Бүтээгдэхүүн дууссанview
The lightmaXX CLS Nano RGBW is an LED lighting system featuring four spotlights, designed for use on theater and stage productions. Its compact size and low weight also make it suitable for mobile applications.
Each spotlight is equipped with three powerful 4W QCL LEDs, contributing to a total power consumption of 48 watts. The COB LEDs incorporate red, green, blue, and white primary colors, allowing for the creation of a wide spectrum of other colors through mixing. The beam angle is 25 degrees. Additionally, the QCL LEDs offer stepless dimming from 0-100% and can produce a powerful strobe effect. Control options include DMX and music control.
The lightmaXX CLS Nano RGBW LED Spot Set, showcasing its four individual spotlights mounted on a central bar, with the LEDs emitting green light.
Аюулгүй ажиллагааны зааварчилгаа
Төхөөрөмжийг ажиллуулахаасаа өмнө бүх аюулгүй байдлын зааврыг уншиж, ойлгоно уу. Үүнийг дагаж мөрдөөгүй тохиолдолд гэмтэл бэртэл авах эсвэл бүтээгдэхүүнд гэмтэл учруулж болзошгүй.
- Төхөөрөмжийг үргэлж газардуулсан цахилгаан залгуурт холбоно уу.
- Хэт халалтаас урьдчилан сэргийлэхийн тулд төхөөрөмжийн эргэн тойронд агааржуулалтыг сайтар хангана.
- Төхөөрөмжийг бороо, чийгэнд бүү тавь.
- Нүдний гэрлийн эх үүсвэрт шууд өртөхөөс зайлсхий.
- Зөвхөн мэргэшсэн ажилтнууд үйлчилгээ эсвэл засвар үйлчилгээ хийх ёстой.
- Цэвэрлэх, засвар үйлчилгээ хийхээс өмнө цахилгааныг салга.
Тохиргоо
Савлаж байна
Carefully remove the CLS Nano RGBW from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future storage or transport.
Суурилуулалт
The CLS Nano RGBW is designed for secure mounting on a lighting stand or truss system. Use appropriate clamps and safety cables (not included) to ensure the unit is securely fastened and cannot fall. Ensure the mounting surface can support the weight of the fixture (7.13 kg).
Холболтууд
Төхөөрөмжийг дараах байдлаар холбоно уу.
- Эрчим хүчний холболт: Use the provided IEC power cable to connect the unit to a suitable mains power outlet.
- DMX холболт (заавал биш): For DMX control, connect a 3-pin XLR DMX cable from your DMX controller's output to the unit's DMX IN port. If linking multiple units, connect from the first unit's DMX OUT to the next unit's DMX IN.
Нарийвчилсан ар тал view of the lightmaXX CLS Nano RGBW, highlighting the power input, DMX In/Out ports, and the digital control display with navigation buttons.
Ашиглалтын заавар
Хяналтын самбар дууссанview
The control panel on the rear of the unit features a digital display and four buttons:
- Цэс: Үндсэн цэсний сонголтуудаар шилжинэ.
- ДЭЭШ: Increases values or moves up through menu options.
- ДООШ: Decreases values or moves down through menu options.
- ОРУУЛАХ: Сонголтыг баталгаажуулах эсвэл дэд цэс рүү орно.
Үйлдлийн горимууд
The CLS Nano RGBW offers several operating modes:
- DMX горим: For external control via a DMX controller.
- Авто горим: Runs pre-programmed light shows automatically.
- Дуу идэвхжүүлсэн горим: Reacts to music or sound via a built-in microphone.
- Статик өнгөний горим: Displays a single, constant color.
DMX хяналт
To operate the unit via DMX, set the DMX address using the control panel. Refer to the DMX channel chart in the full manual for specific channel functions (e.g., Dimmer, Red, Green, Blue, White, Strobe, Programs).
Авто програмууд
Navigate to the Auto mode setting using the MENU button. Use UP/DOWN to select different built-in programs. Press ENTER to confirm. Some programs may allow adjustment of speed or intensity.
Дуу идэвхжүүлсэн горим
Select the Sound-Activated mode from the menu. The unit will use its internal microphone to react to ambient sound. Adjust the microphone sensitivity if available in the menu to fine-tune the response.
Статик өнгөний горим
In Static Color mode, you can manually select a desired color. Use the UP/DOWN buttons to adjust the intensity of Red, Green, Blue, and White LEDs to create custom colors.
The lightmaXX CLS Nano RGBW LED Spot Set displaying a vibrant red color output from its four spotlights.
The lightmaXX CLS Nano RGBW LED Spot Set illuminating with a deep blue color.
The lightmaXX CLS Nano RGBW LED Spot Set producing a bright white light.
The lightmaXX CLS Nano RGBW LED Spot Set emitting a warm yellow light.
The lightmaXX CLS Nano RGBW LED Spot Set displaying a cool cyan light.
The lightmaXX CLS Nano RGBW LED Spot Set showcasing a rich purple illumination.
The lightmaXX CLS Nano RGBW LED Spot Set with its spotlights in an off state, showing the clear lenses.
Засвар үйлчилгээ
Цэвэрлэгээ
Regular cleaning helps maintain optimal performance and appearance. Disconnect the unit from power before cleaning.
- Зөөлөн, хөвөнгүй даавуугаар гадна талыг нь арчих.
- Линзний хувьд тусгай зориулалтын линз цэвэрлэгч, зурааснаас зайлсхийхийн тулд зөөлөн даавуу хэрэглээрэй.
- Зүлгүүрийн цэвэрлэгч, уусгагч, химийн хатуу бодис хэрэглэж болохгүй.
Хадгалах
When not in use for extended periods, store the CLS Nano RGBW in its original packaging or a suitable flight case. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Алдааг олж засварлах
Энэ хэсэгт танд тулгарч болох нийтлэг асуудлуудыг авч үзэх болно. Хэрэв асуудал хэвээр байвал хэрэглэгчийн тусламжтай холбогдоно уу.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Хүч чадалгүй | Power cable disconnected; Outlet not active; Fuse blown | Check power cable connection; Test outlet with another device; Replace fuse (if applicable and safe to do so) |
| DMX хяналт байхгүй | Incorrect DMX address; Faulty DMX cable; DMX controller issue; Master/Slave conflict | Verify DMX address setting; Test/replace DMX cable; Check DMX controller output; Ensure correct Master/Slave configuration |
| Lights not responding in Auto/Sound mode | Incorrect mode selected; Microphone sensitivity too low (Sound mode) | Ensure correct operating mode is selected; Adjust microphone sensitivity in Sound mode |
| Нэгж хэт халсан | Insufficient ventilation; Blocked cooling vents | Ensure adequate space around the unit; Clean any dust or debris from cooling vents |
Үзүүлэлтүүд
| Загвар | LIG0015656-000 |
| Брэнд | lightmaXX |
| Хэмжээ (L x W x H) | 88.6 x 38 x 18.8 см |
| Жин | 7.13 кг |
| LED төрөл | 4 x (3x 4W QCL RGBW LEDs) |
| Нийт эрчим хүчний хэрэглээ | 48 ватт |
| Цацрагийн өнцөг | 25° |
| Хяналтын горимууд | DMX, Auto, Sound-activated, Static Color |
| Онцлогууд | Dimmable, Strobe Effect, DMX Control, Music Control, RGBW LED |
| Эрчим хүчний эх үүсвэр | Mains Power (IEC C14) |
| Үйлдвэрлэгч | lightmaXX |
| Гарал үүслийн улс | Герман |
| Эхний боломжтой огноо | 15 оны нэгдүгээр сарын 2020 |
Баталгаат болон дэмжлэг
This lightmaXX product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact the seller directly.
For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your authorized lightmaXX dealer or the manufacturer's customer service department. Keep your purchase receipt and model number (LIG0015656-000) ready when contacting support.
