Упатство за употреба Q&AОдговори
Aug 01, 2025 - 06:32 AM
To change the setpoints on the KE2 Temp + Valve controller, следете ги овие чекори:
1. Access Setpoint mode by pressing and holding the "Enter" button until "Control Type (CtL)" displays on the screen.
2. Use the up and down arrow buttons to advance through the available setpoints.
3. Press the "Enter" button to view моменталната поставка.
4. Press the up or down arrow buttons to change the setpoint value.
5. Press and hold the "Enter" button to confirm each setpoint change.
6. Press the "Back" button to escape and return to normal operation.
Remember to refer to the complete instructions provided in the упатство за употреба for detailed information on each setpoint and its range.
Додај нов коментар