MINISO MS199 Wireless Earbud
PRODUCT OVERVIEW
Welcome to MINISO Clip-on wireless earphones
Take it out and pair it
- When using for the first time, remove the left and right earbuds. Wear both earbuds simultaneously.
- When the earbuds’ White and Red indicator lights alternate flash, the earbuds will enter auto-pairing mode
How to wear headphones correctly
Product Description
Specification of Product
- Model of Product: MS199
- Version: V6.0
- Effective Distance: Approx. 1 Om
- Speaker Diameter: Φ11 mm
- Impedance: 16Ω
- Frequency Response: 20Hz-20KHz
- Microphone Sensitivity: 42 dB: 1:1 dB
- Earphone Input: SV
30mA - Charging Case Input: 5V400mA
- Charging Case Output: 5V60mA
- Earphone Battery Capacity: 30mAh
- Charging Case Battery Capacity: 400mAh
- Duration: Approx: 4 H (Earphones)
- Earphone Charging Time: Approx. 1.5 H
- Charging Time of the Charging Case: Approx. 1.5 H
Touch Operation
Connect with a Bluetooth device
- Open the Bluetooth settings option of the Bluetooth device to be paired, enter the options, and find the Bluetooth pairing name of the headset MINISO-M5199″.Click the pairing name to pair.
Indicator Light Description
- When the headset is turned on, the White and Red indicator lights alternate flash
- When the headset is turned off, the red indicator light flashes 3 times and then turns off
- Pairing status: Main earbud White and Red indicator lights alternate flash. The secondary earbud light turns off
- Connection successful: No light
- Headphone Charging: White indicator light remains on.
- When fully charged, the White indicator light turns off.
Charging of the Charging case:
- The charging case display screen shows the battery level, and when fully charged, the charging case screen shows 100%
- Note: After the charging status is displayed on the display screen of the Charging Case, it will automatically turn off after about 30 seconds of inactivity. Sliding can enter the display screen.
Power On
- Auto power on: When the Earphones are taken out of the charging case, the Earphones will be powered on, with the prompt sound of Du.
- Manual power on: Long press for 3 seconds, the earphones will be powered on, with the prompt sound of Du.
Power Off
- Auto power off: Put the Earphones in the charging case, and the Earphones will be powered off, with the prompt sound of Du.
- Manual power off: long press for 5 seconds, the Earphones will be powered off, with the prompt sound of Du.
- Note: After turning on the device, if it is not paired and connected to the Bluetooth device for 3 minutes, it will automatically shut down; it has exceeded the effective connection distance and has not connected to the Bluetooth device.
- After 3 minutes, it will autometically shut down with a beep sound.
Once Press
Double Press
Long Press
Wake up, voice assistant
- When using both ears, press and hold the left ear multi-function button for 2 seconds to activate the voice assistant.
- When using one earphone, press and hold the left (or right) earphone for 2 seconds to activate the voice assistant.
Phone mode
- Press and hold the left (or right) ear multi-function button for two seconds: call rejection
Triple Press
Music mode
Triple press on the left ear: Previous song
Triple press on the right ear: next song
Switch between game mode and music mode 
Game mode
- Press and hold the multi-function button on the right ear for 2 seconds
Music mode
- Press and hold again for 2 seconds
- Note 1: When using one earphone, you cannot switch between game mode and music mode.
- Note 2: The factory setting defaults to music mode
Charging compartment operation
Lighting up the display screen
- Method 1: Press the multifunctional button of the Charging Case once to light up the screen.
- Method 2: Double-click the screen to turn it on.
- Turn off the display screen.
- Automatic shutdown: After turning on the screen for 30 seconds without operation, the display screen will automatically turn off.
- Manual closing: Press the Charging Case multifunctional button once to turn off the display screen.
- Note 1: First time use, please activate the power on
- Method 1. Charge and activate the charging case through the TYPE-C interface.
- Method 2. Long-press the multifunctional button on the charging case for 8 seconds to turn on the device
- Tip: This product defaults to shutdown mode when it leaves the factory. First use requires activation and startup.
Icon Introduction
Bluetooth status
Red: The earbuds and mobile phone are not connected- White: The earbuds and the charging case mobile phone are both connected.
Battery status
- Charging status indicator icon for the charging compartment
White: The earbuds are not in the case or fully charged- Yellow: The earbuds are charging in the case.
Headphone charging status indicator icon
White: The charging case is not charging- Yellow: The charging case is charging
- Power on for the first time
- When using it for the first time, it is in a shutdown state.
- You need to press and hold the power button of the charging case for 3 seconds to turn it on.
- After the screen shows the startup LOGO, it will enter the startup lock-screen interface
main screen
- When you swipe right on the lock-screen interface, it unlocks to the emoji main screen. In the emoji interface, you can switch emoji wallpapers.
Music interface
Voice assistant interface
- You can inquire about weather conditions, play music, etc
Wallpaper interface
- Tap to switch between different wallpapers.
- The current screen is the selected locked background wallpaper.
Find My Earphones interface
- Click the UR button, and the number 1 screen will appear
- Click to cancel and exit this function. Click to start, the number 2 screen will appear, and the headphone speaker will start emitting sound.
- Click the stop button to stop sounding
Al Translation
- APP translation content can be displayed on the current interface.
Volume adjustment interface
Equalizer interface
- Switch between different EQ sound effects: Country, Rock, Pop, Classical, Jazz
Mode select inter
- Tap the corresponding icon to switch game mode and music mode.
Light Level interface
- Click the left button to decrease the screen brightness.
- Click the button on the right to increase screen brightness.
Language switch interface
- Click to switch languages from different countries
TikTok page flipping and the like function
Needs to be connected to a Bluetooth device such as a cell phone
- This function is only available for use with TIKTOK software, and other software may not be able to use it.
- This feature may have compatibility issues with some phones, and some phones may not be able to use it.
- If there are situations where it cannot be used, please ignore this feature.
Photography function
Needs to be connected to a Bluetooth device such as a cell phone
- This function is only available for taking photos with the built-in camera of the phone. Other shooting software may not be able to use rt.
- This feature may have compatibility issues with some phones, and some phones may not be able to use it.
- If there are situations where it cannot be used, please ignore this feature.
Open the phone camera, click the button, and the phone will start taking photos- Note: When not in shooting mode, clicking this photo button will increase the volume
Definition of multifunctional button functions
- Click once: On/Off screen.
- Long press for 3 seconds: Power on.
- Long press for 5 seconds: Restart, power off, restore factory settings.
- Long press for 10 seconds: Auto-restart.
Item list
FCC
FCC ID: 2BHJR-MS199
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device:
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Warranty statement
MINISO product warranty card
The above guarantee does not apply to the following situations
- The validity period of the three guarantees has expired.
- The alteration of the warranty cards and product code does not match the product itself.
- Failure of damages caused by misuse, abuse, or improper transportation, use, maintenance, or storage;
- Failure of damages caused by force majeure (such as earthquake, war, fire, etc.) or accident;
- Zippers and tower buckles are damaged due to excessive force.
- Offline or tear caused by overloading;
- Any damage caused by sharp objects.
- Products with signs of burn damage or water logging;
- Damage caused by unauthorized dismantling and modification;
- Aging, discoloration, wear, cracking, and other losses occur during normal use of the product.
- If the product’s original logo or label is changed or damaged, this warranty will be invalid.
- The completeness and appearance of the product and accompanying materials are not covered by the warranty.
- You should inspect the product on site when receiving it and raise objections to any discrepancies.
MINISO Product Service Policy
- If you encounter a problem, please contact our customer service to solve it.
- After-sales email: 7@hifi-earphone.com.
Warranty Policy Disclaimer:
- This manual does not come with any form of warranty, position expression, or other implication.
- The products, specifications, and information mentioned inthis manual are for reference only, and the content will be updated on the website at any time without prior notice.
Warranty statement:
- The following guarantee is made for the products attached to this document: If the product is damaged due to quality defects under normal use within twelve(12) months from the date of your purchase (the uwarranty Period”), and if it can be repaired, it will be repaired free of charge; If the manufacturer confirms that it cannot be repaired, it will be replaced free of charge; the repaired product will continue to be covered by the warranty for the remaining warranty period(a minimum of not less than 30 days).
- The purchase date shall be based on the sales invoice date; if the purchase date cannot be determined, the warranty period shall be calculated as thirteen(13) months from the product production date.
- If you want to apply for warranty, please call the product service hotline first and follow our instructions. When applying for a warranty, you are required to provide a valid sales invoice that is accurate, complete and clearly filled out.
Guidelines for safe and effective use
Note: Please read this information first before using your Bluetooth headset. If the user makes modifications or modifications to this Bluetooth headset without permission, the user will lose the right to continue to enjoy the services included in the device
- Electromagnetic interference:
- Electronic devices: To avoid the effects of electromagnetic interference or configuration incompatibility, please turn off your Bluetooth device per regulations in places with clear instructions.
- Civil Aviation: After boarding the plane, please turn off your Bluetooth headset according to the flight attendant’s instructions. It is strictly prohibited to use Bluetooth headsets during flight to avoid interference with the aircraft communication system.
- Safety matters:
- Placement: It is recommended that when you are not using the Bluetooth headset, you place it in a place where it will not be squeezed. Squeezing may cause damage to the product or personal injury.
- Children: Do not let children play with Bluetooth headsets. Some of the small parts are detachable and may be swallowed and causing danger.
Important safety tips
- Except for the operation methods specifically marked in the manual, please do not attempt to disassemble or replace any parts in the product.
- This product contains a built-in rechargeable battery. It is prohibited to hit, squeeze, Puncture, or short-circuit the battery. If there are abnormal phenomena such as excessive temperature, deformation, bulging, or leakage, please stop using it.
- Do not expose the battery to open flames or sunlight. Do not use the battery after it has been immersed in water or high-temperature or high-pressure environments such as the sun, heaters, or stoves.
- After using the earphones, do not place the earphones in a humid, dusty, oily smoke, steam, direct sunlight or other high-temperature and high-pressure environment to avoid damage to the earphones and battery.
- The battery can be charged and discharged for a limited number of times and will eventually age. If the battery is used abnormally, it can be replaced with a new one.
- However, do not replace the battery by yourself. If the battery is not replaced properly, there is a risk of explosion. It can only be replaced by an after-sales service provider of the same or equivalent type. battery usage.
- After the product is used and scrapped, do not throw the product into a fire. The waste should be disposed of in strict accordance with the garbage classification.
- Please use this product reasonably and correctly to avoid causing certain injuries and environmental damage.
- During the use of headphones, due to long distances, obstacles in the middle, or a series of interferences such as other radio signals, Bluetooth signals, WIFI signals, etc., the headphones are used when listening to music, watching videos, playing games, etc., there will be occasional lags, voice out-of-sync or disconnection. If this happens, please reconnect the headphones or stay away from interference.
- When charging, please use a charging device with an output voltage of DC 5V/1A. You must choose a charging device from a regular manufacturer that has obtained CCC safety certification.
- Do not use a fast-charging charger to avoid excessive battery load, which may cause The battery to be damaged. Do not charge continuously for longer than the specified charging time. Do not use it while charging to avoid damage.
- Enjoy the company of MINISO
- Copyright@2025 MINISO Group affiliated companies and their licensors. All rights reserved
- Company Name: MIRAMONT SOLUTIONS LLC Address: 34218 HOURGLASS ST, TEMECULA,
US REP
- CA 92592, United States
- Contact Name: Wenyi Wang
- Telephone No: 9514013633
- Email: wenyiwang@miramontsolutions.com
Documents / Resources
 |
MINISO MS199 Wireless Earbud [pdf] Instruction Manual MS199, MS199 Wireless Earbud, Wireless Earbud, Earbud |