MITSUBISHI-logo

MITSUBISHI MZ314537 Hands Free Module Kit

MITSUBISHI-MZ314537-Hands-Free-Module-Kit-product

What’s In The Box

MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-1

TOOLS REQUIRED

MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-2

Note:
In order to add the functionality of the fuse link system, a USB Adapter kit is required. Please refer to the Accessory P&A Guide for the correct part number to order. Please see Parts Bulletin No. 54-XX-01-10 R1 for additional information.

PRECAUTIONS

Disconnect the (-) cable from the battery

MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-3

Connections
Locate the 28 Pin connector and connect it to the Bluetooth module.MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-4MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-5 MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-6 MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-7

Press “Hands Free Module“ on Service mode screen (1/2)

Reinstallation:
Reinstall the battery ground terminal

Check:
Bluetooth Hands-free operation

  • Press the speech button located on the steering wheel and wait for the Bluetooth system response. Cancel system usage by saying “Cancel” and waiting for the system confirmation tone.

AUDIO CONTROL PANEL

MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-8

AUDIO CONTROL PANEL

MITSUBISHI-MZ314537-Hands-Free-Module-Kit-fig-9

Documents / Resources

MITSUBISHI MZ314537 Hands Free Module Kit [pdf] Instruction Manual
MZ314537 Hands Free Module Kit, MZ314537, Hands Free Module Kit, Free Module Kit, Module Kit

References

Leave a comment

Your email address will not be published. Required fields are marked *