PAM Series Multi Voltage Control Relays
Owner’s Manual
Description
The PAM Series Relays are encapsulated multivoltine devices with “flying” leads that offer versatile, reliable performance in a convenient package. Several of the versions contain a red LED which indicates when the relay coil is energized. The PAM Series Relays are packaged with a self-tapping screw and a piece of double sided tape for easy installation almost anywhere. The relays are also packaged with wisents to aid installation.
PAM Relays are ideal for applications where remote relays are required for control or status feedback. They are suitable for use with HVAC, Temperature Control, Fire Alarm, Security, Energy Management, Lighting Control Systems and Building Automation Systems.
PAM-1
The PAM-1 Relay provides 10.0 A form “C” contacts. The relay may be energized by one of three input voltages: 24VDC, 24VAC, or 120VAC. The input voltages are polarity-sensitive and diode-protected. PAM-1 Relays contain a red LED which indicates when the relay coil is energized. This relay may not be suitable for continuous duty use at 120VAC for extended periods of time. For these applications, please refer to our RIC-Series products.
Features
- Multi-voltage operation
- Activation LEDS to indicate when the relay coil is energized
- Easy installation
- Ideal for applications where remote relays are required for control or status feedback
- Suitable for use with HVAC, Temperature Control, Fire Alarm, Security, Energy Management, Lighting Control Systems and Building Automation Systems
PAM-2
The PAM-2 Relay provides 7.0 A form “C” contacts. The relay may be energized by one of two input voltages: 12VDC or 24VDC. The input voltages are polarity-sensitive and diode-protected. PAM-2 Relays contain a red LED which indicates when the relay coil is energized.
PAM-3
The PAM-3 Relay provides a 3.0 A form “A” contact. The relay may be energized across a wide voltage range from 9VDC to 40VDC, making it ideal for 12VDC and 24VDC EOL circuits. The 19.3 mA operating current is constant across the operating range. The input voltage is polarity-sensitive and diode-protected.
PAM-4
The PAM-4 Relay provides 10.0 A form “C” contacts. The relay may be energized across a wide voltage range from 9VDC to 40VDC, making it ideal for 12VDC and 24VDC EOL circuits. The 15mA operating current is constant across the operating
Wiring Diagrams
Specifications
| Model Number | PAM-1 | PAM-2 | PAM-3 | PAM-4 |
| Coil Voltage | 24VAC/24VDC/120VAC | 12VDC/24VDC | 9 to 40VDC | 9 to 40VDC |
| Polarized | Yes | Yes | Yes | Yes |
| Energized Led Indicator | Yes | Yes | No | No |
| Current Requirement | ||||
| @12VDC | – | 15mA | 19.3mA | 15mA |
| @24VDC | 15mA | 15mA | 19.3mA | 15mA |
| @24VAC | 31mA | – | – | – |
| @120VAC | 19mA | – | – | – |
| Contact Configuration | (1) SPDT dry form “C” | (1) SPDT dry form “C” | (1) SPST dry form “A” | (1) SPDT dry form “C” |
| Contact Ratings (contact rating / power factor) | ||||
| @5VDC | 250μA / .35 PF | 250μA / .35 PF | – | 250μA |
| @24VDC | 7A / .35 PF | 7A / .35 PF | 3A / .35 PF | 7A |
| @120VAC | 10A | 7A / .35 PF | 3A / .35 PF | 10A |
| Wire Leads | 6 “flying” leads 12” / 18 AWG Wire-nuts provided |
6 “flying” leads 12” / 18 AWG Wire-nuts provided |
4 “flying” leads 12” / 18 AWG Wire-nuts provided |
5 “flying” leads 12” / 18 AWG Wire-nuts provided |
| Ambient Temperature (@ 100% RH, condensing) | 32°F to 120°F (0°C to 49°C) | 32°F to 120°F (0°C to 49°C) | 32°F to 120°F (0°C to 49°C) | 32°F to 120°F (0°C to 49°C) |
| Construction | 100% potted (sealed) with “flying” leads | |||
| Mounting | Pre-drilled mounting screw hole and self tapping screw provided. Double sided tape provided. | |||
| Dimensions | 1.50” (38mm) H x 1.00” (25mm) W x 0.80” (20mm) | 1.50” (38mm) H x 1.00” (25mm)Wx0.90”(23mm)D | 1.50” (38mm) H x 1.00” (25mm)Wx0.90”(23mm)D | 1.50” (38mm) H x 1.00” (25mm)Wx0.90”(23mm)D |
Ordering Information
| Model Number | Description |
| PAM-1 | Encapsulated relay, Single SPDT, 10.0 A form “C” contact |
| PAM-2 | Encapsulated relay, Single SPDT, 7.0 A form “C” contact |
| PAM-3 | End-Of-Line Relay, 3.0 A form “A” contact |
| PAM-4 | Encapsulated relay, Single SPDT, 10.0 A form “C” contact |
CATALOG NUMBER 5317
NOT TO BE USED FOR INSTALLATION PURPOSES.
Morcom reserves the right to make changes at any time without notice in prices, colors, materials, components, equipment, specifi cations and models and also to discontinue models.
NOT TO BE USED FOR INSTALLATION PURPOSES.
Distributed by:
ISO 9001:2008
REGISTERED
Canada
25 Interchange Way
Vaughan, Ontario L4K 5W3
Telephone: 905-660-4655
Fax: 905-660-4113
Web page: http://www.mircom.com
U.S.A.
4575 Witmer Industrial Estates
Niagara Falls, NY 14305
Toll Free: 888-660-4655
Fax Toll Free: 888-660-4113
Email: mail@mircom.com
firealarmresources.com
Documents / Resources
 |
Mircom PAM Series Multi Voltage Control Relays [pdf] Owner's Manual PAM Series, Multi Voltage Control Relays, PAM Series Multi Voltage Control Relays, Voltage Control Relays, Control Relays, Relays |
