MitoPRO Series X Dual Chip Dual Circuit LED Panel
Product Information
Specifications:
- Model: XYZ-2000
- Dimensions: 10 x 5 x 3 inches
- Weight: 2 lbs
- Power: 120V AC
- Color: Black
Product Usage Instructions:
1. Setup:
Place the product on a flat, stable surface near a power outlet.
Ensure the power switch is in the off position before plugging
in.
2. Power On:
Switch the power button to the on position. The indicator light
should illuminate to show the product is powered.
3. Operation:
Follow the specific operation instructions for your desired
function. Refer to the user manual for detailed guidance on
different modes and settings.
4. Cleaning and Maintenance:
Before cleaning, ensure the product is unplugged. Use a damp
cloth to wipe the exterior surface. Do not use harsh chemicals or
abrasive materials.
Frequently Asked Questions (FAQ):
Q: How do I change the settings on the product?
A: Refer to the user manual for detailed instructions on
changing settings. Typically, you will need to navigate through the
menu using the control panel.
Q: Is the product waterproof?
A: No, the product is not waterproof. Avoid exposing it to water
or moisture to prevent damage.
Q: What should I do if the product stops working?
A: Check the power source, ensure all connections are secure,
and refer to the troubleshooting section of the user manual. If
issues persist, contact customer support for assistance.
Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
Documents / Resources
 |
mitoredlight MitoPRO Series X Dual Chip Dual Circuit LED Panel [pdf] User Manual MITOPRO1500X, 2BQZO-MITOPRO1500X, 2BQZOMITOPRO1500X, MitoPRO Series X Dual Chip Dual Circuit LED Panel, MitoPRO Series X, Dual Chip Dual Circuit LED Panel, Chip Dual Circuit LED Panel, Dual Circuit LED Panel, Circuit LED Panel, LED Panel, Panel |