Goobay Digital Timer NK ZSU 2 (Загвар 51277) Зааварчилгааны гарын авлага

1. Танилцуулга

Thank you for choosing the Goobay Digital Timer NK ZSU 2. This device is designed to automatically control the power supply to electrical appliances, helping you save energy and manage your daily routines efficiently. Please read this manual carefully before operating the timer to ensure proper use and to prevent damage.

This digital timer features up to 10 programmable ON/OFF switching programs per day or week, an LCD display for clear readability, and an internal backup battery to retain settings during power outages.

2. Аюулгүй ажиллагааны заавар

• This device is intended for indoor use only. Do not expose it to moisture, direct sunlight, or extreme temperatures.
• Ensure the total load of connected appliances does not exceed the maximum rating of 16 A / 3680 W. Overloading can cause damage to the timer and connected devices, and poses a fire hazard.
• Таймерыг задлах эсвэл засах гэж бүү оролдоорой. Бүх засвар үйлчилгээг мэргэшсэн ажилтнуудад даатга.
• Хүүхдийн гар хүрэхгүй газар хадгална.
• Always insert the timer fully into a wall socket.
• If the timer is damaged, discontinue use immediately.

3. Бүтээгдэхүүн дууссанview

The Goobay Digital Timer NK ZSU 2 is a compact plug-in device with an integrated digital display and control buttons. It features a standard European Schuko plug and socket.

Зураг 3.1: Урд view of the Goobay Digital Timer NK ZSU 2, showing the LCD display and control buttons.

3.1. Control Buttons and Display

The timer features an LCD display and several buttons for setting the time and programming functions:

• MASTER CLEAR: Resets all settings and programs to factory defaults.
• ДОЛОО ХОНОГ: Долоо хоногийн өдрийг тохируулна.
• ЦАГ: Sets the hour.
• МИНУТ: Sets the minute.
• RST/RCL: Resets a specific program or recalls a program.
• ЦАГ: Used in conjunction with WEEK, HOUR, MINUTE to set the current time.
• TIMER: Enters or exits programming mode.
• Асаах/АВТО/УНТРААХ: Selects the operating mode (Always ON, Automatic, Always OFF).
• САНАМСАРГҮЙ: Activates or deactivates the random function.

Зураг 3.2: Close-up of the timer's buttons, illustrating their primary functions: Reset all settings, Reset all programs, Timer function, and Random function.

4. Анхны тохиргоо

4.1. First Use and Backup Battery

Before first use, plug the timer into a live wall socket for approximately 5-10 minutes to charge the internal backup battery. This battery ensures that your settings are retained for up to 4 days in case of a power outage or when the timer is unplugged.

Зураг 4.1: Illustration of the timer's backup battery feature, which prevents loss of programming during power interruptions.

4.2. Master Clear

To clear all current settings and programs, press the МАСТЕР КЛИР button using a pointed object (e.g., a pen tip). The display will show '0:00' and all settings will be reset.

5. Одоогийн цагийг тохируулах

Follow these steps to set the current day and time:

1. -г удаан дар ЦАГ товч.
2. Барьж байхдаа ЦАГ, дарна уу ДОЛОО ХОНОГ repeatedly until the correct day of the week is displayed (MO, TU, WE, TH, FR, SA, SU).
3. Барьж байхдаа ЦАГ, дарна уу ЦАГ repeatedly until the correct hour is displayed.
4. Барьж байхдаа ЦАГ, дарна уу МИНУТ repeatedly until the correct minute is displayed.
5. -г суллана ЦАГ button. The current time is now set.

6. Үйлдлийн горимууд

The timer has three main operating modes, selected by pressing the АСААЛТ/АВТО/УНТРААХ товч:

• АСААЛТ: The connected appliance is continuously powered ON, ignoring all programmed settings.
• АВТО: The connected appliance operates according to the programmed ON/OFF times. This is the standard mode for automatic control.
• Унтрааж байна: The connected appliance is continuously powered OFF, ignoring all programmed settings.

Ensure the timer is set to АВТО mode for your programs to execute.

7. Programming Timer Events

The timer allows you to set up to 10 different ON/OFF programs. Each program can be set for a specific day, a group of days, or all days of the week.

Зураг 7.1: Visual guide for programming the timer, highlighting the AUTO mode requirement and the use of WEEK, HOUR, and MINUTE buttons.

7.1. Setting an ON/OFF Program

1. дээр дарна уу TIMER button once. The display will show '1 ON'. This indicates you are setting the first ON time.
2. дарна уу ДОЛОО ХОНОГ repeatedly to select the desired day(s) for this program. Options include individual days, weekdays, weekends, or all days.
3. дарна уу ЦАГ repeatedly to set the desired hour for the ON time.
4. дарна уу МИНУТ repeatedly to set the desired minute for the ON time.
5. дээр дарна уу TIMER button again. The display will show '1 OFF'. This indicates you are setting the first OFF time.
6. Repeat steps 2-4 to set the desired day(s), hour, and minute for the OFF time.
7. To set additional programs (up to 10), press TIMER again and repeat steps 1-6 for '2 ON', '2 OFF', and so on.
8. Хүссэн бүх програмаа тохируулсны дараа товчийг дарна уу ЦАГ Програмчлалын горимоос гарч, одоогийн цагийн дэлгэц рүү буцахын тулд товчийг дарна уу.

7.2. Дахинviewing and Deleting Programs

• Дахин хэлэхэдview your programs, press the TIMER button repeatedly. Each press will cycle through the ON/OFF times of your programs.
• To delete a specific program, navigate to the desired ON or OFF setting using the TIMER товчийг дараад дараа нь дарна уу RST/RCL button. This will clear the time for that specific ON or OFF event.

8. Санамсаргүй функц

The random function is designed to simulate occupancy, which can be useful for security purposes. When activated, the timer will randomly switch the connected appliance ON for 10-31 minutes during the period from 6:00 PM to 6:00 AM.

8.1. Activating/Deactivating Random Function

1. Цаг хэмжигч асаалттай байгаа эсэхийг шалгана уу АВТО горим.
2. дээр дарна уу Санамсаргүй button. The display will show 'R' to indicate the random function is active.
3. Идэвхгүй болгохын тулд товчийг дарна уу Санамсаргүй button again. The 'R' indicator will disappear.

9. Засвар үйлчилгээ

• Clean the timer with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Ensure the timer is unplugged from the wall socket before cleaning.
• Таймерыг ашиглаагүй үед сэрүүн, хуурай газар хадгална.

10. Алдаа засах

• Дэлгэц хоосон байна: The internal backup battery may be depleted. Plug the timer into a live socket for 5-10 minutes to charge it. If the issue persists, the timer may be faulty.
• Програмууд ажиллахгүй байна: Ensure the timer is set to АВТО mode. Check that the current time is set correctly and that the ON/OFF programs are properly configured.
• Төхөөрөмж асахгүй/унтрахгүй: Verify the appliance is correctly plugged into the timer and is functioning independently. Check the timer's operating mode (should be AUTO).
• All settings lost after power outage: The backup battery may not be sufficiently charged or may be at the end of its lifespan. Ensure the timer is regularly plugged in to maintain battery charge.

11. Техникийн үзүүлэлтүүд

Refer to the following technical specifications for the Goobay Digital Timer NK ZSU 2:

• Загварын дугаар: 51277
• Оруулах: 230 В хүчдэл, 50 Гц
• Гаралт: 230 В хүчдэл, 50 Гц
• Макс. Ачаалах: 16 А / 3680 Вт
• Дэлгэц: LCD
• Хөтөлбөрүүд: 10 хүртэлх асаах/унтраах хөтөлбөр
• Хамгийн бага интервал: 1 минут
• Ашиглалтын температур: -10 хэмээс +40 хэм хүртэл
• Нөөц батерей: NiMH 1.2 V > 100 h (retains settings for up to 4 days)
• Хамгаалалтын ангилал: IP20
• Хэмжээ: Approximately 57.7 mm (W) x 129.7 mm (H) x 44.4 mm (D)
• Жин: Ойролцоогоор 148 гр

Зураг 11.1: Dimensions of the Goobay Digital Timer NK ZSU 2, showing its compact size.

Зураг 11.2: Technical drawing and detailed specifications for the Goobay Digital Timer NK ZSU 2.

12. Баталгаат хугацаа ба дэмжлэг

Goobay products are manufactured with quality and reliability in mind. For information regarding warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. For technical support or inquiries, please visit the official Goobay webсайт эсвэл харилцагчийн үйлчилгээний хэлтэстэй холбогдоно уу.