-20 is a versatile tool designed for precision atomization, suitable for a wide range of applications including cake decorating, model painting, nail art, and canvas painting. It features a 1/6 HP air compressor, three dual-action airbrushes with varying nozzle sizes, and a comprehensive cleaning kit.
Зураг 1.1: Дууслааview of the VEVOR Airbrush Kit components, highlighting precision atomization with 0.3mm and 0.8mm nozzles.
Зураг 1.2: Жишээ ньamples of diverse projects achievable with the airbrush kit, such as cake decoration, model painting, and nail art.
2. Аюулгүй ажиллагааны заавар
Тоног төхөөрөмжид гэмтэл учруулах, эвдрэл гарахаас урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын удирдамжийг үргэлж дагаж мөрдөөрэй.
- Агааржуулалт: Use the airbrush in a well-ventilated area to avoid inhaling paint fumes. Consider using a spray booth or respirator.
- Нүд хамгаалах: Always wear safety glasses or goggles to protect your eyes from paint spray.
- Арьс хамгаалах: Wear gloves to prevent skin contact with paints and cleaning solutions.
- Шатамхай материал: Do not use flammable paints or solvents near open flames, sparks, or heat sources. Ensure the work area is free from ignition sources.
- Цахилгааны аюулгүй байдал: Ensure the compressor is connected to a grounded outlet. Do not operate with wet hands or in damp conditions. Disconnect power before cleaning or servicing.
- Хүүхэд ба тэжээвэр амьтад: Keep the airbrush kit out of reach of children and pets.
- Даралт тайлах: Always release air pressure from the system before disconnecting the airbrush or hose.
- Зөв хэрэглээ: Use the equipment only for its intended purpose. Do not modify the compressor or airbrushes.
3. Багцын агуулга
Доор жагсаасан бүх зүйл таны багцад байгаа эсэхийг шалгаарай.
- 1 x 1/6 HP Air Compressor
- 3 x Dual-Action Professional Airbrushes (with 0.3 mm, 0.3 mm, and 0.8 mm nozzles)
- 1 x Агаарын хоолой
- 6 x Acrylic Paints
- 1 x Airbrush эзэмшигч
- 1 x Cleaning Kit (Mini Cleaning Brushes)
- 1 x тэжээлийн адаптер (AC)
Image 3.1: Visual representation of the air compressor dimensions and the complete set of accessories included in the kit.
4. Тохиргоо
- Бүрэлдэхүүн хэсгүүдийг задлах: Сав баглаа боодолоос бүх зүйлийг болгоомжтой авч, ямар нэгэн эвдрэл гарсан эсэхийг шалгана уу.
- Position Compressor: Place the air compressor on a stable, level surface in a well-ventilated area. Ensure the cooling fans are not obstructed.
- Attach Airbrush Holder: Secure the airbrush holder to the compressor if desired, following the provided instructions.
- Агаарын хоолойг холбох: Connect one end of the air hose to the air outlet on the compressor and the other end to the air inlet of your chosen airbrush. Ensure connections are secure to prevent air leaks.
- Эрчим хүчний холболт: Plug the power adapter into the compressor and then into a standard 120V, 60Hz grounded electrical outlet.
- Анхны туршилт: Turn on the compressor. It should start and build pressure. Check for any unusual noises or leaks.
5. Ашиглалтын заавар
The VEVOR Airbrush Kit features dual-action airbrushes, allowing independent control of air and paint flow for precise results.
- Будаг бэлтгэх: Thin your acrylic paints to the correct consistency for airbrushing. The consistency should be similar to milk. Test on a scrap surface before applying to your project.
- Fill Paint Cup: Carefully pour the prepared paint into the airbrush's paint cup. Do not overfill.
- Агаарын даралтыг тохируулах: Turn on the compressor. Use the adjustable pressure knob on the compressor to set the desired air pressure, typically between 15-50 PSI depending on the paint and desired effect.
- Basic Spraying:
- Агаарын урсгал: Press down on the airbrush trigger to release air.
- Paint Flow: While holding the trigger down, pull it back to release paint. The further back you pull, the more paint will be released.
- Хяналт: Practice coordinating the push-down (air) and pull-back (paint) actions to achieve smooth, consistent lines and coverage.
- Тасралтгүй ажиллагаа: The compressor is equipped with dual cooling fans, allowing for 20+ minutes of continuous use without overheating.
Image 5.1: Demonstrates the easy control features of the airbrush, including the twist knob for air pressure adjustment and the push lever for precise spray.
Image 5.2: The air compressor's dual cooling fans ensure continuous operation without overheating, providing consistent airflow of 23-25 L/min.
6. Засвар үйлчилгээ
Regular cleaning and maintenance are crucial for optimal performance and to prevent clogging.
- Immediate Cleaning After Use:
- Үлдсэн будгийг аяганаас зайлуулна.
- Add a small amount of appropriate cleaning solution (water for acrylics, solvent for other paints) to the cup.
- Spray the cleaning solution through the airbrush until it runs clear.
- Use the included mini cleaning brushes to thoroughly clean the paint cup and nozzle area.
- Гүн цэвэрлэгээ: Periodically disassemble the airbrush components (needle, nozzle, cap) for a more thorough cleaning. Refer to the airbrush's specific instructions for disassembly and reassembly.
- Бөглөрөхөөс урьдчилан сэргийлэх: Always clean the airbrush immediately after each use. Never let paint dry inside the airbrush.
- Компрессорын засвар үйлчилгээ: Keep the compressor clean and free of dust. Ensure the air intake and fan vents are unobstructed.
Image 6.1: The airbrush features a smooth inner chamber to prevent clogging, and a set of five mini cleaning brushes is included for effortless maintenance.
7. Алдаа засах
Нийтлэг асуудлууд болон тэдгээрийн шийдлүүдийг доорх хүснэгтээс харна уу.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Будгийн урсгал байхгүй | Clogged nozzle, dried paint, bent needle, paint too thick | Clean nozzle, thin paint, straighten/replace needle |
| Тэгш бус шүрших загвар | Damaged nozzle, dirty air cap, inconsistent paint consistency | Inspect/replace nozzle, clean air cap, adjust paint thinning |
| Air bubbles in paint cup | Loose nozzle, damaged nozzle, dirty airbrush head | Tighten nozzle, replace nozzle, clean airbrush thoroughly |
| Компрессор асахгүй байна | No power, faulty switch, overheating | Check power connection, inspect switch, allow to cool down |
| Агаарын даралт бага | Air leak, pressure regulator setting, compressor issue | Check hose connections, adjust regulator, contact support if compressor fails |
8. Техникийн үзүүлэлтүүд
| Онцлог | Тодорхойлолт |
|---|---|
| Загварын дугаар | ТС-20 |
| Брэнд | VEVOR |
| Эрчим хүчний эх үүсвэр | AC |
| Үнэлгээ | 120В, 60Гц |
| Хүч | 1/6 HP / 120 Вт |
| Агаарын урсгал | 23-25 л/мин |
| Хамгийн их даралт | 25 PSI (Инч квадрат тутамд фунт) |
| Nozzle Dimensions | 0.3 мм, 0.3 мм, 0.8 мм |
| Airbrush Cup Volume | 2 mL, 9 mL, 22 mL (depending on airbrush) |
| Бүтээгдэхүүний хэмжээс | 10.83"W x 8.11"H |
| Зүйлийн жин | 10.6 фунт |
| Материал | Хуванцар |
| Өнгө | Хар |
9. Баталгаат хугацаа ба дэмжлэг
VEVOR бүтээгдэхүүнүүд нь удаан эдэлгээ, гүйцэтгэлд зориулагдсан. Баталгаат байдлын талаар дэлгэрэнгүй мэдээлэл авахыг хүсвэл бүтээгдэхүүндээ хавсаргасан баталгаат картаас эсвэл албан ёсны VEVOR-д зочилно уу webсайт. Худалдан авалтын баримтаа баталгаат нэхэмжлэлд зориулж худалдан авалтын баталгаа болгон хадгална уу.
If you encounter any issues or have questions regarding your VEVOR Airbrush Kit TC-20 that are not covered in this manual, please contact VEVOR customer support for assistance. Contact information can typically be found on the product packaging or the official VEVOR webсайт.