User Manual
Bluetooth

Specification Parameters

Control Panel Description

Usage Method

Bluetooth Pairing: Turn on device Bluetooth, Corinecting “mini- band” Bluetooth.There is a prompt sound for successful pairing, and the blue light will light up for one second before it goes out. If there is no connection, Bluetooth will turn off after eight minutes.
Charging Method: Insert the USB charging cable port into the
Bluetooth interface. When charging, the red light is constantly on. After charging, the blue light remains on.
Power ON & Power OFF: Long press on/off. Accompanied by a prompt sound of “power ON” or “power OFF”.
Music Playback & Pause: Click on music playback or pause.
Answer & End calls: Click to answer and end the call. When connected, accompanied by a prompt tone “incoming call”.
Reject Calls: Long press for two seconds to reject.
Last redial: Double click redial.
+ Volume up: Click to increase the volume.
Play Next Song: Long press to play the next song.
– Volume down: Click to decrease the volume.
Play Previous Song: Long press to play the previous song.

1. Remove The Bluetooth Module
   Grasp the products with the left hand and the Bluetooth module up and down with the right hand. Use your thumb to lift the Bluetooth module clockwise and diagonally upwards. When cleaning the product, it is necessary to use a wrench to remove the Bluetooth module.
2. Detaching Bluetooth Module
   Insert a wrench into the red and black port, and pull the external wrench to separate the Bluetooth module from the red and black connection cable.
3. Installing Bluetooth Module
   Insert the terminal (color) into the Bluetooth module port in red to red and black to black.

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This  equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Documents / Resources

miniBand ARniwer Bluetooth Player [pdf] User Manual 2BLFK-ARNIWER, 2BLFKARNIWER, ARniwer Bluetooth Player, ARniwer, Bluetooth Player, Player

References

• User Manual