VEVOR Electric Crepe Maker HT-2E Instruction Manual

1. Аюулгүй ажиллагааны чухал заавар

Аюулгүй, үр ашигтай ажиллуулахын тулд энэ төхөөрөмжийг ашиглахаасаа өмнө бүх зааврыг анхааралтай уншина уу. Цаашид лавлах зорилгоор энэхүү гарын авлагыг хадгална уу.

• Цахилгааны аюулгүй байдал: Цахилгаан хангамж нь ботьтой таарч байгаа эсэхийг шалгаарайtage specified on the appliance. Do not operate with a damaged cord or plug. Keep the appliance away from water or other liquids to prevent electric shock.
• Дулааны аюулгүй байдал: The cooking plates become extremely hot during operation. Use caution and avoid direct contact with hot surfaces. Always use heat-resistant gloves or utensils. Allow the appliance to cool completely before cleaning or storing.
• Байршил: Place the crepe maker on a stable, heat-resistant, and level surface. Ensure adequate ventilation around the appliance. Do not place near flammable materials.
• Хүүхэд ба хяналт: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.
• Цэвэрлэгээ: Disconnect from power supply before cleaning. Do not immerse the appliance in water. Refer to the cleaning section for proper maintenance.

2. Бүтээгдэхүүн дууссанview

The VEVOR HT-2E Electric Crepe Maker is a commercial-grade appliance designed for efficient crepe and pancake preparation. It features two independent heating plates and controls for versatile cooking.

Figure 2.1: VEVOR Electric Crepe Maker (Model HT-2E)

Бүрэлдэхүүн хэсгүүд:

• Dual Heating Plates: Two 16-inch (400mm) non-stick cooking surfaces.
• Independent Temperature Controls: Separate knobs for each plate, allowing temperature adjustment from 122°F to 572°F (50°C to 300°C).
• Эрчим хүчний үзүүлэлтүүд: Lights to show when the unit is powered on.
• Heat Indicators: Lights to show when the heating elements are active and when the set temperature is reached.
• Зэвэрдэггүй ган их бие: Durable and easy-to-clean housing.
• Дуслын тавиур: Removable tray to collect overflow and facilitate cleaning.

Figure 2.2: Thoughtful Design Features

The design includes features such as a sturdy stainless steel body, overflow channels to manage batter spills, and a compact form factor for countertop use.

3. Техникийн үзүүлэлтүүд

Зураг 3.1: Бүтээгдэхүүний хэмжээс ба дагалдах хэрэгслүүд

Included components: 1 x Electric Crepe Maker, various accessories (brushes, food clips, whisk, plastic scraper, wooden spreaders, sponges).

4. Тохиргоо ба анхны хэрэглээ

4.1 Савлах

1. Carefully remove the crepe maker and all accessories from the packaging.
2. Inspect the appliance for any damage during transit. If damage is found, do not operate and contact customer support.
3. Remove all packaging materials, stickers, and protective films from the unit.

4.2 Анхны цэвэрлэгээ

1. Наалддаггүй хоол хийх тавагуудыг зараар арчинаamp cloth or sponge and mild detergent. Rinse thoroughly with a clean, damp даавуу.
2. Dry the plates completely before use.
3. Clean the stainless steel body with a damp даавуу.

4.3 Байршил

1. Place the crepe maker on a stable, level, and heat-resistant countertop.
2. Ensure there is sufficient space around the appliance for ventilation (at least 6 inches / 15 cm on all sides).
3. Plug the power cord into a grounded electrical outlet that matches the appliance's voltage шаардлага.

5. Үйл ажиллагаа

5.1 Температурын хяналт

The crepe maker features two independent temperature control knobs, one for each cooking plate. This allows you to cook at different temperatures simultaneously or keep one plate warm while using the other.

Figure 5.1: Temperature Control Knob

• Turn the knob clockwise to increase the temperature and counter-clockwise to decrease it.
• Температурын хүрээ 122°F-ээс 572°F (50°C-300°C) байна.
• The heat indicator light will illuminate when the heating elements are active and turn off when the set temperature is reached. It will cycle on and off during operation to maintain the temperature.

5.2 Making Crepes/Pancakes

1. Ensure the crepe maker is plugged in and placed on a stable surface.
2. Turn the temperature control knob(s) to your desired cooking temperature. Allow the plates to preheat until the heat indicator light turns off (approximately 3-5 minutes).
3. Lightly grease the non-stick cooking plate with a small amount of cooking oil or butter, if desired, for the first crepe.
4. Pour a ladle of crepe batter onto the center of the hot plate.
5. Immediately use a wooden spreader (provided) to spread the batter evenly in a circular motion to form a thin crepe.
6. Cook for approximately 1-2 minutes, or until the edges begin to crisp and the surface appears set.
7. Using a spatula, gently flip the crepe and cook the other side for another 30-60 seconds, or until golden brown.
8. Remove the cooked crepe from the plate and repeat the process for additional crepes.

Figure 5.2: Crepe Making Process

5.3 Сургалтын видео

This video provides a visual guide to operating the crepe maker, including setup and cooking techniques.

6. Цэвэрлэгээ ба засвар үйлчилгээ

Regular cleaning and proper maintenance will extend the life of your VEVOR Electric Crepe Maker.

6.1 Хэрэглэх бүрийн дараа цэвэрлэх

1. Төхөөрөмжийг унтрааж, цахилгааны залгуураас салга.
2. Allow the cooking plates to cool completely before cleaning.
3. Зөөлөн сойз эсвэл damp cloth to wipe away any food residue from the non-stick plates. For stubborn residue, a small amount of mild dish soap can be used, followed by wiping with a clean, damp даавуу.
4. Do not use abrasive cleaners, metal scouring pads, or sharp objects, as these can damage the non-stick coating.
5. Remove and empty the drip tray. Wash it with warm, soapy water, rinse, and dry thoroughly before reinserting.
6. Wipe the stainless steel exterior with a clean, damp даавуу.

Figure 6.1: Cleaning the Non-Stick Plates

6.2 Хадгалалт

Ensure the crepe maker is clean and completely dry before storing. Store in a cool, dry place, away from direct sunlight and moisture.

7. Алдаа засах

If you encounter issues with your crepe maker, refer to the following common problems and solutions:

8. Баталгаат хугацаа ба хэрэглэгчийн дэмжлэг

VEVOR products are designed for durability and performance. For warranty information, technical assistance, or any questions regarding your VEVOR Electric Crepe Maker, please contact VEVOR customer support through their official webтухайн бүтээгдэхүүнийг худалдаж авсан сайт эсвэл жижиглэнгийн худалдаачин.

Please have your model number (HT-2E) and purchase information ready when contacting support.