Insta Chop Food Processor
“
Specifications:
- Size: 89x120mm
- Design: Unique appearance design
- Knife Design: + shape 4-piece knife design
- Material: Transparent glass / stainless steel chopped cup
- Cleaning: Detachable parts, easy to clean
- Operation: High and low grade design for multiple choices
Product Usage Instructions:
Component and Installation:
1. Assemble the high level button, lock key, host, cup cover,
chopper, chopping cup, and coaster as per the installation
drawing.
Maintenance:
- After use, unplug the power plug promptly.
- Clean all parts with detergent and sponge, avoiding hard steel
wire to prevent damage. - Do not immerse the entire machine in water; wipe the outer
surface with a wet towel. - For long periods of non-use, clean the product, store in the
packaging box in a ventilated dry place.
Analysis of Common Problems:
- Power on does not work: Check voltage; Motor
overload automatic stop protection may activate. - Machine shutdown during use: Allow motor to
cool down; Check voltage. - The motor smells bad after several times of
use: Normal initial use of new motor; If persists, seek
maintenance. - Abnormal vibration or noise: Check for
unstable product placement; Excessive food may cause this. - The lid of the chopped cup is not closed:
Ensure cutter head is installed correctly; Check product stability
and voltage.
User Manual:
Functional Characteristics:
- Unique appearance design
- + shape 4-piece knife design for outstanding mincing
effect - Safety switch design for controlled food chopping
- Transparent glass / stainless steel chopped cup for easy
cleaning - Detachable parts for easy cleaning
- High and low-grade design for multiple choices
Usage Method:
- Clean the chopping cup, knife, and cup cover as per maintenance
guidelines. - Place the shredding on a flat, clean, and dry surface after
disassembling the parts. - Ensure correct placement of the cutter on the shaft in the
center of the chopping cup. - Refer to food mixing guide, add appropriate food to the cup
ensuring proper positioning of the chopper. - Cover the cup with the cover, assemble the body on top,
ensuring proper placement. - Hold the body, press the switch (I or II) to start operation,
release to stop. Refer to cutting and stirring food guide for
duration.
Frequently Asked Questions (FAQ):
Q: What should I do if the power does not turn on?
A: Check the voltage and ensure there is no motor overload
automatic stop protection activated.
Q: How do I clean the product?
A: Use detergent and sponge to clean all parts; do not use hard
steel wire. Do not immerse the entire machine in water; wipe outer
surfaces with a wet towel.
“`
89xl20mm
(DWARNING
In order to avoid inJury caused by misuse, the user’s Manual shall be read carefully before using the product, and the product shall b e used in strict accordance with t h e purpose of the manual.
·
Thank you for using the multi-function food processor. This product is one of the series products independently t’ developed by our company for food processing. It has · unique shape, high a n d low design, convenient cleaning. It is a good helper for family kitchen. This product can cut many kinds of food, making you more comfortable in making food. The container of this product is food grade glass or food grade stainless steel cup, making food more healthy and sanitary.
Component and installation drawing
1
“II” high level button
-” l ” l o wk e y
Po
–H o s t
co
– Cupcover
Chopper
-C h o p p i n g cup
c=3
Coaster
Note: the product picture is slightly different from the actual product, please refer to the actual product.
Maintenance and maintenance
1. After use, please unplug t h e t l power plug from the power
socket in time.
M
2. All parts can be cleaned with detergent and sponge. Do not use hard steel wire to clean so as not to damage the surface.
3. Do not immerse the whole machine in water. The outer surface of the product can only be wiped with a wet towel. Do not wash it with water to avoid leakage and failure.
4. When the product is not used for a long time, please clean it, put it in the packing box, and put it in a ventilated and dry place to avoid being affected by moisture and affecting the use.
Analysis of common problems
Fault phenomenon
Power on does not work
Machine shutdown during use
The motor smells bad after several times of use
Abnormal vibration or noise
I I · II
The lid of the chopped cup is not closed
Cover the chopped cup
1. The voltage is too low; 2. Motor overload automatic stop protection
Normal initial use of new motor
1. Check the voltage; 2.It is recommended to leave the machine for 30 minutes before starting the machine.
If there is still a bad smell after repeated use, please sendCheck at the maintenance point.
1. The cutter head is not
installed in place. 2. Unstable product
placement 3. High voltage
4. Excessive food
1. Take out the food materials and install the knife rest in place.
2. Stable product placement 3. Check whether the voltage is
too high 4. Turn off the power and take out
the excess food.
INSTACHOP
User Manual
Functional characteristics
1. Unique appearance design; 2 . T h e ” +” shape 4-piece knife design makes the mincing effect more outstanding. 3. Safety switch design, control the degree of food chopping at will, and use it safely; 4. Transparent glass / stainless steel chopped cup, healthy and sanitary, easy to clean; 5. Detachable parts, easy to clean; 6. High and low grade design, multiple choices.
Usage method
{-)OPERATION STEPS
6 Beforeuse,cleanthechopping cup, chopping knife and cup cover according to the cleaning 1 and maintenance guidelines;
Takeoff thebodyand cup
cover, and place the shredding in a flat, clean and dry place;
2
!
Makesurethat the cutter 1scorrectly placed ontheshaftinthecenterof the chopping cup,
3
6 Refertothefoodmixingguideoftheqlopping cup andputtheappropriatefoodintothecup. lfthepositionofthechopperdeviatesafter.the offothoedcishpouptpinetorttoheencsuupr,peltehaastethseeattbhoepveopsiotimont
Jcanbemet.
4
MCover the cupcover, then putthebodyonthecup
cover, check whether it is placed properly, and ensure
thatthebodyand thecutter and the cupcover are
assembled in place:
5
Hotd the bodybyhand,pressthe switch (I or 11),the machine starts to work, release the switch, and the machine stopsworking. Thecutting time shoutdrefer to the cutting and stirring food guide. Consumers can
7 shorten the cuttingtime accordingto their preferences
forthecuttingeffectoffood.
6
BE CAREFUL:
In ordertoextendtheservicelifeoftheproduct, the longest working time at a time shall not exceed 30 seconds. If the cutting is not completed after 30 seconds, pleaselet theproductrest for 2minutesbefore continuing to work.
After releasing the switch, please do not take off the bodyimmediately. After the blade stopsrotating, pull 6ut the plug and cut off the power, then take off the body.
8
Open the lid ofthecup,takeoutthechopper first and then take out the food (the chopper is very sharp, take care not to cut hands or other parts of the human body).
9
Reminder
Please do not put water or food materials higher than 50 ‘C into the glass for processing, so as to avoid heat damage of the glass body and water leakage.
{=)GUIDELINES FOR CHOPPING AND MIXINµ FOOD
In order to prolong the service life of the machine and obtain good chopping effect, please refer to the following “chopping and mixing food guide” for correct use.
8 uqup
G)Razor blade
@ L a y food
@ Assemble the cup
cover and fully fit
the cup
@Pressthe main engine firmly by hand and start the machine
food
weight
BEEF/ PORK
< 300g(cut into about 20x20xSOmm small pieces first)
Longest time of chopping and mixing
30s
Remarks
Need to remove bone, skin and tendons Using the high gear switch
GARLIC
300g
155
Using the low switch
CHILI PEPPERS
300g
CARROT
< 300g (cut into about 20x20x20mm small pieces first)
CELERY
300g
lSs
Using the low switch
15s
Using the low switch
155
Using the low switch
Reminder
After use, add a small amount of warm water into the chopping cup, and then add some detergent. After starting the machine for more than ten seconds, it can be easily cleaned.
Matters needing attention
1.Do not use power supply other than AC 120V, otherwise there is a risk of electric shockor fire.
2. Hold the power cord plug by hand and insert the power cord plug into the power socket smoothly. 3. Hold the power cord plug by hand, and pull the power cord plug out of the power plug socket smoothly. 4. Do not use iron hard objects to scratch the machine. 5. After the machine is used, the power cord plug must be pulled out, otherwise electric shock, electric leakage and fire may occur. 6.This product can not be used to process hard things, such as meat with bones, coffee beans, pepper, pepper, ice or frozen food. 7. The temperature range of chopping: 0-50 °c, it is strictly prohibited to put the chopping cup into the microwave oven for heating, or put something beyond its temperature range in the cup. 8.Before adding food, please check whether the blade is installed in place and operates freely. If the blade cannot rotate or rotates slowly, please pull out the plug first and check. 9 . After adding food, please check whether the chopper deviates from the correct position. If the blade fails to operate quickly within a few seconds, please unplug the plug first, level or take out too much food, and then continue to power on. 10. The blade is very sharp, please do not touch the blade directly with your hand, and hold the knife bar on the blade when removing and installing. 11. The continuous working time of the’product shall not exceed 30 seconds. After 30 seconds of continuous working, the product can only be used after 2 minutes of rest. Take the 30 second interval of 2 minutes as a cycle, and work for 3 consecutive cycles. The interval must be 15 minutes, and then work after the motor cools down. 12. If the power cord is damaged, in order to avoid danger, it must be replaced by professionals from the manufacturer, its maintenance department or similar departments. 13. The blade of the machine is sharp. Be careful when taking out the blade, emptying the mixing basin and cleaning. 14. If the product stops working during operation, it may be caused by temperature control
protection of the motor, please turn off the power supply and wait for cooling for 20-30 minutes before using. 15. The product should be stored in a place where children’svoice cannot be touched. Do not let people (including children) who are not physically sound, feel or mentally handicapped or lack relevant experience and knowledge use or play with the product.
Quickly register your product at www.lCIA.com to secure your
1-Year Warranty
Any questions about this product, please don’t hesitate to contact us.
Sales.lgia NY@gmail.com
Documents / Resources
 |
Milex Insta Chop Food Processor [pdf] User Manual Insta Chop Food Processor, Insta Chop, Food Processor, Processor |