JIARUIXIN CSR-12T-1B 12V 2.4G Bluetooth Remote Control and Receiver Kit Instruction Manual

1. ആമുഖം

This manual provides instructions for the installation, operation, and maintenance of the JIARUIXIN CSR-12T-1B 12V 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for children's electric riding cars, enabling remote control functionality.

1.1. ഉൽപ്പന്ന അനുയോജ്യത

To ensure compatibility, open your electric ride-on car and visually inspect the existing control box. If the appearance of the control box matches the CSR-12T-1B model shown in this manual, this replacement part should be compatible with your vehicle. Pay close attention to the connectors to ensure they match your car's wiring harness.

ചിത്രം 1: മുകളിൽ view of the CSR-12T-1B 12V Control Box. This image displays the main control unit with its identification label, operating voltage (DC12V), and maximum working current (25A MAX).

ചിത്രം 2: കോണാകൃതിയിലുള്ളത് view of the CSR-12T-1B 12V Control Box. This perspective highlights the various connectors for wiring into the electric riding car's system.

1.2. പാക്കേജ് ഉള്ളടക്കം

പാക്കേജിൽ സാധാരണയായി ഉൾപ്പെടുന്നു:

• 1 x CSR-12T-1B 12V Control Box
• 1 x 2.4G Bluetooth Remote Control

2. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും

Installation of the control box requires basic electrical knowledge and careful attention to wiring. If you are unsure, consult a qualified technician.

2.1. Control Box Installation

1. സുരക്ഷ ആദ്യം: Disconnect the battery from the electric riding car before beginning any installation.
2. Locate Existing Control Box: Open the body of the electric riding car to access the existing control box.
3. വയറിംഗ് വിച്ഛേദിക്കുക: Carefully disconnect all wiring harnesses from the old control box. Note the position of each connector if possible, or take photos for reference.
4. Remove Old Control Box: Unmount the old control box from its position.
5. Install New Control Box: Mount the new CSR-12T-1B control box in the same location.
6. വയറിംഗ് ബന്ധിപ്പിക്കുക: Reconnect all wiring harnesses to the new control box. Ensure all connections are secure and match the original configuration.
7. ബാറ്ററി വീണ്ടും ബന്ധിപ്പിക്കുക: Once all connections are secure, reconnect the car's battery.

2.2. Remote Control Pairing (Frequency Matching)

The remote control must be paired with the receiver kit for the first use or after replacing the remote control's batteries.

1. പവർ ഓൺ കാർ: Turn on the electric riding car.
2. ജോടിയാക്കൽ ആരംഭിക്കുക: Press and hold the "M" button (or similar pairing button, if present) on the remote control for approximately 3-5 seconds. The indicator light on the remote control should start flashing.
3. Observe Car: The car's lights or other indicators may flash or make a sound to confirm successful pairing.
4. ടെസ്റ്റ് പ്രവർത്തനം: Release the button and test the remote control's functions (forward, backward, turning) to ensure it is paired correctly.

3. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

The 2.4G Bluetooth remote control allows parents to safely operate the electric riding car. Familiarize yourself with the button functions:

Figure 3: JIARUIXIN 2.4G Bluetooth Remote Control. This image shows the remote control with all its buttons clearly labeled for their respective functions.

• ഫോർവേഡ് ബട്ടൺ: കാർ മുന്നോട്ട് നീക്കുന്നു.
• ബാക്ക് ബട്ടൺ: കാർ പിന്നിലേക്ക് നീക്കുന്നു.
• Turn Left Button: Steers the car to the left.
• Turn Right Button: Steers the car to the right.
• Speed Selection Button (S): Adjusts the speed of the car (e.g., low, medium, high). Press to cycle through available speeds.
• Emergency Braking Button (P): Immediately stops the car. Pressing this button will override other commands and bring the car to a halt.

ചിത്രം 4: മുകളിൽ view of the JIARUIXIN 2.4G Bluetooth Remote Control. This image provides a clear view of the remote's ergonomic design and button layout.

4. പരിപാലനം

Proper maintenance ensures the longevity and reliable operation of your control kit.

• വൃത്തിയാക്കൽ: Wipe the control box and remote control with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
• സംഭരണം: Store the components in a dry place, away from direct sunlight and extreme temperatures.
• ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ (റിമോട്ട് കൺട്രോൾ): If the remote control's range decreases or it becomes unresponsive, replace its batteries. Refer to the remote control's battery compartment for the correct battery type and orientation.
• വയറിംഗ് പരിശോധന: Periodically check all wiring connections to the control box for any signs of wear, corrosion, or looseness. Ensure they are securely fastened.

5. പ്രശ്‌നപരിഹാരം

If you encounter issues with your CSR-12T-1B kit, refer to the following common troubleshooting steps:

• റിമോട്ട് കൺട്രോൾ പ്രതികരിക്കുന്നില്ല:
  • Ensure the electric riding car is powered on.
  • Check the remote control's batteries and replace them if necessary.
  • Perform the remote control pairing (frequency matching) procedure again as described in Section 2.2.
  • Ensure there are no obstructions or strong interference sources between the remote control and the car.
• കാർ നീങ്ങുന്നില്ല:
  • Verify the car's main power switch is ON.
  • Check the car's battery charge level.
  • Ensure all wiring connections to the control box are secure.
  • Confirm the remote control is paired correctly.
• ഇടയ്ക്കിടെയുള്ള പ്രവർത്തനം:
  • അയഞ്ഞ വയറിംഗ് കണക്ഷനുകൾ പരിശോധിക്കുക.
  • Ensure the remote control batteries are not low.
  • Avoid operating near other 2.4Ghz devices that might cause interference.

If problems persist after following these steps, contact customer support.

6 സ്പെസിഫിക്കേഷനുകൾ

7. വാറൻ്റിയും പിന്തുണയും

Specific warranty information for this product is not provided in the available documentation. For warranty claims or technical support, please contact the seller or manufacturer directly through the platform where the product was purchased.

Manufacturer: JIARUIXIN