MMD MXH Series Components Oscillator User Guide
- Low Profile SMD Package
- Hermetically Sealed
- Wide Frequency Range
- Custom Options Available
Electrical Specifications
| Frequency Range | 1.544MHZ to 66.666MHZ | ||||
| Temperature Stability* | (See Part Number Guide for Options) | ||||
| Operating Temperature Range | (See Part Number Guide for Options) | ||||
| Storage Temperature Range | -40°C to +85°C | ||||
| Aging (+25°C ±3°C) | ±5ppm for first year | ||||
| Supply Voltage ±10% (Vdd) | +1.80 VDC | +2.50 VDC | +3.30 VDC | +5.00 VDC | |
| Supply Current | 1.544MHZ to 9.999MHZ | 6mA max | 7mA max | 8mA max | 10mA max |
| 10.000MHZ to 34.999MHZ | 7mA max | 8mA max | 10mA max | 20mA max | |
| 35.000MHZ to 49.999MHZ | 15mA max | 20mA max | 25mA max | 50mA max | |
| 50.000MHZ to 66.000MHZ | 25mA max | 30mA max | 35mA max | 60mA max | |
| Waveform | HCMOS | ||||
| Logic “0” | 10% Vdd max | ||||
| Logic “1” | 90% Vdd min | ||||
| Rise/Fall Time (10% to 90% of Supply Voltage) | 4nSec | ||||
| Load | 15pF | ||||
| Symmetry (50% of waveform) | (See Part Number Guide for Options) | ||||
| Start-up Time | 10mSec max | ||||
| Absolute Clock Period Jitter | 1pSec | ||||
| Tri-State Operation | Voh = 70% of Vdd min to Enable OutputVol = 30% max or grounded to Disable Output (High Impedance) | ||||
| Standby Current (only with “S” Option) | <7 Micro Amps | ||||
| * Inclusive of Temperature., Load and Voltage | |||||
Environmental & Mechanical Detail
| Shock | MIL-STD-883, Method 2002, Cond B |
| Solderability | MIL-STD-883, Method 2003 |
| Solvent Resistance | MIL-STD-202, Method 215 |
| Vibration | MIL-STD-883, Meth 2007, Cond A |
| Gross Leak Test | MIL-STD-883, Meth 1014, Cond C |
| Fine Leak Test | MIL-STD-883, Meth 1014, Cond A2 |
| MSL | Level 1 per IPC/JEDEC J-STD 20 |
Part Number Guide
Please Consult with MMD Sales Department for any other Parameters or Options.
Mechanical Details
| Pin Connections | |
| Pin 1 | Tri-State / Standby |
| Pin 2 | Case Ground |
| Pin 3 | Output |
| Pin 4 | Supply Voltage |
Tape & Reel Dimensions
| PITCH | 4.00 [0.157] |
| TAPE WIDTH | 8.00 [0.315] |
| REEL DIA | 180 [7.0] |
| COUNT | 1000 |
| PIN 1 ORIENT | Q1 |
Notes: UNLESS OTHERWISE SPECIFIED.
- Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8mm through 200mm Embossed Carrier Tapping and 8mm and 12mm Punched Carrier Tapping of Surface Mount Components for Automatic Handling.
- Dimensions are in millimetres [inch].
- Tolerances are ±0.1 [0.004] mm unless otherwise specified.
- Do not scale drawing.
Revised J: 01/06/2023
www.mmdcomp.com
Downloaded from Arrow.com.
Documents / Resources
 |
MMD MXH Series Components Oscillator [pdf] User Guide MXH Series Components Oscillator, MXH Series, Components Oscillator, Oscillator |
