1. Танилцуулга
Thank you for choosing the lightmaXX LED Blinder 2. This professional stage lighting fixture is designed to provide powerful and versatile illumination for various applications. Featuring two 50-watt warm white COB LEDs, DMX control, and a strobe function, it offers robust performance and flexible integration into your lighting setup. Please read this manual thoroughly before operation to ensure safe and optimal use of your device.
2. Аюулгүй ажиллагааны заавар
Цахилгаан цочрол, гал түймэр, гэмтлээс урьдчилан сэргийлэхийн тулд дараах аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.
- Энэ төхөөрөмж нь зөвхөн мэргэжлийн хэрэглээнд зориулагдсан.
- Эрчим хүчний хангамжийн хэмжээг баталгаажуулна ууtage нь төхөөрөмжийн шаардлагад нийцдэг.
- Төхөөрөмжийг бороо, чийгэнд бүү тавь.
- Төхөөрөмжийг үргэлж газардуулсан цахилгаан залгуурт холбоно уу.
- Гэрийг бүү нээ. Дотор нь хэрэглэгчийн засварлах боломжтой эд анги байхгүй. Бүх засвар үйлчилгээг мэргэшсэн ажилтнуудад даатга.
- Нүдний гэрлийн эх үүсвэрт шууд өртөхөөс зайлсхий.
- Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд хангалттай агааржуулалтыг хангана.
- Always secure the device with a safety cable when mounting overhead.
- Цэвэрлэх, засвар үйлчилгээ хийхээс өмнө цахилгааныг салга.
3. Бүтээгдэхүүн дууссанview
The lightmaXX LED Blinder 2 features a robust design with two powerful COB LEDs and intuitive controls.
Зураг 3.1: Урд view of the lightmaXX LED Blinder 2, showing the two illuminated COB LEDs.
Зураг 3.2: Урд view of the lightmaXX LED Blinder 2, illustrating the power cable connection point.
Figure 3.3: Rear panel of the lightmaXX LED Blinder 2, detailing the control display, DMX In/Out, Power In/Out, and safety rope attachment point.
Figure 3.4: Close-up of the control panel, showing the digital display and navigation buttons (MENU, UP, DOWN, ENTER).
3.1 Бүрэлдэхүүн хэсэг
- 2 x 50W Warm White COB LEDs
- Digital Display and Control Buttons (MENU, UP, DOWN, ENTER)
- DMX In/Out (3-pin XLR)
- Power In/Out (IEC)
- Тохируулга хийх бэхэлгээ
- Safety Rope Attachment Point
4. Тохиргоо
4.1 Суурилуулалт
The lightmaXX LED Blinder 2 comes with a versatile mounting bracket for truss, floor, or stand mounting. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable (not included) when mounting the unit overhead to prevent accidental falls.
- Attach the mounting bracket securely to a truss clamp эсвэл зогсох.
- Adjust the angle of the fixture using the side knobs on the bracket.
- Connect a safety cable from the fixture's safety rope attachment point to the mounting structure.
4.2 Эрчим хүчний холболт
Connect the supplied power cable to the "POWER IN" IEC connector on the rear of the unit and then to a suitable grounded power outlet. The "POWER OUT" connector allows for daisy-chaining power to multiple units (check maximum power draw before connecting multiple units).
4.3 DMX холболт (заавал биш)
For DMX control, connect a DMX cable from your DMX controller's output to the "DMX IN" port on the blinder. To daisy-chain multiple DMX fixtures, connect a DMX cable from the "DMX OUT" port of the first blinder to the "DMX IN" port of the next fixture in the chain. Terminate the last fixture in the DMX chain with a DMX terminator.
5. Ашиглалтын заавар
5.1 Хяналтын самбарын ажиллагаа
Цэс рүү шилжиж, тохиргоог тохируулахын тулд арын самбар дээрх дөрвөн товчлуурыг ашиглана уу:
- Цэс: Enters the menu or goes back to the previous menu level.
- ДЭЭШ: Scrolls up through menu options or increases a value.
- ДООШ: Scrolls down through menu options or decreases a value.
- ОРУУЛАХ: Сонголтыг баталгаажуулах эсвэл дэд цэс рүү орно.
5.2 DMX Modes and Channel Assignment
The lightmaXX LED Blinder 2 supports 6 DMX channels. Refer to the DMX chart below for specific channel functions. Set the DMX address using the control panel. The default DMX address is A001.
| Суваг | Чиг үүрэг | Утгын хүрээ | Тодорхойлолт |
|---|---|---|---|
| 1 | Мастер Диммер | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) |
| 2 | LED 1 бүдэгрүүлэгч | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 1 |
| 3 | LED 2 бүдэгрүүлэгч | 0-255 | 0 = Off, 1-255 = Dimmer (0-100%) for LED 2 |
| 4 | Строб эффект | 0-255 | 0 = No Strobe, 1-127 = Strobe Speed, 128-255 = Pulse/Random Strobe |
| 5 | Суулгасан програмууд | 0-255 | Selects various pre-programmed light shows |
| 6 | Програмын хурд | 0-255 | Adjusts the speed of selected built-in programs |
5.3 Standalone Modes
The blinder can operate without a DMX controller using its built-in programs or sound-activated mode. Access these modes via the control panel menu.
- Авто горим: Cycles through pre-programmed light sequences.
- Дууны идэвхтэй горим: The light reacts to ambient sound via the built-in microphone.
- Manual Dimmer: Adjust the brightness of each LED directly from the menu.
6. Засвар үйлчилгээ
Regular maintenance ensures the longevity and optimal performance of your lightmaXX LED Blinder 2.
- Цэвэрлэгээ: Disconnect the power before cleaning. Use a soft, lint-free cloth to wipe the exterior. For stubborn dirt, a slightly damp даавуу хэрэглэж болно. Зүлгүүрийн цэвэрлэгч эсвэл уусгагч хэрэглэж болохгүй.
- Fan and Vent Cleaning: Periodically check and clean the cooling fan and ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.
- Кабелийн үзлэг: Regularly inspect power and DMX cables for any signs of damage (cuts, frayed wires). Replace damaged cables immediately.
- Хадгалах: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a suitable flight case.
7. Алдаа засах
If you encounter issues with your lightmaXX LED Blinder 2, refer to the following common problems and solutions:
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хүч чадалгүй | Power cable disconnected; no power from outlet; blown fuse. | Check power cable connection; test outlet with another device; check and replace fuse if necessary (refer to qualified technician). |
| DMX хяналт байхгүй | Incorrect DMX address; faulty DMX cable; no DMX signal from controller; DMX terminator missing. | Verify DMX address matches controller; test DMX cable; ensure DMX controller is sending signal; add DMX terminator to the last fixture. |
| Гэрэл анивчих эсвэл тогтворгүй ажиллах | Poor DMX signal; electrical interference; overheating. | Check DMX cable quality and connections; ensure proper grounding; provide adequate ventilation. |
| Нэгж хэт халсан | Агааржуулалт бөглөрсөн; орчны өндөр температурт ажилладаг. | Clear all ventilation openings; ensure sufficient space around the unit for airflow; operate within specified temperature range. |
If the problem persists after trying these solutions, please contact lightmaXX customer support or your authorized dealer.
8. Техникийн үзүүлэлтүүд
| Онцлог | Дэлгэрэнгүй |
|---|---|
| Брэнд | lightmaXX |
| Загварын дугаар | LIG0016526-000 |
| Гэрлийн эх үүсвэр | 2 x 50W COB Warm White LEDs |
| DMX сувгууд | 6 суваг |
| Хяналтын горимууд | DMX, Auto, Sound Active, Manual |
| Хэмжээ (L x W x H) | 31.2 x 18.7 x 18.5 см (ойролцоогоор 12.28 x 7.36 x 7.28 инч) |
| Эрчим хүчний эх үүсвэр | Утастай цахилгаан |
| Суурилуулалтын төрөл | Ceiling Mount (with bracket) |
| Өнгө | Хар |
9. Баталгаат хугацаа ба дэмжлэг
Specific warranty information for the lightmaXX LED Blinder 2 is not provided in this manual. Please refer to your purchase documentation, the lightmaXX official website, or contact your retailer for details regarding warranty coverage and terms.
For technical support, service, or spare parts inquiries, please contact lightmaXX customer service or your authorized dealer. Ensure you have your model number (LIG0016526-000) and purchase date available when contacting support.
Manufacturer: lightmaXX
