GODIYMODULES 4 Bit 0.36 inch Mini Digital Voltmeter User Manual

1. ആമുഖം

This manual provides detailed instructions for the installation, operation, and maintenance of the GODIYMODULES 4 Bit 0.36 inch Mini Digital Voltmeter. This device is designed for accurate DC voltage measurement within a range of 0.000V to 100.0V. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. ഉൽപ്പന്ന സവിശേഷതകൾ

• ഹൈ പ്രിസിഷൻ വോള്യംtagഇ അളവ്.
• Clear 0.36 inch 4-digit LED display.
• Compact size for easy integration into various projects.
• വിശാലമായ പ്രവർത്തന വോളിയംtagഇ ശ്രേണി (4-30V DC).
• Fast refresh rate of 3 times per second.

3. പാക്കേജ് ഉള്ളടക്കം

ഓരോ പാക്കേജിലും ഇനിപ്പറയുന്ന ഇനങ്ങൾ അടങ്ങിയിരിക്കുന്നു:

• 3 x Mini Digital Voltmeters (1 Red, 1 Green, 1 Blue LED display)

Image 3.1: Three mini digital voltmeters included in the package, featuring red, green, and blue LED displays.

4 സ്പെസിഫിക്കേഷനുകൾ

Image 4.1: Detailed dimensions of the voltmeter module and its wiring diagram.

5. സജ്ജീകരണവും വയറിംഗും

The voltmeter features a 3-wire connection system. Proper wiring is crucial for correct operation and to prevent damage to the device.

5.1 Wire Definitions

• റെഡ് വയർ: Working Power Positive (Connect to the positive terminal of the power supply for the voltmeter itself, typically 4-30V DC).
• ബ്ലാക്ക് വയർ: Common Negative (Connect to the negative terminal of both the working power supply and the circuit being measured).
• നീല വയർ: Test Power Positive (Connect to the positive terminal of the voltage source you wish to measure, 0-100V DC).

5.2 വയറിംഗ് ഡയഗ്രം

Refer to the diagram below for correct wiring connections:

Image 5.1: Wiring diagram illustrating the connection of the red, black, and blue wires to the meter power and test power sources.

പ്രധാനപ്പെട്ടത്: പ്രവർത്തന വോള്യം ഉറപ്പാക്കുകtage for the voltmeter (Red and Black wires) is within the 4-30V DC range. The voltage being measured (Blue and Black wires) can be up to 100V DC. Connect the black wire to the common ground of both power sources if they are separate.

5.3 Calibration Fine-Tuning

The voltmeter includes a calibration fine-tuning potentiometer on the PCB. If minor adjustments to the reading accuracy are required, use a small screwdriver to carefully turn the potentiometer. This should only be done if you have a known accurate voltage reference for comparison.

ചിത്രം 5.2: View of the voltmeter's circuit board, highlighting the calibration fine-tuning component.

6. ഓപ്പറേഷൻ

Once properly wired and powered, the voltmeter will automatically display the measured DC voltage on its 4-digit LED screen. No further user interaction is typically required for basic voltagഇ നിരീക്ഷണം.

• ഡിസ്പ്ലേ വോളിയം കാണിക്കുംtage in Volts (V) with three decimal places for precision (e.g., 12.345V).
• Ensure the measured voltage does not exceed 100.0V DC to prevent damage.

ചിത്രം 6.1: ഉദാamples of the voltmeter in operation, displaying readings with red, green, and blue LED colors.

7. പ്രശ്‌നപരിഹാരം

• ഡിസ്പ്ലേ ഇല്ല:
  • Check if the working power supply (Red and Black wires) is connected correctly and providing 4-30V DC.
  • Ensure the black wire is properly connected to the negative terminal.
  • Verify that the power supply is active.
• Incorrect Reading:
  • Confirm that the blue wire is connected to the correct positive terminal of the voltage source being measured.
  • Ensure the black wire is common to both the meter's power and the measured voltagഇ ഉറവിടം.
  • If a slight offset is observed, use the calibration fine-tuning potentiometer (refer to Section 5.3) with a known accurate reference.
  • Verify the measured voltage 0-100V DC പരിധിയിലാണ്.
• മിന്നുന്ന ഡിസ്പ്ലേ:
  • Check for unstable power supply to the voltmeter (Red and Black wires).
  • Ensure connections are secure and free from intermittent contact.

8. പരിപാലനം

The GODIYMODULES Mini Digital Voltmeter is designed for low maintenance. Follow these guidelines to ensure longevity:

• ഉപകരണം വൃത്തിയായും പൊടിയിൽ നിന്നും ഈർപ്പത്തിൽ നിന്നും മുക്തമായും സൂക്ഷിക്കുക.
• Avoid exposing the voltmeter to extreme temperatures or direct sunlight.
• Do not apply excessive force to the wires or the PCB.
• ഉപയോഗത്തിലില്ലാത്തപ്പോൾ വരണ്ടതും തണുത്തതുമായ അന്തരീക്ഷത്തിൽ സൂക്ഷിക്കുക.

9. വാറൻ്റിയും പിന്തുണയും

For warranty information or technical support, please contact your retailer or the manufacturer, GODIYMODULES. Keep your purchase receipt as proof of purchase.

Manufacturer: GODIYMODULES

Part Number: 4Bit-036-001