1. ആമുഖം
Welcome to the user manual for the Nova AMP-100 2-Channel Mini Amplifier. This compact amplifier is designed to enhance the audio experience in your car or motorcycle, providing 300 watts of power across two channels. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.
2 സുരക്ഷാ വിവരങ്ങൾ
Observe the following safety precautions to prevent injury or damage to the ampലിഫയറും ബന്ധിപ്പിച്ച ഘടകങ്ങളും:
- പ്രൊഫഷണൽ ഇൻസ്റ്റാളേഷൻ ശുപാർശ ചെയ്യുന്നു: Installation of car audio equipment can be complex. If you are unsure about any part of the installation process, seek assistance from a qualified professional.
- ഊർജ്ജ സ്രോതസ്സ്: ബന്ധിപ്പിക്കുക amplifier only to a 12-14.8 Volt DC power source with a negative ground.
- വയറിംഗ്: Ensure all wiring is correctly routed and secured to prevent pinching, cutting, or short circuits. Use appropriate gauge wiring for power and ground connections.
- വെൻ്റിലേഷൻ: മൗണ്ട് ദി amplifier in a location that allows for adequate air circulation to prevent overheating. Do not cover the amplifier's heat sinks.
- ഈർപ്പം: തുറന്നുകാട്ടുന്നത് ഒഴിവാക്കുക amplifier to moisture or direct water contact.
- വോളിയം ലെവലുകൾ: ഉയർന്ന ശബ്ദത്തിൽ ദീർഘനേരം എക്സ്പോഷർ ചെയ്യുന്നത് കേൾവിക്ക് കേടുപാടുകൾ വരുത്താം. സുരക്ഷിതവും സുഖകരവുമായ തലത്തിലേക്ക് ശബ്ദം ക്രമീകരിക്കുക.
3. പാക്കേജ് ഉള്ളടക്കം
നിങ്ങളുടെ പാക്കേജിൽ ഇനിപ്പറയുന്ന ഇനങ്ങൾ അടങ്ങിയിട്ടുണ്ടെന്ന് ദയവായി പരിശോധിക്കുക:
- നോവ AMP-100 2-Channel Mini Ampജീവപര്യന്തം
- Power/Speaker Wiring Harnesses (with wafer connectors)
- മൗണ്ടിംഗ് സ്ക്രൂകൾ

Image: Nova AMP-100 മിനി Amplifier shown with its included wiring harnesses and mounting screws.
4. ഉൽപ്പന്ന സവിശേഷതകൾ
- 2-Channel 300 Watts Ampജീവപര്യന്തം
- Compact Dimensions: 3.94" L x 2.5" W x 1.6" H
- Gold Plated RCA Connectors
- Power On LED Indication
- High/Flat/Low Pass Filter Built-In
- Power & High Level Input & Speaker Output with wafer connectors
- Stereo Separation: More Than 55dB
- ഫ്രീക്വൻസി പ്രതികരണം: 20-20k Hz
- High/Low Level Input Capability
- 3-way Selectable Electronic Crossover Network
- 4 ഓം സ്റ്റീരിയോ സ്റ്റേബിൾ
- ക്രമീകരിക്കാവുന്ന നേട്ട നിയന്ത്രണം
- Anti-Thump Turn On Circuitry
- Remote Turn On/Off Functionality
- പവർ പ്രൊട്ടക്ഷൻ സർക്യൂട്ട്
- ഓപ്പറേറ്റിംഗ് വോളിയംtage: 12-14.8 Volt DC
5. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
നിങ്ങളുടെ ഉപകരണത്തിന്റെ പ്രകടനത്തിനും ദീർഘായുസ്സിനും ശരിയായ ഇൻസ്റ്റാളേഷൻ നിർണായകമാണ്. amplifier. Follow these general guidelines:
5.1 മ ing ണ്ടിംഗ് സ്ഥാനം
- Choose a dry, well-ventilated location away from direct heat sources or moisture.
- ചുറ്റും മതിയായ ഇടം ഉറപ്പാക്കുക ampവായു സഞ്ചാരത്തിനുള്ള ലൈഫയർ.
- സുരക്ഷിതമായി മൌണ്ട് ചെയ്യുക amplifier using the provided screws to prevent movement during vehicle operation.
5.2 വയറിംഗ് കണക്ഷനുകൾ
Refer to the image below for an overview യുടെ amplifier's connections. Always disconnect the vehicle's battery before making any electrical connections.

ചിത്രം: മുകളിൽ view of the Nova AMP-100 മിനി Amplifier, highlighting the power input, speaker output, and RCA input sections.
- പവർ (ബി+): Connect the main power wire from the amplifier to the positive terminal of the vehicle's battery. An in-line fuse (not included) should be installed within 18 inches of the battery.
- ഗ്രൗണ്ട് (GND): Connect the ground wire from the ampവാഹനത്തിന്റെ ചേസിസിൽ വൃത്തിയുള്ളതും പെയിന്റ് ചെയ്യാത്തതുമായ ഒരു ലോഹ പ്രതലത്തിലേക്ക് ലിഫയർ ഘടിപ്പിക്കുക. ദൃഢവും കുറഞ്ഞ പ്രതിരോധശേഷിയുള്ളതുമായ കണക്ഷൻ ഉറപ്പാക്കുക.
- റിമോട്ട് (REM): എന്നതിൽ നിന്ന് റിമോട്ട് ടേൺ-ഓൺ വയർ ബന്ധിപ്പിക്കുക amplifier to the remote output of your head unit. This wire turns the ampനിങ്ങളുടെ സ്റ്റീരിയോ ഉപയോഗിച്ച് ലൈഫയർ ഓണും ഓഫും ആക്കുക.
- ഓഡിയോ ഇൻപുട്ട് (ആർസിഎ അല്ലെങ്കിൽ ഉയർന്ന ലെവൽ):
- RCA ഇൻപുട്ട്: Use RCA cables to connect the amplifier's RCA inputs to the RCA outputs of your head unit.
- ഉയർന്ന തലത്തിലുള്ള ഇൻപുട്ട്: If your head unit does not have RCA outputs, use the provided high-level input harness to connect directly to your head unit's speaker wires.
- സ്പീക്കർ ഔട്ട്പുട്ട്: ഇതിലേക്ക് നിങ്ങളുടെ സ്പീക്കറുകൾ ബന്ധിപ്പിക്കുക amplifier's speaker output terminals using the provided wafer connectors. Ensure correct polarity (+ to + and - to -) for each speaker. The amplifier is 4 Ohm stereo stable.
6. പ്രവർത്തന നിർദ്ദേശങ്ങൾ
6.1 നേട്ട ക്രമീകരണം
The gain control adjusts the input sensitivity of the amplifier to match the output level of your head unit. To set the gain:
- തിരിയുക ampലിഫയറിന്റെ ഗെയിൻ കൺട്രോൾ അതിന്റെ ഏറ്റവും കുറഞ്ഞ (പൂർണ്ണമായും എതിർ ഘടികാരദിശയിൽ) സജ്ജീകരണത്തിലേക്ക്.
- Set your head unit's volume to about 75% of its maximum level.
- പതുക്കെ വർദ്ധിപ്പിക്കുക ampവക്രീകരണം കേൾക്കുന്നതുവരെ ലിഫയറിന്റെ നിയന്ത്രണം നേടുക, തുടർന്ന് ശബ്ദം വ്യക്തമാകുന്നതുവരെ അത് ചെറുതായി ഓഫ് ചെയ്യുക.
6.2 ക്രോസ്ഓവർ ക്രമീകരണങ്ങൾ
ദി amplifier features a 3-way selectable electronic crossover network with High/Flat/Low Pass filter options. This allows you to direct specific frequency ranges to your speakers.
- ഹൈ പാസ്: Allows only frequencies above a certain point to pass through, typically used for tweeters or full-range speakers to prevent low bass distortion.
- FLAT (FULL RANGE): Allows all frequencies to pass through, suitable for full-range speakers or if an external crossover is used.
- ലോ പാസ്: Allows only frequencies below a certain point to pass through, typically used for subwoofers.
Select the appropriate setting based on your speaker configuration and desired sound.
7. പരിപാലനം
The Nova AMP-100 ampലിഫയറിന് കുറഞ്ഞ അറ്റകുറ്റപ്പണികൾ മാത്രമേ ആവശ്യമുള്ളൂ. അതിന്റെ ദീർഘായുസ്സ് ഉറപ്പാക്കാൻ ഈ മാർഗ്ഗനിർദ്ദേശങ്ങൾ പാലിക്കുക:
- വൃത്തിയാക്കൽ: ഇടയ്ക്കിടെ തുടയ്ക്കുക ampമൃദുവായതും ഉണങ്ങിയതുമായ തുണി ഉപയോഗിച്ച് ലിഫയറിന്റെ പുറംഭാഗം തടവുക. കഠിനമായ രാസവസ്തുക്കളോ അബ്രാസീവ് ക്ലീനറുകളോ ഉപയോഗിക്കരുത്.
- വെൻ്റിലേഷൻ: എന്ന് ഉറപ്പാക്കുക ampശരിയായ താപ വിസർജ്ജനം നിലനിർത്തുന്നതിന് ലിഫയറിന്റെ കൂളിംഗ് ഫിനുകൾ പൊടിയും അവശിഷ്ടങ്ങളും ഇല്ലാതെ തുടരുന്നു.
- കണക്ഷനുകൾ: ഇടയ്ക്കിടെ എല്ലാ വയറിംഗ് കണക്ഷനുകളും സുരക്ഷിതമാണെന്നും തുരുമ്പെടുക്കലിൽ നിന്ന് മുക്തമാണെന്നും ഉറപ്പാക്കാൻ പരിശോധിക്കുക.
8. പ്രശ്നപരിഹാരം
നിങ്ങളുടെ ഉപകരണത്തിൽ പ്രശ്നങ്ങൾ അനുഭവപ്പെടുകയാണെങ്കിൽ ampലിഫയർ, സാധാരണ പ്രശ്നങ്ങളും പരിഹാരങ്ങളും അറിയാൻ താഴെയുള്ള പട്ടിക കാണുക:
| പ്രശ്നം | സാധ്യമായ കാരണം | പരിഹാരം |
|---|---|---|
| പവർ ഇല്ല / പവർ LED ഓഫാണ് | Blown fuse; Loose power/ground/remote wire; Incorrect wiring. | Check in-line fuse; Verify all power, ground, and remote connections are secure and correct. |
| സൗണ്ട് ഔട്ട്പുട്ട് ഇല്ല | Loose speaker wires; Incorrect input connection; Head unit issue; Gain set too low. | Check speaker connections and polarity; Verify RCA or high-level input is connected correctly; Test head unit; Adjust gain. |
| വികലമായ ശബ്ദം | Gain set too high; Incorrect crossover setting; Speaker impedance mismatch. | Reduce gain; Adjust crossover settings; Ensure speakers are 4 Ohm stable. |
| എഞ്ചിൻ ശബ്ദം / ഞരക്കം | Poor ground connection; RCA cables routed near power wires; Ground loop. | Ensure solid ground connection; Reroute RCA cables away from power wires; Install a ground loop isolator if necessary. |
9 സ്പെസിഫിക്കേഷനുകൾ
| ഫീച്ചർ | സ്പെസിഫിക്കേഷൻ |
|---|---|
| മോഡൽ നമ്പർ | AMP-100 |
| ചാനലുകൾ | 2 |
| മൊത്തം പവർ put ട്ട്പുട്ട് | 300 വാട്ട്സ് |
| Output (at 14.4V DC input) | 2Ch x 150 Watts |
| അളവുകൾ (L x W x H) | 3.94" x 2.5" x 1.6" (10 x 6.35 x 4.06 സെ.മീ) |
| ഫ്രീക്വൻസി പ്രതികരണം | 20-20k Hz |
| സ്റ്റീരിയോ വേർതിരിക്കൽ | 55dB-യിൽ കൂടുതൽ |
| ശബ്ദ അനുപാതത്തിലേക്ക് സിഗ്നൽ | More Than 90 Db |
| Peak Total Harmonic Distortion | കുറഞ്ഞത് 0.1% |
| ഓപ്പറേറ്റിംഗ് വോളിയംtage | 12-14.8 വോൾട്ട് ഡിസി |
| ഇനത്തിൻ്റെ ഭാരം | 13 ഔൺസ് (0.37 കി.ഗ്രാം) |
10. വാറൻ്റിയും പിന്തുണയും
വാറന്റി വിവരങ്ങൾക്കോ സാങ്കേതിക പിന്തുണയ്ക്കോ, വാങ്ങുന്ന സമയത്ത് നൽകിയിട്ടുള്ള ഡോക്യുമെന്റേഷൻ പരിശോധിക്കുകയോ നിങ്ങളുടെ റീട്ടെയിലറെ ബന്ധപ്പെടുകയോ ചെയ്യുക. ഏതെങ്കിലും വാറന്റി ക്ലെയിമുകൾക്കായി നിങ്ങളുടെ വാങ്ങിയതിന്റെ തെളിവ് സൂക്ഷിക്കുക.