1. ഉൽപ്പന്നം കഴിഞ്ഞുview
Gorilla Heavy Duty Double Sided Mounting Tape provides a strong, permanent bond for various indoor and outdoor projects. This industrial-strength, double-sided adhesive tape is designed to conform to both smooth and rough surfaces, offering an instant and long-lasting weatherproof hold. It serves as an alternative to traditional fasteners like nails or screws, simplifying mounting and repair tasks.
This tape is capable of holding up to 30 pounds, with a recommended application of 2 inches of tape per 1 pound of weight. It is suitable for a wide range of materials including plastic, metal, wood, glass, brick, ceramic, and stone.
2 പ്രധാന സവിശേഷതകൾ
- Industrial Strength: Designed for heavy-duty applications, holding up to 30 pounds.
- Double-Sided Adhesive: Features adhesive on both sides for secure mounting.
- കാലാവസ്ഥാ പ്രതിരോധം: Suitable for both indoor and outdoor use, resistant to weather conditions.
- Permanent Bond: Creates a strong, permanent attachment to surfaces.
- ബഹുമുഖ ആപ്ലിക്കേഷൻ: Adheres to smooth and rough surfaces including plastic, metal, wood, glass, brick, ceramic, and stone.
3. സജ്ജീകരണവും ഇൻസ്റ്റാളേഷനും
3.1 ഉപരിതല തയ്യാറാക്കൽ
Ensure the surface where the tape will be applied is clean, dry, and free from dirt, dust, and oil. Proper surface preparation is crucial for optimal adhesion.
3.2 അപേക്ഷാ ഘട്ടങ്ങൾ
- അളക്കലും മുറിക്കലും: Determine the required length of tape. A general guideline is to use 2 inches of tape per 1 pound of weight for the item being mounted. Cut the tape to the appropriate lengths.
- Apply to Object: Apply the double-sided adhesive tape to the back of the object you intend to mount. Apply the tape vertically to allow for even distribution of weight. Avoid touching the adhesive surface of the tape to maintain its stickiness.
- Secure Tape: Press firmly on the tape to secure it to the object.
- ലൈനർ നീക്കം ചെയ്യുക: Carefully remove the clear protective liner from the exposed side of the tape.
- Position Object: Align the object to its desired placement on the wall or surface.
- ദൃഢമായി അമർത്തുക: Press the object firmly against the surface for at least 60 seconds. Gorilla Heavy Duty Mounting Tape conforms to the surface and creates a strong, permanent bond.
4. പ്രധാന പരിഗണനകൾ
- Permanent Bond: Once the tape is used to mount an object, it is intended to be held in place permanently and is not designed for easy removal. Attempting to remove it may cause surface damage or leave residue.
- ആപ്ലിക്കേഷൻ താപനില: For best results, apply the tape in temperatures above 50°F (10°C).
- സേവന താപനില: The tape can withstand continuous temperatures up to 194°F (90°C) and intermittent temperatures up to 302°F (150°C).
- Surface Limitations: Not recommended for use on wallpaper, delicate surfaces, polyethylene and polypropylene plastics, Teflon®, or other non-stick surfaces.
5. ഉൽപ്പന്ന സവിശേഷതകൾ
| ആട്രിബ്യൂട്ട് | മൂല്യം |
|---|---|
| ബ്രാൻഡ് | ഗൊറില്ല |
| മോഡൽ നമ്പർ | 6055001 |
| നിറം | കറുപ്പ് |
| മെറ്റീരിയൽ | Acrylic Foam |
| വലിപ്പം | 1 inch x 60 inches (5 ft) |
| വലിച്ചുനീട്ടാനാവുന്ന ശേഷി | 30 പൗണ്ട് വരെ സൂക്ഷിക്കുന്നു |
| ജല പ്രതിരോധ നില | വാട്ടർപ്രൂഫ് |
| ഉയർന്ന താപനില റേറ്റിംഗ് | 302°F (150°C) |
| താഴ്ന്ന താപനില റേറ്റിംഗ് | 10°C (50°F) |
| അനുയോജ്യമായ മെറ്റീരിയലുകൾ | DIY, Wood, Ceramic, Glass, Plastic, Industrial, Metal, Stone |
| Adhesive Format | ഇരട്ട-വശങ്ങളുള്ള |
6. Media Resources
6.1 ഉൽപ്പന്ന ചിത്രങ്ങൾ
6.2 ഔദ്യോഗിക ഉൽപ്പന്ന വീഡിയോ
7. വാറൻ്റിയും പിന്തുണയും
For specific warranty information, product support, or to view other quality products from The Gorilla Glue Company, please visit the official Gorilla website or refer to the product packaging for contact details. Always ensure to follow all instructions and safety warnings provided with the product.