1. Танилцуулга
The AMP Research PowerStep is an automatic, electric-powered running board designed to provide convenient and safe access to your truck. It extends instantly when the vehicle door is opened and retracts out of sight when the doors close, offering improved ground clearance, aerodynamics, and a clean appearance. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your PowerStep system.
Гол онцлогууд:
- Автомат байршуулалт: Steps extend and retract automatically with door operation.
- Бат бөх барилга: Features die-cast aluminum alloy components and precision stainless steel pivot pins for stability.
- Өндөр ачааллын багтаамж: 6-inch wide, cab-length step boards capable of supporting a 600 lb. load.
- Сайжруулсан аюулгүй байдал: Textured, slip-resistant stepping surface, onboard LED lighting, and 'Anti-Pinch' technology.
- Vehicle-Specific Fitment: Designed for 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax models.
2. Тохиргоо ба суурилуулалт
The AMP Research PowerStep is engineered for straightforward installation. For detailed, step-by-step instructions specific to your vehicle model, please refer to the official Суулгах гарын авлага (PDF)Энэ хэсэгт ерөнхий мэдээлэл өгөгдсөнview.
Суулгахаас өмнө анхаарах зүйлс:
- Ensure you have all components listed in the packing list.
- Basic tools are required. Some installations may require drilling small hole(s).
- Verify vehicle compatibility (2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax).
Суулгах ерөнхий алхамууд:
- Review the complete installation manual before beginning.
- Mount the PowerStep linkage assemblies to the vehicle's frame.
- Attach the step boards to the linkage assemblies.
- Install the control module and connect the wiring harness to the vehicle's electrical system.
- Connect the LED step lights.
- Test the operation of the PowerSteps to ensure proper deployment and retraction.
Зураг: The AMP Research PowerStep running boards, ready for installation.
Image: A person demonstrating the ease of entry into a truck with the PowerStep deployed.
3. Үйл ажиллагаа
The AMP Research PowerStep system is designed for intuitive, automatic operation, requiring no manual intervention once installed correctly.
Automatic Deployment and Retraction:
- When a vehicle door is opened, the PowerStep will automatically deploy within approximately one second, providing a convenient step.
- When all vehicle doors are closed, the PowerStep will retract and stow itself discreetly under the vehicle, typically within three seconds.
- The integrated LED lights illuminate the step area upon deployment for enhanced visibility in low-light conditions.
- The 'Anti-Pinch' technology is designed to detect obstructions during retraction and will stop the step's movement to prevent injury or damage.
Зураг: Ойрын зураг view highlighting the textured, slip-resistant surface of the PowerStep, ensuring secure footing.
4. Засвар үйлчилгээ
Тогтмол засвар үйлчилгээ нь таны урт наслалт, оновчтой гүйцэтгэлийг баталгаажуулдаг AMP Research PowerStep.
Цэвэрлэгээ:
- Periodically clean the step surface and the linkage mechanisms to remove dirt, mud, salt, or other debris.
- Use a mild soap and water solution. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Цэвэр усаар сайтар зайлж угаана.
Шалгалт:
- Inspect the pivot points and moving parts for any signs of wear or damage.
- Ensure all fasteners are secure. Do not overtighten.
- Check the wiring for any fraying or exposed sections.
- Lubricate the pivot points with a silicone-based lubricant as needed, especially in harsh weather conditions.
5. Алдаа засах
If you encounter issues with your PowerStep, refer to the table below for common problems and their potential solutions.
| Асуудал | Боломжит шалтгаан | Шийдэл |
|---|---|---|
| Steps do not deploy or retract. | Power supply issue, loose wiring, motor malfunction, or obstruction. | Check vehicle's fuse box. Inspect all wiring connections for tightness and corrosion. Remove any obstructions. If problem persists, consult the full installation manual or professional assistance. |
| Steps are noisy during operation. | Lack of lubrication, dirt/debris in mechanism. | Clean the linkage mechanisms thoroughly. Apply a silicone-based lubricant to all pivot points. |
| LED гэрэл ажиллахгүй байна. | Loose connection, damaged wiring, or faulty LED. | Check the wiring connections to the LED lights. Inspect for any visible damage to the light strips. |
| Steps deploy unevenly or are crooked. | Improper installation, loose mounting hardware, or damaged linkage. | Re-check mounting hardware for proper torque. Ensure the linkage arms are not bent or damaged. Refer to the installation manual for correct alignment. |
Зураг: Доод тал view of the PowerStep, illustrating the low-profile LED lighting and robust construction.
6. Техникийн үзүүлэлтүүд
| Атрибут | Дэлгэрэнгүй |
|---|---|
| Брэнд | AMP Судалгаа |
| Загварын дугаар | 75137-01A |
| Материал | Хөнгөн цагаан |
| Өнгө | Хар |
| Гаднах өнгөлгөө | Будсан |
| Хэмжээ (L x W x H) | 8 x 81 x 13 инч |
| Зүйлийн жин | 45 фунт |
| Жингийн хязгаарлалт | 600 фунт |
| UPC | 815410010347 |
| Тээврийн хэрэгслийн үйлчилгээний төрөл | Truck (Specifically 2007 - 2021 Toyota Tundra Crew Cab/Double Cab/Extended Crew Cab/CrewMax) |
7. Баталгаат хугацаа ба дэмжлэг
Баталгаат мэдээлэл:
AMP Research stands behind its products with a hassle-free, comprehensive 5 жил / 60,000 милийн баталгаа. Энэхүү баталгаа нь ердийн ашиглалтын үед хийгдсэн материал, хийцийн согогийг хамарна. Баталгаат заргад зориулж худалдан авалтаа нотлох баримтаа үлдээнэ үү.
Хэрэглэгчийн дэмжлэг:
For further assistance, technical support, or warranty claims, please contact AMP Research customer service. You may also find additional resources and FAQs on the official AMP Судалгаа webсайт.
For the complete installation guide and other documentation, please refer to the албан ёсны хэрэглэгчийн гарын авлага PDF.
