minova-logo

minova MCRN2P RFID Reader with OLED Display

minova-MCRN2P-RFID-Reader-with-OLED-Display-product

Specifications

  • Product Name: MCRN2P RFID-Reader with OLED Display
  • Version: R 1.4 April. 01, 2025
  • Frequency Interface
  • Standards Supported Cards & Transponders
  • Antenna Display Housing Power supply Dimensions

Product Usage Instructions

  • The MCRN2P RFID Reader with OLED Display is a versatile device designed for reading RFID cards and transponders.
  • It comes with an OLED display for easy interaction.
  • The device has dimensions of 100 x 100 x 25 mm and comes with blind lids for wall mounting.
  • The product is available in various variants and ordering codes for different interfaces and features.
  • Choose the appropriate variant based on your requirements.

Parameters

  • Input Voltage: +12V
  • Input Current: 100 – 200 mA
  • Maximum Reverse Voltage: +60V
  • Ambient Temperature Range: +2°C to +85°C
  • Output Voltages: +3.3V to +13V
  • Relays: 2x Solid State Relays (1.2A, 3A peak)
  • ESD Performance: +30V
  • MTBF: 500,000 hours

Key Features

Frequency 13.56 MHz
Interface Ethernet (PoE-Enabled) RS485/RS232
Standards ISO14443A/B, ISO15693
Supported Cards & Transponders MIFARE® Family & NTAG I-Code

NFC Smartphones

Antenna Internal
Display OLED 128×64
Housing Waterproof IP65
Power supply +12V or PoE
Dimensions 100x100x25mm

DESCRIPTION

  • The MCRN2P is a robust outdoor RFID reader equipped with an OLED display, designed for secure access control in various environments.
  • Ideal for a wide range of access points, it ensures reliable and efficient management of authorized entries.
  • With its durable build, it’s suited for all-weather conditions, making it a dependable choice for high-security areas.
  • The OLED display provides clear instructions, enhancing user experience and operational efficiency.
  • Perfect for locations requiring stringent access management, such as depots or logistics hubs.

ELECTRICAL

SYMBOL PARAMETER MIN TYP MAX UNIT
VIN Input Voltage +8 +60 V
IIN Input Current (VIN=+12V) 100 200 mA
VR Maximum Reverse Voltage +60 V
TA Ambient Temperature Range -40 +85 °C
RS485-VOD Differential Output (RL=54Ω) +1.5 +2 +3.3 V
RS485-A/B Input Voltages -8V +13 V
RS485-A/B Output Voltages +3.3 V
RS232 Receiver Input Voltages -30   +30 V
RS232 Transmitter Output Voltages ±5 ±5.2 V
Relays (SSR) 2x Solid State Relays 1.2A (3A peak) 30V    
 ESD Performance                                                                                                                                                                                                                
RS485-A/B IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact)    
RS232 IEC 61000-4-2 (ESD ) ±15kV (air), ±8kV (contact)    
MTBF   500.000h    

DIMENSIONS & MOUNTING

minova-MCRN2P-RFID-Reader-with-OLED-Display-fig-1

VARIANTS

minova-MCRN2P-RFID-Reader-with-OLED-Display-fig-2

ORDERING CODES

ARTICLE NR: Interface Relays Inputs RS232 RS485 Waterproof Power Supply Output Type
MCRN2P-1200 PoE 2 2 1 1   PoE or Vin Open outputs
MCRN2P-120V Passive-PoE 2 2 1 1   +12VDC Open outputs
MCRN2P-1100R PoE         IP65 PoE Rear Output
MCRN2P-1100S PoE         IP65 PoE Side Output
MCRN2P-1101 RS485       1 IP65 +12VDC Side Output
MCRN2P-1102 RS232     1   IP65 +12VDC Side Output
MCRN2P-1150R PoE 2       IP65 PoE Rear Output
MCRN2P-1150S PoE 2       IP65 PoE Side Output

Article Number

  • MCRN2P-1XXX_
    • R: Rear cable outputs
    • S: Side cable outputs

FCC STATEMENT

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated at a minimum distance of 20cm between the radiator and your body.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, according to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Part 15.19 Warning Statement- (Required for all Part 15 devices)
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

  1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
  2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRABLE OPERATION.

FCC Part 15.21 Warning Statement
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

CONTACT

FAQ

  • Q: What is the input voltage range for the MCRN2P RFID-Reader?
    • A: The input voltage range is from +12V.
  • Q: Is the MCRN2P RFID reader waterproof?
    • A: Yes, the device has an IP65 waterproof rating.
  • Q: How many solid-state relays are included in the MCRN2P RFID-Reader?
    • A: The device includes 2 solid-state relays.

Documents / Resources

minova MCRN2P RFID Reader with OLED Display [pdf] Owner's Manual
MCRN2P-1100, MCRN2P-1200, MCRN2P-120V, MCRN2P-1100R, MCRN2P-1100S, MCRN2P-1101, MCRN2P-1102, MCRN2P-1150R, MCRN2P-1150S, MCRN2P RFID Reader with OLED Display, MCRN2P, RFID Reader with OLED Display, Reader with OLED Display, OLED Display, Display, Reader

References

Leave a comment

Your email address will not be published. Required fields are marked *