Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit Manual

1. Танилцуулга

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. Аюулгүй ажиллагааны заавар

Энэ бүтээгдэхүүнийг суурилуулах эсвэл засвар үйлчилгээ хийхдээ гэмтэл бэртэл, эвдрэлийн эрсдэлийг бууруулахын тулд үндсэн аюулгүй байдлын урьдчилан сэргийлэх арга хэмжээг үргэлж дагаж мөрдөөрэй.

Мэргэжлийн суурилуулалтыг санал болгож байна: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
Зааврыг уншина уу: Суулгахаасаа өмнө бүх зааврыг анхааралтай уншина уу.
Хамгаалалтын хэрэгсэл өмсөх: Use appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
Гэмтлийг шалгах: Before installation, inspect the product for any signs of damage. Do not install damaged components.
Зөв агааржуулалт: Ensure adequate ventilation during and after installation.
Хүүхдийн гар хүрэхгүй газар хадгална уу: Энэ бүтээгдэхүүн нь тоглоом биш юм. Хүүхдэд хүрэхгүй газар хадгал.
Устгах: Dispose of packaging materials responsibly and according to local regulations.

3. Багцын агуулга

Суулгацыг үргэлжлүүлэхийн өмнө бүх бүрэлдэхүүн хэсгүүд байгаа бөгөөд гэмтэлгүй эсэхийг шалгаарай.

1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
Installation accessories (e.g., mounting screws, seals - may vary by kit version)
Хэрэглэгчийн гарын авлага (энэ баримт бичиг)

4. Тохиргоо & Суурилуулалт

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

Байршлыг сонгох: Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
Нээлтийн бэлтгэл: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's webсайт).
Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
Хамгаалалтын нэгж: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
Apply Seals: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
Туршилтын функц: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official webсайт.

5. Ашиглалтын заавар

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

Автомат тохируулга: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
Акустик гүйцэтгэл: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
Хэрэглэгчийн хяналт байхгүй: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. Засвар үйлчилгээ

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

Цэвэрлэх давтамж: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
Цэвэрлэх журам:
1. Gently remove the front cover of the air inlet.
2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
3. Гадна гадаргууг зар сурталчилгаагаар арчинаamp даавуу. Зүлгүүрийн цэвэрлэгч, уусгагчийг бүү ашигла.
4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
5. Урд талын тагийг найдвартай холбоно уу.
Саад болохгүй: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
Шалгалт: Төхөөрөмжийг үе үе шалгаж, эвдрэл, элэгдлийн шинж тэмдэг байгаа эсэхийг шалгаарай.

7. Алдаа засах

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

Асуудал	Боломжит шалтгаан	Шийдэл
Агаарын урсгал хангалтгүй	Air inlet or outer grille is obstructed. Dust accumulation on internal components. Humidity sensor is blocked or faulty. Incorrect installation or sealing.	Саадыг шалгаж, арилгах. Clean the air inlet as described in the Maintenance section. Ensure the humidity sensor is clear. If still faulty, contact support. Verify proper installation and sealing.
Хэт их дуу чимээ	Loose components or improper sealing. External noise sources. Air inlet operating at maximum flow due to high humidity.	Check mounting screws and seals. Identify and address external noise sources. This is normal operation. Ensure the unit is clean.
Unit Not Adjusting	Humidity sensor is dirty or damaged. Mechanical obstruction of the adjustment mechanism.	Clean the humidity sensor. If still unresponsive, the sensor may be faulty. Хөдөлгөөнд саад болж буй аливаа физик саад бэрхшээлийг шалгана уу.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. Техникийн үзүүлэлтүүд

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

Загварын дугаар: 11014085 (also AJA50015)
Брэнд: ALDES
Төрөл: Hygro-Adjustable Acoustic Air Inlet Kit
Агаарын урсгалын хүрээ: 6 to 45 Liters per second (L/s)
Acoustic Attenuation: 39 дБ
Өнгө: Цагаан
Дүрс: Тэгш өнцөгт
Үйлдвэрлэгч: ALDES AERAULIQUE
Оруулсан бүрэлдэхүүн хэсгүүд: 1 Product (Air Inlet Unit)
Шаардлагатай батерей: Үгүй
Бүтээгдэхүүний ангилал: Performance Part (HVAC, Ducts)
ASIN: B00DCK2EMW

9. Баталгаат хугацаа ба дэмжлэг

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

Үйлдвэрлэгч: ALDES AERAULIQUE
Webсайт: www.aldes.com
Харилцагчийн үйлчилгээ: Refer to the ALDES webбүс нутгийн холбоо барих мэдээллийн сайт.
Сэлбэг хэрэгсэл: Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.

	Aldes EHL L 6-44 m³/h - 39 dB - White: Acoustic Hygrometric Air Inlet Kit Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
	Aldes EHL S 6-44 m³/h - 37 dB - White: Hygro-Regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow, and ceiling-directed air flow. Includes technical specifications, dimensions, and installation guidelines.
	Aldes EHL S 6-44 m³/h - 37 dB Aluminium Air Inlet - Technical Specifications Detailed technical specifications for the Aldes EHL S 6-44 m³/h - 37 dB Aluminium hygro-regulated air inlet, including features, dimensions, acoustic data, and installation guidelines.
	Aldes EHL L 6-44 м³/ц - 39 дБ Антрацит Гигро зохицуулалттай агаарын оролт Антрацит дахь 11014138 загвар, Aldes EHL L-ийн гигро зохицуулалттай агаарын оролтын техникийн үзүүлэлтүүд ба суурилуулах гарын авлага. 42 дБ хүртэл акустик сулруулах, 6-44 м³/цаг агаарын урсгалыг тохируулах боломжтой.
	Aldes EHL S 6-44 m³/h - 37 dB - Brown Hygro-regulated Air Inlet Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
	Aldes EHL S 6-44 m³/h - 37 dB - Anthracite: Hygro-regulated Air Inlet Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit