Zebra EC50/EC55 Accessories Regulatory Guide

Regulatory Information

This device is approved under Zebra Technologies Corporation.

This guide applies to the following model numbers:

• CRD-EC5X-1SCU
• CRD-EC5X-4SCO
• CRD-EC5X-4SCOL
• TRG-EC5X-SNP1
• SHARECRADLE-ME

All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.

Local language translations are available at www.zebra.com/support. Languages include English, Chinese (中文), Korean (한국), Turkish (Türkçe), Portuguese (Brasil), and many others.

Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user's authority to operate the equipment.

Declared maximum operating temperature: 40°C.

For use only with Zebra approved and UL Listed mobile devices, Zebra approved, and UL Listed/Recognized battery packs.

Note: Not sold or serviced outside of China (不在中国之外销售服务和使用).

Regulatory Markings

Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DoC is available at: www.zebra.com/doc.

Health and Safety Recommendations

Ergonomic Recommendations

In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.

Power Supply

⚠️

WARNING ELECTRICAL SHOCK:

Marking and European Economic Area (EEA)

Statement of Compliance

Zebra hereby declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at: www.zebra.com/doc.

[CE mark]

Waste Electrical and Electronic Equipment (WEEE)

For EU Customers: For products at the end of their life, please refer to recycling/disposal advice at: www.zebra.com/weee.

♻️ [WEEE symbol]

United States and Canada Regulatory

Radio Frequency Interference Notices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense.

Radio Frequency Interference Requirements – Canada

Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-3 ([B])/NMB-3([B]).

Other Regional Compliance

Brasil

Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas devidamente autorizados.

China

Product manuals supporting local languages can be downloaded by visiting www.zebra.com/support.

If using an external power adapter, ensure it has CCC certification [CCC certification mark].

India

Text sending and receiving is supported in the following Indian languages: Assamese, Bengali, Gujarati, Hindi, Kannada, Kashmiri, Konkani, Malayalam, Manipuri, Marathi, Nepali, Oriya, Punjabi, Sanskrit, Sindhi, Tamil, Telugu, Urdu, Bodo, Santhali, Maithili, and Dogri.

Korea

Electromagnetic Wave Absorption Rate (전자파흡수율).

Turkey

WEEE Compliance Statement: Complies with WEEE Regulation (TÜRK WEEE Uyumluluk Beyanı EEE Yönetmeliğine Uygundur).

Hazardous Substances Table

Name and Content of Hazardous Substances in Products (产品中有害物质的名称及含量)

Notes: Table compiled according to SJ/T 11364. 'O' indicates the content of the hazardous substance in all homogeneous materials of the part is below the limit requirement specified in GB/T 26572. 'X' indicates that the content of the hazardous substance in at least one homogeneous material of the part exceeds the limit requirement specified in GB/T 26572.

Eurasian Customs Union (EAC)

This product complies with EAC mark requirements (Данный продукт соответствует требованиям знака ЕАС).

EAC

Warranty

For the complete Zebra hardware product warranty statement, go to: zebra.com\warranty.

Service Information

Before you use the unit, it must be configured to operate in your facility's network and run your applications.

If you have a problem running your unit or using your equipment, contact your facility's Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com\support.

For the latest version of the guide, go to: zebra.com\support.

Software Support

Zebra ensures customers have the latest entitled software for peak performance. To confirm your device has the latest software, visit www.zebra.com/support.

Check for the latest software from Support > Products, or search for the device and select Support > Software Downloads.

If your device does not have the latest entitled software as of your purchase date, email Zebra at entitlementservices@zebra.com and include:

• Model number
• Serial number
• Proof of purchase
• Title of the software download requested.

If entitled, you will receive an email with a link to download the appropriate software.

Additional Information

For information on using the EC50/EC55 accessories, refer to the product guide available at: www.zebra.com/support.