1. ആമുഖം
The Progenion PR-450C is a quiet, versatile, and professional air purifier equipped with advanced air purification technology and modern sensor capabilities. Designed to provide clean air, this powerful device offers a solution for various indoor environments, including living rooms, bedrooms, offices, smoking areas, bird rooms, and waiting rooms. This manual provides essential information for the safe and effective operation and maintenance of your air purifier.
2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ
ഉപകരണം ഉപയോഗിക്കുന്നതിന് മുമ്പ് എല്ലാ സുരക്ഷാ നിർദ്ദേശങ്ങളും ശ്രദ്ധാപൂർവ്വം വായിക്കുക. ഈ നിർദ്ദേശങ്ങൾ പാലിക്കുന്നതിൽ പരാജയപ്പെടുന്നത് വൈദ്യുതാഘാതം, തീപിടുത്തം അല്ലെങ്കിൽ ഗുരുതരമായ പരിക്കിന് കാരണമായേക്കാം.
- Always ensure the power cord is fully inserted into the outlet.
- കേടായ ചരടോ പ്ലഗോ ഉപയോഗിച്ച് ഉപകരണം പ്രവർത്തിപ്പിക്കരുത്.
- എയർ പ്യൂരിഫയർ വെള്ളത്തിൽ നിന്നോ മറ്റ് ദ്രാവകങ്ങളിൽ നിന്നോ അകറ്റി നിർത്തുക.
- എയർ ഇൻലെറ്റുകൾ അല്ലെങ്കിൽ ഔട്ട്ലെറ്റുകൾ തടയരുത്.
- വൃത്തിയാക്കുന്നതിനോ അറ്റകുറ്റപ്പണികൾ നടത്തുന്നതിനോ മുമ്പ് ഉപകരണം അൺപ്ലഗ് ചെയ്യുക.
- ശാരീരികമോ ഇന്ദ്രിയപരമോ മാനസികമോ ആയ കഴിവുകൾ കുറവുള്ള വ്യക്തികൾ (കുട്ടികൾ ഉൾപ്പെടെ) അല്ലെങ്കിൽ അവരുടെ സുരക്ഷയ്ക്ക് ഉത്തരവാദിയായ ഒരു വ്യക്തി ഉപകരണത്തിൻ്റെ ഉപയോഗത്തെ സംബന്ധിച്ച മേൽനോട്ടമോ നിർദ്ദേശമോ നൽകിയിട്ടില്ലെങ്കിൽ, ഈ ഉപകരണം ഉപയോഗിക്കാൻ ഉദ്ദേശിച്ചുള്ളതല്ല. .
- Do not use the appliance in environments with flammable or explosive gases.
3. ഉൽപ്പന്നം കഴിഞ്ഞുview
Familiarize yourself with the components of your Progenion PR-450C air purifier.

ചിത്രം 3.1: ഫ്രണ്ട് view of the Progenion PR-450C Air Purifier.

ചിത്രം 3.2: വശം view of the Progenion PR-450C Air Purifier.
3.1. നിയന്ത്രണ പാനൽ
The main control panel is located on the front of the unit, featuring intuitive touch buttons and an air quality indicator bar.
3.2. റിമോട്ട് കൺട്രോൾ
The device can also be operated using the included remote control.

ചിത്രം 3.3: Remote control for the PR-450C Air Purifier.
4. സജ്ജീകരണം
- അൺപാക്ക് ചെയ്യുന്നു: Carefully remove the air purifier from its packaging. Retain the packaging for future storage or transport.
- പ്ലേസ്മെൻ്റ്: Place the air purifier on a flat, stable surface. Ensure there is adequate space (at least 20 cm) around the air inlets and outlets for optimal airflow. Avoid placing it near heat sources or in direct sunlight.
- ഇൻസ്റ്റാളേഷൻ ഫിൽട്ടർ ചെയ്യുക: The filters are typically pre-installed but may have protective packaging. Open the filter compartment (usually at the back or side) and remove any plastic wrapping from the HEPA, ULPA, and Active-Carbon filters. Reinsert them correctly according to the markings.
- പവർ കണക്ഷൻ: ഒരു സാധാരണ ഇലക്ട്രിക്കൽ ഔട്ട്ലെറ്റിലേക്ക് പവർ കോർഡ് പ്ലഗ് ചെയ്യുക.
5. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Progenion PR-450C offers both manual and automatic operation modes.
5.1. പവർ ഓൺ/ഓഫ്
അമർത്തുക പവർ യൂണിറ്റ് ഓണാക്കാനോ ഓഫാക്കാനോ കൺട്രോൾ പാനലിലോ റിമോട്ട് കൺട്രോളിലോ ഉള്ള ബട്ടൺ.
5.2. Sensor Mode (Automatic Operation)
അമർത്തുക സെൻസർ button to activate sensor technology. An air quality measurement will begin, lasting approximately 5 minutes, during which the indicator bar will be red. Once the measurement is complete, the indicator bar will turn blue, indicating that sensor technology is active. The device will then automatically adjust ventilation levels based on the detected air quality.
5.3. Manual Mode and Timer
അമർത്തുക മോഡ് button to switch between different operating modes, including manual mode and timer mode. In manual mode, you can control settings independently.
5.4. ഫാൻ സ്പീഡ് നിയന്ത്രണം
അമർത്തുക വേഗത button to select from 3 different fan speeds. Note: This function is not active when sensor mode is enabled.
5.5. Anion / Ionizer Function
അമർത്തുക ANION / IONIZER button to switch the open ionization function on or off. The 4 ionization brushes, located at the upper rear of the device, produce millions of negative ions to neutralize airborne viruses and bacteria.

ചിത്രം 5.1: Illustration of negative ion release for air purification.
5.6. Static / Electrostatic Filter Function
അമർത്തുക STATIC / ELECTROSTATIC FILTER button to switch this section on or off. This filter captures coarse dust particles and ionizes passing air, neutralizing airborne virus particles and bacteria. This filter does not require replacement.

ചിത്രം 5.2: Illustration of the electrostatic filter in action.
5.7. UV-C Lamp ഫംഗ്ഷൻ
അമർത്തുക UV-LIGHT / UV-C Lamp button to switch the UV-C lamp on or off. When activated, passing air is exposed to UV-C light, which neutralizes airborne virus particles and bacteria.

ചിത്രം 5.3: Illustration of the UV-C lamp neutralizing microorganisms.
6. പരിപാലനം
പതിവ് അറ്റകുറ്റപ്പണികൾ മികച്ച പ്രകടനം ഉറപ്പാക്കുകയും നിങ്ങളുടെ എയർ പ്യൂരിഫയറിന്റെ ആയുസ്സ് വർദ്ധിപ്പിക്കുകയും ചെയ്യുന്നു.
6.1. Electrostatic Filter Cleaning
The electrostatic filter does not require replacement. Clean it once a week using a vacuum cleaner with a brush attachment and a slightly damp cloth to remove accumulated dust and particles.
6.2. HEPA/ULPA and Active-Carbon Filter Replacement
The HEPA/ULPA and Active-Carbon filters have a limited lifespan and will need to be replaced periodically. The frequency depends on usage and air quality. Refer to the indicator on the control panel or consult the manufacturer's guidelines for replacement intervals. Always use genuine Progenion replacement filters.
6.3 ജനറൽ ക്ലീനിംഗ്
Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
7. പ്രശ്നപരിഹാരം
നിങ്ങളുടെ എയർ പ്യൂരിഫയറിൽ പ്രശ്നങ്ങൾ നേരിടുകയാണെങ്കിൽ, ഇനിപ്പറയുന്ന പൊതുവായ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും പരിശോധിക്കുക:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| യൂണിറ്റ് ഓണാക്കുന്നില്ല | No power; power cord not connected; power outlet malfunction. | Check power cord connection; try a different outlet; ensure power switch is on. |
| ദുർബലമായ വായുപ്രവാഹം | ഫിൽട്ടറുകൾ വൃത്തിഹീനമോ അടഞ്ഞതോ ആണ്; എയർ ഇൻലെറ്റുകൾ/ഔട്ട്ലെറ്റുകൾ അടഞ്ഞിരിക്കുന്നു. | Clean or replace filters; ensure no obstructions around the unit. |
| അസാധാരണമായ ശബ്ദം | Foreign object inside; unit not on a stable surface; fan issue. | Turn off and unplug, check for foreign objects; place on a stable surface. If noise persists, contact support. |
| Air quality indicator always red/poor | Sensor is dirty; genuinely poor air quality. | Clean the air quality sensor (refer to maintenance section); allow unit to run longer in sensor mode. |
If the problem persists after attempting these solutions, please contact Progenion customer support.
8 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | പിആർ-450സി |
| ഫിൽട്ടർ തരം | HEPA, ULPA, Active-Carbon, Electrostatic |
| കവറേജ് ഏരിയ | 80 m² വരെ |
| Ionizer Output | 8,000,000 അയോണുകൾ/സെ.മീ |
| യുവി-സി എൽamp ജീവിതം | Approx. 6000 operating hours |
| അളവുകൾ (H x W x D) | 58.5 x 45 x 23.7 സെ.മീ |
| പരമാവധി വൈദ്യുതി ഉപഭോഗം | 55 W |
| Minimum Power Consumption (Night Mode) | 35 W |
| ഭാരം | 10.5 കി.ഗ്രാം |
| ശബ്ദ നില | 55 ഡിബി വരെ |
| നിയന്ത്രണ രീതി | ടച്ച് പാനൽ, റിമോട്ട് കൺട്രോൾ |
| സർട്ടിഫിക്കേഷനുകൾ | CE |
9. വാറൻ്റിയും പിന്തുണയും
Progenion products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or visit the official Progenion website. For technical support, replacement parts, or service inquiries, please contact Progenion customer service through their official channels.