Milesight VE0601-A VMS Enterprise Server

Product Information

The VE0601-A/VE0602-A is an Enterprise NVR (Network Video Recorder) designed for professional video surveillance applications. It features multiple interfaces for connectivity and supports up to 4*2.5Gbps LAN for high-speed data transfer.

Specifications:

• Model: VE0601-A/VE0602-A
• Weight: 200g + 80g
• Dimensions: 120x85mm
• Model Number: 43.005.000xx V3.0

Product Usage Instructions

1. Packing List:
   Ensure all the following items are included in the package:
   • Enterprise NVR x1
   • Quick Start Guide x1
   • Warranty Card x1
   • Power Cord x1
   • HDD Screw x28
   • Mounting Bracket x2
   • Mounting Bracket Screw x8
   • SATA Cable x6
2. Hardware Introduction:
   The hardware includes USB ports, a power button, a DP port, USB 3.0 ports, a power LED, an HDMI port, a CLR CMOS button, LAN ports, an audio port, and power input.
3. Installation:
   Use a cross screwdriver to remove the screws at the rear panel in an anticlockwise direction.

FAQ:

• Q: Where can I download software and files for the VE0601-A/VE0602-A?
  A: All software and files can be downloaded from here.
• Q: How many LAN ports does the NVR have?
  A: The NVR has 4*2.5Gbps LAN ports for high-speed connectivity.

All software & files can be downloaded from https://www.milesight.com/support/download/.

Packing List

Hardware Introduction

Interface

1. USB 2.0
2. DP Port
3. 2*USB 3.0
4. Power LED
5. HDMI Port
6. CLRCMOS Button
7. 4*2.5Gbps LAN
8. Audio
9. Power

Installation

Step 1:
Using a cross screwdriver to remove the screws at the rear panel in an anticlockwise direction.

Step 2:
Slide the upper casing to the right first and lift it up.

Step 3:
Using the screwdriver to remove two screws in the middle of the HDD bracket in an anticlockwise direction.

Step 4:
The HDD bracket is rotatable and can be taken down by pulling up and rotating one side of it.

Step 5:
Secure the HDD with 4 screws. Don’t screw tight and leave about 1mm distance at the side of each screw nut. As the enlarged drawing shows:

Step 6:
After securing each HDD with 4 screws, stuck the side with screw nuts in the bracket’s slots and then slide down to fix the HDD in the bracket. Screw tight with screwdriver.

Step 7:
Repeat the above steps to install the HDD in the bracket. Remember to check if you have screwed tight.

Step 8:
Secure the all screws in HDD and fix the bracket with a screw in the middle of it. Then connect the power cable and data cable to each HDD.

Step 9:
Pull down the upper casing and slide it to the left.

Step 10:

Device Connection Topology

Specification

client

• Model VE0601-A/VE0602-A
• Material 200g coated paper +80g Double offset paper
• Size 120x85mm
• Craftsmanship Cover covered with matte film (page-turning version)
• Encoding 43.005.000xx
• Edition book V3.0

Ready to Start
When the Machine is connected to a power source, it will power up automatically(Power-up recovery is enabled by default).

www.milesight.com.

Documents / Resources

Milesight VE0601-A VMS Enterprise Server [pdf] User Guide VE0601-A, VE0602-A, VE0601-A VMS Enterprise Server, VE0601-A, VMS Enterprise Server, Enterprise Server, Server

References

• User Manual