ആമുഖം
Thank you for choosing the Kohler Bardon Touchless Wall-Mount Soap Dispenser. This manual provides essential information for the proper installation, operation, and maintenance of your new soap dispenser. Please read these instructions carefully before installation and keep them for future reference.
Image: Kohler Bardon Touchless Wall-Mount Soap Dispenser. This image shows the sleek, modern design of the dispenser mounted on a wall, highlighting its polished chrome finish.
പാക്കേജ് ഉള്ളടക്കം
- 1 x Kohler Bardon Touchless Wall-Mount Soap Dispenser
- 1 x ഇൻസ്റ്റലേഷൻ ഇൻസ്ട്രക്ഷൻ മാനുവൽ
- 1 x വാറൻ്റി കാർഡ്
സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
Proper installation is crucial for the optimal performance of your touchless soap dispenser. Refer to the included installation instruction manual for detailed, step-by-step guidance.
- തയ്യാറാക്കൽ: Ensure the installation area is clean, dry, and free from obstructions. Gather necessary tools (e.g., drill, screwdriver, level).
- മൗണ്ടിംഗ് ലൊക്കേഷൻ: Select a suitable wall location, ensuring adequate clearance for operation and refilling. Avoid mounting directly above electrical outlets or in areas prone to excessive splashing.
- ഡ്രില്ലിംഗ്: Mark the drilling points accurately using the provided template (if applicable). Drill holes according to the instructions.
- സുരക്ഷിത മൗണ്ടിംഗ്: Attach the mounting bracket to the wall using appropriate fasteners. Secure the dispenser to the mounting bracket.
- ബാറ്ററി ഇൻസ്റ്റാളേഷൻ: Open the battery compartment, insert the required batteries (typically AA or AAA, not included) according to polarity markings. Close the compartment securely.
- ഡിസ്പെൻസർ പൂരിപ്പിക്കൽ: Open the soap reservoir cap. Pour liquid soap into the reservoir, ensuring not to overfill. Close the cap tightly.
- പ്രാരംഭ പരിശോധന: Activate the dispenser a few times to prime the pump and ensure proper soap dispensing.
Note: For detailed diagrams and specific mounting hardware, consult the dedicated installation instruction sheet provided in the package.
പ്രവർത്തന നിർദ്ദേശങ്ങൾ
The Kohler Bardon Touchless Soap Dispenser is designed for hygienic and convenient use.
- സജീവമാക്കൽ: Place your hand approximately 2-5 cm (1-2 inches) below the sensor located at the bottom of the dispenser.
- Soap Dispensing: The sensor will detect your hand, and a measured amount of soap will be dispensed automatically.
- Multiple Dispenses: If more soap is desired, remove your hand and place it under the sensor again.
- സെൻസർ സെൻസിറ്റിവിറ്റി: Ensure the sensor area is clear of obstructions and direct sunlight, which can interfere with operation.
പരിപാലനവും പരിചരണവും
Regular cleaning and maintenance will ensure the longevity and optimal performance of your dispenser.
- ബാഹ്യ ശുചീകരണം: ഒരു മൃദുവായ, ഡി ഉപയോഗിച്ച് ബാഹ്യ പ്രതലങ്ങൾ തുടയ്ക്കുകamp cloth. For polished chrome finishes, use a non-abrasive cleaner specifically designed for chrome. Avoid harsh chemicals, abrasive pads, or ammonia-based cleaners, as these can damage the finish.
- സെൻസർ ക്ലീനിംഗ്: Gently wipe the sensor window with a soft, dry cloth to remove any soap residue or dust that might obstruct its function.
- Refilling Soap: Refill the soap reservoir when the soap level is low. Avoid mixing different types of soap, as this can lead to clogging.
- ബാറ്ററി മാറ്റിസ്ഥാപിക്കൽ: Replace batteries when the dispenser stops responding or the indicator light (if present) signals low power. Always replace all batteries at once with new ones of the same type.
- ദീർഘകാല സംഭരണം: If the dispenser will not be used for an extended period, empty the soap reservoir and remove the batteries to prevent leakage and corrosion.
The KOHLER Life-Bright finish is designed to last 2 times longer than industry durability standards, strengthened with 3 layers of coating. Proper care will help maintain this finish.
ട്രബിൾഷൂട്ടിംഗ്
If you encounter issues with your soap dispenser, refer to the following common problems and solutions:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| Dispenser does not activate. |
|
|
| സോപ്പ് സാവധാനത്തിലോ സ്ഥിരതയില്ലാതെയോ വിതരണം ചെയ്യുന്നു. |
|
|
| Dispenser drips after use. |
|
|
സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | വിശദാംശങ്ങൾ |
|---|---|
| മോഡൽ നമ്പർ | 5487K-CP |
| ബ്രാൻഡ് | കോഹ്ലർ |
| നിറം | മിനുക്കിയ Chrome ഫിനിഷ് |
| മെറ്റീരിയൽ | ലോഹം |
| ഉൽപ്പന്ന അളവുകൾ | 18L x 32W x 15H സെൻ്റീമീറ്റർ |
| മെറ്റീരിയൽ തരം സൗജന്യം | ലീഡ് ഫ്രീ |
| ഇനത്തിൻ്റെ ഭാരം | 1 കിലോ 110 ഗ്രാം |
| നിർമ്മാണം | Solid Metal Construction for Durability and Reliability |
| ഫിനിഷ് ഡ്യൂറബിലിറ്റി | KOHLER Life-Bright (2x industry standard, 3 layers of coating) |
വാറൻ്റി വിവരങ്ങൾ
This Kohler Bardon Touchless Wall-Mount Soap Dispenser comes with a 10 വർഷത്തെ വാറൻ്റി. Please refer to the included warranty card for full terms and conditions, including coverage details, limitations, and how to make a claim. Keep your proof of purchase for warranty validation.
ഉപഭോക്തൃ പിന്തുണ
For further assistance, technical support, or to inquire about replacement parts, please contact Kohler customer service. You can find contact details on the Kohler official webസൈറ്റ് അല്ലെങ്കിൽ നിങ്ങളുടെ വാറന്റി കാർഡിൽ.
നിർമ്മാതാവ്: കോഹ്ലർ
ഇറക്കുമതിക്കാരൻ: KOHLER INDIA CORPORATION PRIVATE LIMITED, 26 A, RING ROAD, LAJPAT NAGAR-IV, NEW DELHI-110024
Visit the official Kohler Store for more products and information: Kohler Store on Amazon.in