MiLocks Programming Operating Instruction Manual

Programming

Programming Your First Code

Step 1: Remove the battery cover from the Back Module [Fig-A):
Step 2:  Unlock and keep door open during programming. Locate the C, and S, buttons and the 1-2 switch located under the batteries [Fig-B].
Step 3:  To clear all pre-programmed codes, press and hold the C (Cancel) button for 10 seconds until you hear two beeps [Fig-C]

Step 4:  Choose a code in your mind between 2-8 digits. Push the S (set) button [Fig-DJ and quickly (within 5 seconds)…
… type in your code and push the(unlock) button on the keypad. [Fig-E]

Left/Right Handed Setting Set to “1” for Right Handed Door Set to “2” for Left Handed Door wront setting will cause the lock to work in reverse

Programming Additional Codes

Follow steps  2 and 4 above. You may add up to 6 user codes.
NOTE: Check your code by pushing the [rd (lock) button on the keypad; it should lock.  Then type in your code and push (f(unlock); your lock should unlock.

You don’t need  a code  to LOCK; just press the [ (lock) button

Deleting codes

• To delete all codes· Press and hold the C (cancel) button until you hear 2 beeps (may take up to 1 O seconds) [Fig-CJ

• To delete individual codes: Press and release the C (cancel) button, listen for one beep [Fig-CJ, enter the code you want to delete on the keypad, then press the m’ (unlock) button [Fig-El

Help hotline:1–800–355-0157

Operating instructions

• TO LOCK:
  Press the Lock Button ()  on the keypad.

• TO UNLOCK:
  Enter your code, then press the Unlock Button () on the keypad.

• TO LIGHT KEYPAD: Push the “Mi” logo button at top of keypad.

Note: To enable the keypad lock functions you will first need to program your new lock.

Warranty  

• Lifetime Warranty on Exterior Finish
• 25 Years Mechanical Warranty
• 1   Year Limited Electrical Warranty

Mi Products Corporation warrants to the original residential user of this product that it will be free from defects in materials and workmanship,  under normal use, for 1   year from the date of purchase.  User must provide a copy of original purchase receipt. This Warranty Does Not Cover abuse or misused products or products used in commercial applications. All mechanical components carry a limited warranty, for a period of 25 years from the date of purchase. The Finish of the exterior of this lock carries a limited warranty of the lifetime of the unit against deterioration due to normal weather conditions. This warranty does not apply to locks that have been improperly installed, modified,  put to a use other than designed, or subjected to acts of God (such as floods, lightning, earthquakes, etc.) This warranty is limited to repairing or replacing of this lock only at MiProducts Corporation’s sole discretion.  MiProducts Corporation will NOT be liable for the cost of installing, removing,  nor reinstalling this product, nor direct,  indirect, or consequential damages to persons or property resulting from the use of this product.

To implement this warranty, please enclose a copy of your purchase receipt, contact phone number, and a check or money order of $10 if shipping to US,  $20 if shipping to Canada.   Please inquire for shipping to other territories.

Please return the lock with the above information with S&H charge freight prepaid to: MiProducts Corp Attn: Returns Dept. 270 S. 5th Ave. La Puente, CA 91746

MiLocks Programming Operating Instruction Manual – Download [optimized]
MiLocks Programming Operating Instruction Manual – Download