Intex 28426 Bubble Spa Set User Manual

1. ഉൽപ്പന്നം കഴിഞ്ഞുview

The Intex 28426 Bubble Spa Set offers a relaxing bubble massage experience in a durable and comfortable design. This round, beige spa measures 196 x 71 cm and has a capacity of 795 liters, comfortably seating up to 4 people. It features patented air chamber technology for enhanced stability and user comfort, along with a powerful pool pump with a capacity of 1741 l/h to ensure clean and circulating water.

Image: The Intex 28426 Bubble Spa Set in use, showing its round shape and beige exterior.

2 സുരക്ഷാ വിവരങ്ങൾ

Please read and understand all safety warnings and instructions before installing and using this product. Failure to follow these instructions can result in serious injury or death.

പൊതു സുരക്ഷ

• Always supervise children and individuals with disabilities when they are in or near the spa.
• Do not use the spa if you are pregnant, have heart disease, high blood pressure, diabetes, or other health conditions without consulting a doctor.
• Avoid using the spa immediately after a heavy meal or while under the influence of alcohol or drugs.
• Maintain proper water chemistry to prevent waterborne illnesses.
• Do not dive or jump into the spa.

ഇലക്ട്രിക്കൽ സുരക്ഷ

• Connect the spa only to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI).
• ഈ ഉൽപ്പന്നം ഉപയോഗിച്ച് വിപുലീകരണ കോഡുകൾ ഉപയോഗിക്കരുത്.
• എല്ലാ ഇലക്ട്രിക്കൽ ഉപകരണങ്ങളും സ്പായിൽ നിന്ന് മാറ്റി സൂക്ഷിക്കുക.
• Ensure hands are dry when plugging or unplugging the unit.

3. സജ്ജീകരണ നിർദ്ദേശങ്ങൾ

3.1 സൈറ്റ് തയ്യാറാക്കൽ

• Choose a flat, level, and stable surface capable of supporting the weight of the filled spa (approximately 841 kg or 1854 lbs).
• Ensure the area is free from sharp objects, debris, or uneven ground.
• Allow sufficient space around the spa for maintenance and access. A minimum recommended space of 2.95m x 2.95m is advised.

3.2 പണപ്പെരുപ്പം

• Unfold the spa liner and place it on the prepared ground cloth.
• Connect the inflation hose from the control unit to the spa's inflation valve.
• Turn on the inflation function on the control panel. Inflate until the spa walls are firm but not rigid. Do not overinflate.
• Disconnect the hose and securely close the valve.

Image: Diagrams illustrating the spa's dimensions (1.96m diameter, 0.71m height) and the recommended minimum installation area.

3.3 സ്പാ നിറയ്ക്കൽ

• ഡ്രെയിൻ വാൽവ് തൊപ്പി സുരക്ഷിതമായി അടച്ചിട്ടുണ്ടെന്ന് ഉറപ്പാക്കുക.
• Fill the spa with fresh water using a garden hose, up to the maximum fill line indicated on the interior wall.
• ഓവർഫിൽ ചെയ്യരുത്.

4. പ്രവർത്തന നിർദ്ദേശങ്ങൾ

4.1 നിയന്ത്രണ പാനൽ പ്രവർത്തനങ്ങൾ

The control panel allows you to manage all spa functions. Familiarize yourself with the buttons and their indicators.

Image: The digital control panel of the PureSpa, showing temperature display and function buttons.

• പവർ ബട്ടൺ: Turns the spa on or off.
• താപനില ക്രമീകരണം: Use the up/down arrows to set your desired water temperature. The maximum temperature is typically 40°C (104°F).
• ബബിൾ ബട്ടൺ: Activates the bubble massage function. Press again to turn off.
• ഫിൽട്ടർ ബട്ടൺ: Turns the filtration system on or off. It is recommended to run the filter daily to maintain water clarity.
• ഹീറ്റർ ബട്ടൺ: Activates the water heating function. The heater will turn off automatically once the set temperature is reached.

4.2 Bubble Massage Function

Press the bubble button on the control panel to activate the 120 high-powered bubble jets. Enjoy the soothing massage. The bubble function will automatically shut off after 30 minutes to prevent overheating and conserve energy. You can restart it if desired.

ചിത്രം: ഒരു ക്ലോസ്-അപ്പ് view of the bubble jets creating a relaxing effect in the spa water.

5. പരിപാലനം

5.1 ജല ചികിത്സ

• Regularly test the spa water using test strips to ensure proper pH and sanitizer levels.
• Add appropriate spa chemicals as needed to maintain water balance and prevent algae growth.
• Clean or replace the filter cartridge frequently (every 1-2 weeks depending on usage) to ensure efficient filtration.

5.2 സ്പാ വൃത്തിയാക്കൽ

• Periodically clean the interior and exterior surfaces of the spa with a soft cloth and mild detergent. Rinse thoroughly.
• Avoid abrasive cleaners or brushes that could damage the vinyl material.

5.3 ഡ്രെയിനിംഗും സംഭരണവും

• To drain the spa, connect a garden hose to the drain valve and open the valve. Direct the water to a suitable drainage area.
• Once drained, wipe the interior dry.
• Deflate the spa and control unit. Ensure all components are completely dry before folding and storing in a cool, dry place, away from direct sunlight and extreme temperatures.
• Always use the provided spa cover when the spa is not in use to maintain water temperature and keep debris out.

Image: The spa cover, designed to protect the spa when not in use.

Image: The Intex spa covered and placed on a patio, ready for storage or protection.

5.4 Filter Maintenance Video

6. പ്രശ്‌നപരിഹാരം

This section addresses common issues you might encounter with your Intex Bubble Spa Set.

7 സ്പെസിഫിക്കേഷനുകൾ

8. വാറൻ്റിയും പിന്തുണയും

8.1 നിർമ്മാതാവിന്റെ വാറന്റി

This Intex Bubble Spa Set comes with a 2 വർഷത്തെ നിർമ്മാതാവിന്റെ വാറന്റി വാങ്ങിയ തീയതി മുതൽ. സാധാരണ ഉപയോഗത്തിലുള്ള മെറ്റീരിയലുകളിലെയും ജോലികളിലെയും വൈകല്യങ്ങൾ ഈ വാറന്റി ഉൾക്കൊള്ളുന്നു. വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.

8.2 ഉപഭോക്തൃ പിന്തുണ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Intex customer support. Contact information can typically be found on the product packaging or the official Intex webസൈറ്റ്.