Einhell TE-MA 1700 Wall Chaser Instruction Manual

1. ആമുഖം

The Einhell TE-MA 1700 wall chaser is designed for cutting horizontal and vertical grooves and channels in masonry, primarily for laying pipes and cables. This tool facilitates precise cutting operations on hard materials, offering an efficient alternative to manual methods. Its 1700 W motor drives two parallel cutting discs, enabling accurate groove creation. The tool features continuous adjustment of cutting depth and individual width adjustment for various groove sizes. Safety features include soft start and overload protection. A guide roller and auxiliary handle provide a secure grip for controlled use. The spindle lock system simplifies disc changes. An adapter is included for connecting a wet/dry vacuum cleaner to reduce dust during operation. The 4-meter power cable provides a flexible working range. The product is supplied with a transport case and four diamond cutting discs.

2. സുരക്ഷാ നിർദ്ദേശങ്ങൾ

Always observe general safety regulations when operating power tools. Read and understand all instructions before use. Keep this manual for future reference.

• വ്യക്തിഗത സംരക്ഷണ ഉപകരണങ്ങൾ: Always wear safety goggles, hearing protection, a dust mask, and work gloves when operating the wall chaser.
• ജോലി ഏരിയ: Ensure the work area is clean, well-lit, and free from obstructions. Keep bystanders and children away.
• ഇലക്ട്രിക്കൽ സുരക്ഷ: Ensure the power supply matches the tool's specifications. Do not use the tool in damp or wet conditions. Avoid damaging the power cable.
• ടൂൾ കൈകാര്യം ചെയ്യൽ: Maintain a firm grip on the tool with both hands. Do not overreach. Ensure stable footing.
• ഡിസ്ക് സുരക്ഷ: Only use cutting discs specified for this tool. Ensure discs are correctly installed and tightened before operation. Inspect discs for damage before each use.
• പൊടി മാനേജ്മെന്റ്: Connect a suitable dust extraction system to minimize dust exposure.
• ഓവർലോഡ് സംരക്ഷണം: The tool is equipped with overload protection. If the tool stops due to overload, release the trigger and allow it to cool before resuming operation.
• സോഫ്റ്റ് തുടക്കം: The soft start feature ensures a gradual increase in speed, reducing kickback and improving control.
• പരിപാലനം: Disconnect the tool from the power supply before making any adjustments, changing accessories, or performing maintenance.

3. ഉൽപ്പന്നം കഴിഞ്ഞുview

Familiarize yourself with the components of your Einhell TE-MA 1700 Wall Chaser.

ചിത്രം 3.1: മുൻഭാഗം view of the Einhell TE-MA 1700 Wall Chaser.

ഉൾപ്പെടുത്തിയ ഘടകങ്ങൾ:

• Einhell TE-MA 1700 Wall Chaser
• 1 ഹെക്സ് കീ
• 1 Transport Case
• 4 Diamond Cutting Discs (Ø 150 mm)

Figure 3.2: The wall chaser with its transport bag, diamond cutting discs, and hex key.

പ്രധാന സവിശേഷതകൾ:

• Adjustable Cutting Depth: The cutting depth can be continuously adjusted up to 40 mm.
• Adjustable Cutting Width: The cutting width can be individually set up to 38 mm.
• സ്പിൻഡിൽ ലോക്ക്: Facilitates easy and secure changing of cutting discs.
• Dust Extraction Adapter: For connection to a vacuum cleaner to maintain a clean work environment.
• സോഫ്റ്റ് തുടക്കം: Ensures a smooth start-up of the motor.
• ഓവർലോഡ് സംരക്ഷണം: അമിതമായ ലോഡ് മൂലമുണ്ടാകുന്ന കേടുപാടുകളിൽ നിന്ന് മോട്ടോറിനെ സംരക്ഷിക്കുന്നു.
• Guide Roller and Auxiliary Handle: Provide enhanced control and comfortable handling.

4. സജ്ജീകരണം

4.1. Installing Cutting Discs

1. ഉപകരണം വൈദ്യുതി വിതരണത്തിൽ നിന്ന് വിച്ഛേദിക്കപ്പെട്ടിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
2. സ്പിൻഡിൽ ലോക്ക് ബട്ടൺ അമർത്തിപ്പിടിക്കുക.
3. Use the hex key to loosen the clamping nut and remove the outer flange.
4. Place the diamond cutting discs onto the spindle, ensuring the rotation direction arrows on the discs match the arrow on the tool. For two discs, place a spacer between them.
5. Reinstall the outer flange and tighten the clamping nut securely with the hex key while holding the spindle lock button.

Figure 4.1: Spindle lock button for disc changes.

4.2. Adjusting Cutting Depth

The cutting depth can be adjusted continuously to suit your application.

1. ഡെപ്ത് അഡ്ജസ്റ്റ്മെന്റ് നോബ് അഴിക്കുക.
2. Move the guide plate to the desired depth indicated on the scale (up to 40 mm).
3. Tighten the depth adjustment knob firmly to secure the setting.

Figure 4.2: Cutting depth adjustment mechanism.

4.3. Adjusting Cutting Width

The cutting width can be adjusted by adding or removing spacers between the cutting discs.

1. Follow the steps for installing cutting discs (Section 4.1).
2. Insert or remove spacers as needed to achieve the desired cutting width (up to 38 mm).
3. Ensure all components are securely tightened before operation.

4.4. പൊടി വേർതിരിച്ചെടുക്കൽ ബന്ധിപ്പിക്കൽ

For a cleaner work environment and improved visibility, connect a wet/dry vacuum cleaner to the dust extraction adapter.

1. Attach the hose of a suitable wet/dry vacuum cleaner to the dust extraction port on the wall chaser.
2. Ensure the connection is secure to prevent dust leakage.

Figure 4.3: Dust extraction connection.

5. ഓപ്പറേഷൻ

5.1. ടൂൾ ആരംഭിക്കുന്നു

After ensuring all safety precautions are met and the setup is complete:

1. Connect the tool to a suitable power outlet.
2. രണ്ട് കൈകളാലും ഉപകരണം മുറുകെ പിടിക്കുക.
3. Press the ON/OFF switch. The soft start feature will gradually bring the discs to full speed.

5.2. കട്ടിംഗ് ടെക്നിക്

The Einhell TE-MA 1700 is designed for a pulling cut motion.

1. Position the tool with the guide plate flat against the workpiece.
2. Engage the power switch.
3. Slowly guide the tool along the desired cutting line, pulling it towards you. Apply steady, even pressure.
4. Avoid forcing the tool, as this can trigger the overload protection.
5. For deeper channels, multiple passes may be required.
6. After cutting, the material between the two grooves can be removed using a hammer drill or chisel.

Figure 5.1: Proper operation of the wall chaser.

5.3. Working on Different Materials

This wall chaser is suitable for masonry materials. Always ensure the diamond cutting discs are appropriate for the specific material being cut.

6. പരിപാലനം

Regular maintenance ensures the longevity and performance of your tool. Always disconnect the power plug before any maintenance work.

6.1. വൃത്തിയാക്കൽ

• After each use, clean the tool thoroughly, especially the ventilation slots and the area around the cutting discs.
• Use a brush or compressed air to remove dust and debris. Do not use water or chemical cleaning agents.
• Ensure the dust extraction port is clear of blockages.

6.2. Disc Replacement

Replace cutting discs when they become worn or damaged. Refer to Section 4.1 for disc installation instructions.

6.3. സംഭരണം

• Store the wall chaser in its transport case in a dry, secure place, out of reach of children.
• Ensure the tool is clean and free of debris before storage.

7. പ്രശ്‌നപരിഹാരം

8 സ്പെസിഫിക്കേഷനുകൾ

9. വാറൻ്റിയും പിന്തുണയും

This Einhell product comes with a limited or full warranty, as specified at the time of purchase. Spare parts are available for a period of 1 year.

For warranty claims, technical assistance, or spare parts, please contact Einhell customer support or your authorized dealer. Keep your proof of purchase for warranty validation.

For more information, visit the official Einhell webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ ഉൽപ്പന്ന പാക്കേജിംഗിനൊപ്പം നൽകിയിരിക്കുന്ന കോൺടാക്റ്റ് വിശദാംശങ്ങൾ പരിശോധിക്കുക.