WSTHD-800-01-DS Radio Temperature and Humidity Sensor
Product Information
The WSTHD-800-01-DS is a radio temperature and humidity sensor that measures the temperature and humidity in a given area. The device has a measuring range of -40oC to 85oC for temperature and 0% to 100% for humidity. It has an accuracy of 0.1oC for temperature measurement and a resolution of humidity measurement.
The device is powered by a 3.6V lithium battery that has a battery life of not less than 2 years. It has an operating frequency of 868.4 MHz and an internal measuring buffer of 136 hours recording every 1 minute. The device has a degree of protection of IP65, polycarbonate and is EMC compliant.
Product Usage Instructions
To use the WSTHD-800-01-DS radio temperature and humidity sensor, follow the steps below:
- Install the device by mounting it on a wall or any other surface in the desired location.
- Ensure that the device is within the operating conditions for the housing sensor, which is a temperature range of -30oC to 85oC and humidity range of 0% to 75%.
- Turn on the device by inserting the 3.6V lithium battery.
- Wait for the device to start recording data, which can be up to 136 hours recording every 1 minute.
- To access the recorded data, connect to the device using the operating frequency of 868.4 MHz.
- If necessary, replace the battery after not less than 2 years of use.
For further information or assistance, please refer to the product manual or contact MIKSTER Sp. z o.o. at info@mikster.pl.
WSTHD-800-01-DS Radio temperature and humidity sensor
DESCRIPTION
A radio temperature and humidity sensor is a measurement module, the reading of which is possible through a radio connection. Its use is recommended in places where creating a wired installation is difficult or inadvisable. The sensor enables a continuous registration of temperature and humidity up to 136 hours
with a frequency of registration every 1 minute. The sensor’s registration can be read by a radio recording unit connected to a computer with LOGGISOFT software installed. Built-in LCD display facilitates operating the device and enables local visualization of the measurements.
Sensor dimensions WSTHD-800-01-DS:
| Technical data | |
| Measuring range of the probe temperature | –40oC..85 oC |
| Accuracy of the probe measurement for the temperature range | ±0,5 oC (-20°C .. +85°C)
±2 oC (-40°C .. -20°C) |
| Measurement resolution temperature | 0,1 oC |
| Probe measuring range humidity | 0..100% (-30oC..85 oC) |
| Accuracy of humidity measurement | ±3% RH (in the range 15..85%)
±3..5% RH (in the remaining range) |
| Resolution of humidity measurement | 1,0% |
| Power | Lithium battery 3.6V |
| Battery life | Not less than 2 years |
| Operating conditions for the housing sensor | -30°C .. +85°C Humidity: 0..75% |
| Storage conditions | Temperature: -30oC..85 oC Humidity: 0..75% |
| Electromagnetic compatibility (EMC) | Immunity acc. to PN-EN61000-6-2 |
| Data transmission | Operating frequency 868.4 MHz |
| Internal measuring buffer | 136 hours (recording every 1 minute) |
| Installation data | |
| External dimensions | Housing: 82x80x60mm (W/HD) with antenna and temperature sensor 82x234x60mm |
| Weight | 210g |
| Dimensions of temperature and humidity probe | Długość 48mm, średnica ø19,5mm Length 48mm, diameter ø19.5mm Length 75mm*, diameter ø19.5mm |
| Mounting | 4 holes ø4,2mm spacing 70mm
heigh*tS5o0nmd mna przewodzie o długości 2,5m |
| Degree of protection, housing | IP65, polycarbonate |
Website: www.mikster.com.pl
Address: MIKSTER Sp. z o.o. 41-250 Czeladź, ul. Wojkowicka 21, tel. 32 763 77 77
Fax: 32 763 75 94
Email: info@mikster.pl
Documents / Resources
 |
MIKSTER WSTHD-800-01-DS Radio Temperature and Humidity Sensor [pdf] Owner's Manual WSTHD-800-01-DS Radio Temperature and Humidity Sensor, WSTHD-800-01-DS, Radio Temperature and Humidity Sensor, and Humidity Sensor, Humidity Sensor |
