QUICK START GUIDE
For a perfect start.
www.miyoworld.eu
Instructions for use & Preparation
Instructions for use
- Do not pour surplus liquid out of the container. Mix it back into a paste.
- Mix MiYO Color, MiYO Structure and Glaze Paste thoroughly with a metal-free spatula before each use.
- The pastes must not come into contact with water.
- Always use a clean and dry brush.
Mix MiYO Color, Structure and Glaze Paste thoroughly with a metal-free spatula before each use.
Preparation
- Framework preparation: in accordance with the manufacturer‘s instructions (see notes in the MiYO Workbook p. 19).
- Before applying the material, the surface must be clean and free of surface contamination.
Application
- Apply material to the prepared surface according to its purpose and required effect.
Storage and disposal
- Store in a dry place.
- Small quantities can be deposited in household waste. Remaining stocks or removed restorations must be disposed in accordance with national legal requirements.
Training & Support
Register for the customer portal
We provide you with exclusive training and information material in the customer portal.
Watch the training videos to learn how to use MiYO and MiYO pink. Firing instructions and furnace programming instructions will help you to programme your furnace.
https://www.miyoworld.eu/en/login-en/registrierung
Register at: www.miyoworld.eu/en/login-en/registrierung
To register, you will need the MiYO kit number, which can be found on the lid of the MiYO kit and under the liquid.
Instruction manual
All documents for MiYO, MiYO pink and the glaze pastes are available on the enclosed USB stick or for download in various languages on our website www.miyoworld.eu/en/downloads
Find more information in your language on the USB Stick
Support
Do you have any questions about MiYO?
Please contact your local MiYO dealer.
For technical support you can also contact Jensen: support@jensendental.de
Training & Courses
For MiYO training and courses, please contact your local MiYO dealer.
www.miyoworld.eu/en/dealer
Firing charts
| Firing paramter* | COLOR I STRUCTURE I GLAZE PASTE | |||
| Zr02 | InSync ZR | Lithium Disilicate | Press to Zirconia | |
| start temperature [°C] | 400- 450 | 400 – 450 | 400 – 450 | 400 – 450 |
| dry time [min] | 3 | 3 | 3 | 3 |
| closing time [min] | 4 | 4 | 4 | 4 |
| heat rate [°C / min] | 45 | 45 | 45 | 45 |
| holding time 1 [s] | 30 – 45 | 30 – 45 | 30 – 45 | 30 – 45 |
| vacuum start [°C] | 580 | 580 | 580 | 580 |
| end temperature [°C] | 720 | 720 | 710 | 720 |
| vacuum end [°C] | 720 | 720 | 710 | 720 |
| holding time 2 [sr* | 30 – 60 | 30 – 60 | 30 – 60 | 30 – 60 |
| opening time [min] | 1 | 1 | 1 | 1 |
| Firing paramter* | HT STRUCTURE | |
| Zr02 | InSync Zr | |
| start temperature [°C] | 400 – 450 | 400 – 450 |
| dry time [min] | 3 | 3 |
| closing time [min] | 4 | 4 |
| heat rate [°C / min] | 45 | 45 |
| holding time 1 [s] | 30 – 45 | 30 – 45 |
| vacuum start [°C] | 600 | 600 |
| end temperature [°C] | 775 | 775 |
| vacuum end [°C] | 775 | 775 |
| holding time 2 [s]** | 60 | 60 |
| opening time [min] | 1 | 1 |
* The !ring temperatures are standard values and may vary depending on the type of furnace and the size (volume) of the restoration.
** Depending on the desired shine, holding time should be 30 – 60 seconds.
Firing graphs
Adjustment of various !ring parameters according to the size of the restoration, for details see MiYO Workbook p. 14
Please note: Delayed vacuum start!
Application of MiYO pink masses
| Translucent base colors for large gingival areas. |  |
| Translucent base shade for orange gingival areas. |  |
| Bluish color for veins |  |
| Red color paste pure or to mix for shading. |  |
| Non-“uorescent opaque color materials for individualization in and on the translucent gingival materials. |  |
| Pure black to customise MiYO pink masses. |  |
| Powder for insertion into the transparent materials. |  |
| Dark pink structure material. |  |
| Brownish-reddish structure material. |  |
| Whitish-pink Structure material – e.g. for shaping the lip frenulum. |  |
Application of MiYO masses
| To characterize the basic Vita Classic colors. |  |
| For individualizing the cervical area. |  |
| For individualizing the interproximal area. |  |
| Reduce brightness value and achieve a depth effect. |  |
| Increase brightness value without losing translucency. |  |
| Modify color pastes to a warm, soft base color. |  |
| Modi!es color pastes into reddish/ purple. |  |
| Imitate natural mamelons. |  |
| Imitate the halo effect in the incisal area. |  |
| Imitate enamel defects, calcium stains, chalk-colored cusp tips/ slopes. |  |
| Generate „broken“ whitening effects like cracks lines or discoloration. |  |
| Color powder to imitate !ssures or colored pits. |  |
| For individualizing MiYO Color pastes. |  |
| To reduce the brightness value with a higher intensity. |  |
| Structure pastes to build up the form and characterize the surface texture. |  |
| High fusing structure pastes for restorations with large volume and more “exiblity for firing. |  |
Sales and technical support Europe:
Jensen GmbH
Gustav-Werner-Straße 1
72555 Metzingen, Germany
Telefon 0800 – 857 32 30
info@jensendental.de
www.miyoworld.eu
www.jensendental.de
Manufactured by:
Chemichl AG
Landstrasse 114
9490 Vaduz, Liechtenstein
info@chemichl.com
www.chemichl.com
… more MiYO
Documents / Resources
 |
MiYO Color Structure and Glaze Paste [pdf] User Guide aColor Structure and Glaze Paste, Structure and Glaze Paste, Glaze Paste, Paste |