Mircom RTI-1 Remote Trouble Indicator
FIRE ALARM ACCESSORIES
- Loud piercing sound
- Easy to install
- UL & ULC listed
Mircom’s Remote Trouble Indicator provides remote annunciation of fire alarm troubles. The RTI-1 mounts onto a standard single gang electrical box. The RTI-1 can be used with any of Mircom’s fi re alarm control panels.
WG-Series Wire Guards
- Easy to install
- Chrome plated steel construction
- Fits directly over detector or bell
The WG-Series wire guards provide protection of bells and detectors from physical damage in manufacturing plants, gymnasiums, warehouses and related hazardous areas. The guards fi t directly over most heat, smoke detectors or bells. They will not mount over detectors which are installed on to surface mounted electrical boxes.
MP-300 End Of Line Plates
- UL and ULC listed
- Rated up to 47K @ 1W
- Complementary white exterior
- Fits over a standard single gang box
Mircom’s MP-300 End of Line Resistor plate provides an attractive and accessible location for fi re alarm circuit resistor mounting. The resistor mounted on the E.O.L. plate is of a value specifi ed by the control panel manufacturer.
Fire Alarm Batteries
- Long Life
- Completely Sealed
- Maintenance Free
- Wide range of amperage ratings
Mircom’s sealed lead-acid batteries are completely maintenance-free. The sealed lead-acid batteries provide full rated power on demand. The 12V batteries have a wide range of amperage ratings from 4AH to 65AH.
Ordering Information
NOT TO BE USED FOR INSTALLATION PURPOSES.
Canada
25 Interchange Way
Vaughan, Ontario L4K 5W3
Telephone: 905-660-4655
Fax: 905-660-4113
Web page: http://www.mircom.com
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: 888-660-4655
Fax Toll Free: 888-660-4113
Email: mail@mircom.com
Documents / Resources
 |
Mircom RTI-1 Remote Trouble Indicator [pdf] Owner's Manual WG-Series Wire Guards, RTI-1 Remote Trouble Indicator, RTI-1, Remote Trouble Indicator, Trouble Indicator, Indicator |
