Miele CVA 7440 Built in Coffee Machine Instruction Manual

The built-in coffee machine is designed for convenient coffee
brewing within your home. It features a range of settings for
energy-saving and environmental care. The appliance is equipped
with safety features to prevent accidents and ensure correct
usage.

Product Usage Instructions:

Caring for the Environment:

Dispose of packaging material at designated collection points to
promote recycling and reduce raw material usage. Do not dispose of
the old appliance with household waste; follow proper disposal
guidelines.

Saving Energy:

Operate in Eco mode by default.

Turn off unnecessary lighting.
Adjust display settings to reduce energy consumption.

Use the On/Off sensor control to switch off when not in
use.

Warning and Safety Instructions:

Correct Application: Prevent children from
touching hot surfaces or dispensing spouts to avoid burns. Do not
open the outer casing to prevent operational faults or electric
shock.

Technical Safety: Avoid direct exposure to
lighting to prevent eye injuries. Use only cold, fresh tap water
that meets drinking water standards.

Appliance Description:

a – On/Off button

b – Control panel
c – Door handle

d – Height-adjustable central spout with lighting
e – Drip tray cover

f – Milk flask

FAQ:

Q: Can I use hot water to fill the water container?

A: Only use cold, fresh tap water to fill the water container to
ensure proper functioning of the coffee machine.

Q: How do I dispose of the old appliance?

A: Do not dispose of the old appliance with household waste.
Follow proper disposal guidelines to prevent harm to human health
and the environment.

“`

View Fullscreen

Operating and installation instructions Built-in coffee machine

To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.

en-GB, IE

M.-Nr. 12 859 930

Caring for the environment

Disposing of the packaging material
The packaging material is used for handling and protects the appliance from transport damage. The packaging material used is selected from materials which are environmentally friendly for disposal and can generally be recycled. Recycling the packaging material reduces the use of raw materials. Use material-specific collection points for valuable materials and take advantage of return options.

Disposing of your old appliance
Electrical and electronic appliances contain many valuable materials. They also contain certain materials, compounds and components which were essential for their correct functioning and safety. These could be hazardous to human health and to the environment if disposed of with household waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with household waste.

Saving energy

The following tips can help you save energy and money as well as care for the environment:
– Operate the coffee machine in Eco mode (default setting).
– Switch off the time of day display. – Select dimmer lighting or refrain from
using any lighting. – Switch off the lighting when the
appliance is switched off. – Select the dark colour scheme for the
display. – Reduce the brightness of the display. – If you change the factory default
settings for the “Timer”, this can increase the energy consumption of the coffee machine. – Pay particular attention to the following message on the display: This
setting uses more energy.
– Switch the coffee machine off with the On/Off sensor control if it is not going to be used for a while.

Instead, please make use of officially designated collection and disposal points to dispose of and recycle electrical and electronic appliances in your local community, with your dealer or with Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged to remove any old batteries which are not securely enclosed by the appliance and to remove any lamps without destroying them, where this is possible. These must be taken to a suitable collection point where they can be handed in free of charge. Please ensure that your old appliance poses no risk to children while being stored for disposal.

Contents
Caring for the environment …………………………………………………………………………….. 2 Saving energy…………………………………………………………………………………………………… 2 Warning and Safety instructions ……………………………………………………………………. 7 Appliance description ……………………………………………………………………………………. 14 The milk container ……………………………………………………………………………………………. 16 Central spout with cup rim sensor …………………………………………………………………… 16 Controls and indicators ………………………………………………………………………………….. 18 Symbols in the display……………………………………………………………………………………… 19 Drink button symbols……………………………………………………………………………………….. 20 Operation ………………………………………………………………………………………………………… 21 Selecting a menu and navigating within a menu ………………………………………………. 21 Miele@home ………………………………………………………………………………………………….. 23 Before using for the first time…………………………………………………………………………. 24 Before using for the first time…………………………………………………………………………… 24 Switching on for the first time ………………………………………………………………………….. 24 Filling the coffee bean container ……………………………………………………………………. 26 Filling the water container………………………………………………………………………………. 27 Switching on and off……………………………………………………………………………………….. 28 Switching the coffee machine on……………………………………………………………………… 28 Switching the coffee machine off …………………………………………………………………….. 28 Preparing for an extended period of inactivity ………………………………………………….. 28 Making drinks …………………………………………………………………………………………………. 29 Coffee………………………………………………………………………………………………………………. 29
Coffee drinks in detail …………………………………………………………………………………. 29 Milk and milk alternatives……………………………………………………………………………. 29 Filling and inserting the milk container………………………………………………………… 30 Making a coffee…………………………………………………………………………………………… 31 Cancelling a drink………………………………………………………………………………………… 31 Making a DoubleShot of coffee …………………………………………………………….. 31 Making 2 portions ………………………………………………………………………………….. 31 Preparing a pot of coffee …………………………………………………………………………….. 32 Tea …………………………………………………………………………………………………………………… 32 Making tea ………………………………………………………………………………………………….. 33 Starting the TeaTimer manually …………………………………………………………………… 33 Preparing a pot of tea………………………………………………………………………………….. 34 Dispensing warm or hot water …………………………………………………………………………. 34 Changing the portion size ………………………………………………………………………………… 34
3

Contents
Expert mode……………………………………………………………………………………………………. 36 Switching Expert mode on and off……………………………………………………………………. 36 Expert mode: changing the portion size …………………………………………………………… 36 Degree of grinding ………………………………………………………………………………………….. 37 Identifying the ideal degree of grinding…………………………………………………………….. 37 Adjusting the degree of grinding ………………………………………………………………………. 37 Parameters ……………………………………………………………………………………………………… 38 Displaying and changing parameters ……………………………………………………………….. 38 Portion size………………………………………………………………………………………………………. 38 Quantity of coffee…………………………………………………………………………………………….. 38 Brewing temperature for coffee drinks……………………………………………………………… 38 Dispensing temperature for tea drinks, warm water and hot water ………………….. 39 Pre-brewing the ground coffee…………………………………………………………………………. 39 Profiles…………………………………………………………………………………………………………….. 40 Profiles …………………………………………………………………………………………………………….. 40 Creating a profile ……………………………………………………………………………………………… 40 Editing a profile ………………………………………………………………………………………………… 40
Setting when the profile should change………………………………………………………. 40 Changing the profile name ………………………………………………………………………….. 40 Deleting the profile ……………………………………………………………………………………… 41 Making drinks stored in a profile ………………………………………………………………………. 41 Changing drinks within a profile ……………………………………………………………………….. 41 MobileStart …………………………………………………………………………………………………….. 42 Preparing MobileStart ……………………………………………………………………………………… 42 Switching MobileStart on and off …………………………………………………………………….. 42 Settings …………………………………………………………………………………………………………… 43 Displaying and changing Settings…………………………………………………………………….. 43 Language………………………………………………………………………………………………………….. 43 Time…………………………………………………………………………………………………………………. 43 Date …………………………………………………………………………………………………………………. 43 Timer ……………………………………………………………………………………………………………….. 43 Switch on at………………………………………………………………………………………………… 43 Switch off at ……………………………………………………………………………………………….. 44 Switch off after……………………………………………………………………………………………. 44 TeaTimer ………………………………………………………………………………………………………….. 44 Volume …………………………………………………………………………………………………………….. 44 Display brightness……………………………………………………………………………………………. 44 Lighting…………………………………………………………………………………………………………….. 44 Info (display information) …………………………………………………………………………………. 45 Altitude…………………………………………………………………………………………………………….. 45
4

Contents
Performance mode…………………………………………………………………………………………… 45 Eco mode ……………………………………………………………………………………………………. 45 Barista mode ………………………………………………………………………………………………. 45 Latte mode………………………………………………………………………………………………….. 45 Party mode …………………………………………………………………………………………………. 45
Water hardness………………………………………………………………………………………………… 46 System lock …………………………………………………………………………………………………. 47 Miele@home …………………………………………………………………………………………………… 47 Performing Scan & Connect…………………………………………………………………………….. 48 Remote control ………………………………………………………………………………………………… 48 RemoteUpdate ………………………………………………………………………………………………… 48 Software version………………………………………………………………………………………………. 49 Showroom programme (Demo mode) ……………………………………………………………… 49 Factory defaults ……………………………………………………………………………………………….. 50 Cleaning and care …………………………………………………………………………………………… 51 Overview of cleaning intervals………………………………………………………………………….. 51 Cleaning by hand or in the dishwasher …………………………………………………………….. 52 Unsuitable cleaning agents………………………………………………………………………………. 53 Opening the appliance door …………………………………………………………………………….. 53 Cleaning the drip tray and grounds container …………………………………………………… 54 Cleaning the drip tray cover ……………………………………………………………………………… 55 Cleaning the water container……………………………………………………………………………. 56 Cleaning the central spout ……………………………………………………………………………….. 56 Cleaning the cup rim sensor …………………………………………………………………………….. 58 Cleaning the milk container with lid …………………………………………………………………. 58 Cleaning the milk valve (daily) ………………………………………………………………………….. 59 Removing and cleaning the milk valve (once a month)……………………………………… 59 Cleaning the bean containers …………………………………………………………………………… 62 Cleaning the brew unit and interior by hand …………………………………………………….. 63 Cleaning the interior, inside of the appliance door and drip tray……………………….. 65 Cleaning the appliance front…………………………………………………………………………….. 65 Maintenance programmes……………………………………………………………………………….. 66 Opening the Maintenance menu ……………………………………………………………………… 66 Rinse the appliance………………………………………………………………………………………….. 66 Rinse the milk pipework …………………………………………………………………………………… 66 Cleaning the milk pipework………………………………………………………………………………. 66 Degreasing the brew unit …………………………………………………………………………………. 67 Descaling the machine …………………………………………………………………………………….. 69 Problem solving guide…………………………………………………………………………………….. 71 Messages in the display …………………………………………………………………………………… 71 Unusual performance of the coffee machine……………………………………………………. 73 Unsatisfactory results………………………………………………………………………………………. 76
5

Contents
After sales service and warranty ……………………………………………………………………. 78 Contact in the event of a fault ………………………………………………………………………….. 78 Warranty ………………………………………………………………………………………………………….. 78 Accessories …………………………………………………………………………………………………….. 79 Installation………………………………………………………………………………………………………. 80 Electrical connection ………………………………………………………………………………………. 80 Building-in dimensions ……………………………………………………………………………………. 81
Installation in a tall unit ……………………………………………………………………………….. 81 Installation and connections ……………………………………………………………………….. 82 Building in the coffee machine …………………………………………………………………………. 83 Door opening limiters ………………………………………………………………………………………. 85 Technical data …………………………………………………………………………………………………. 86 EU Conformity declaration……………………………………………………………………………… 87 UK Conformity declaration …………………………………………………………………………….. 88 Copyrights and licences …………………………………………………………………………………. 90
6

Warning and Safety instructions
This coffee machine complies with all the stipulated safety requirements. Inappropriate use can, however, lead to personal injury and material damage. Read the operating instructions carefully before using the coffee machine. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the coffee machine. In accordance with standard IEC 60335-1, Miele expressly and strongly advises you to read and follow the instructions in the chapter on installing the coffee machine as well as the safety instructions and warnings. Miele cannot be held liable for injury or damage caused by noncompliance with these instructions. Keep these operating instructions in a safe place and pass them on to any future owner.
7

Warning and Safety instructions Correct application
This coffee machine is intended for home use. This coffee machine is not intended for outdoor use. This coffee machine must not be used at altitudes above 2000 m. It must only be used as a domestic appliance to make espresso, cappuccino, latte macchiato, tea etc. Any other use is not permitted. This coffee machine can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised whilst using it, or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation.
8

Warning and Safety instructions
Safety with children
Danger of burning and scalding on the dispensing spouts. Children’s skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts.
Install the coffee machine where it is out of the reach of children. Children under 8 years of age must be kept away from the coffee machine unless they are constantly supervised. Children aged 8 and older may only use the coffee machine without supervision if they have been shown how to use it in a safe manner. Children aged 8 and older must be aware of the potential dangers caused by incorrect operation. Please supervise children in the vicinity of the coffee machine and do not allow them to play with it. Young children must not be allowed to clean the coffee machine at all. Cleaning may only be carried out by children 8 years of age or older under the supervision of an adult. Remember that coffee and espresso are not suitable drinks for children. Danger of suffocation! Whilst playing, children may become entangled in packaging material (such as plastic wrapping) or pull the packaging material over their head, presenting the risk of suffocation. Keep packaging material away from children.
Technical safety
Installation work or repairs should only be carried out by a Miele authorised technician. Unauthorised or incorrect installation work or repairs can pose considerable danger to users. A damaged coffee machine could be dangerous. Before building in the machine, check it for any externally visible damage. Do not use a damaged machine. To avoid the risk of damage to the machine, make sure the connection data (voltage and frequency) on the data plate corresponds to the household supply, before connecting the machine to the mains supply. Consult a qualified electrician if in any doubt.
9

Warning and Safety instructions
The electrical safety of this coffee machine can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt please have the electrical installation tested by a qualified electrician. Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of BS OHSAS 180012 ISO 45001. Do not connect the machine to the mains electricity supply by a multi-socket adapter or an extension lead. These are a fire hazard and do not guarantee the required safety of the appliance. The coffee machine must not be used in a non-stationary location (e.g. on a ship). For safety reasons, this machine may only be used when it has been built in. If the coffee machine is to be built in above another appliance, there must be a full-width, closed intermediate shelf between them (except when it is combined with a Gourmet drawer or a built-in vacuum drawer). Only use the coffee machine in rooms where the ambient temperature is between +16 °C and +38 °C. A minimum installation height of 850 mm must be observed. This coffee machine must not be installed behind a closed cabinet door because heat and moisture can build up behind it. This can result in damage to the machine and/or furniture unit. The coffee machine must be disconnected from the electricity supply during repair work. While the machine is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty is invalidated.
10

Warning and Safety instructions
Never open the outer casing of the machine. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults or electric shock.
Correct use
Danger of burning and scalding on the dispensing spouts. The liquids and steam dispensed are very hot. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components. Hot liquid or steam could spatter from the nozzles. Ensure that the central spout is clean and fitted correctly. Before opening the door, remove any containers from the drip tray in the machine door. Water in the drip tray can also be very hot. Take care when emptying it.
Danger of injury to the eyes. Never look directly at the lighting or use optical instruments to look at it.
Please note the following regarding water: – The water quality must conform to the requirements for drinking
water in the country in which the coffee machine is being used. – Only use cold, fresh tap water to fill the water container. Hot or
warm water or other liquids can damage the coffee machine. – Change the water every day to prevent a build-up of bacteria. – Do not use carbonated water. Only put roasted coffee beans in the bean containers. Do not place coffee beans which have been treated with additives or ground coffee inside the bean containers. Do not fill the bean containers with any type of liquid. Do not use green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins.
11

Warning and Safety instructions
Do not use coffee beans which have been treated with caramel, sugar or other substances including sugary liquids. Sugar will damage the coffee machine. Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework. If using dairy milk make sure that it has been pasteurised. When making tea, please follow the instructions on the packaging. Do not place flaming alcohol mixtures underneath the central spout. The flames could ignite plastic components and cause them to melt. Do not swing from or hang anything on the machine front when it is open as this could damage the hinges on the coffee machine. The machine must not be used for cleaning objects. Make sure that the coffee machine does not come into contact with hand sanitiser gel or sunscreen, as this will damage the surfaces. Accessories and spare parts Miele can only guarantee the safety of the machine when original Miele spare parts are used. Faulty components must only be replaced by genuine Miele original spare parts. Only use original Miele accessories. If other parts are used, warranty, performance and/or product liability claims will be invalidated. Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your coffee machine. Cleaning and care Clean the coffee machine and the milk flask daily, particularly before using them for the first time. All parts of the milk system need to be cleaned thoroughly and regularly. Milk contains bacteria which proliferate rapidly with inadequate cleaning.
12

Warning and Safety instructions
Descale the coffee machine regularly depending on the water hardness level in your area. Descale the machine more frequently in areas with very hard water. Miele cannot be held liable for damage arising from insufficient descaling, the use of incorrect descaling agent or the use of descaling agent which is not of the appropriate concentration. Degrease the brew unit regularly with Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Do not use a steam cleaner to clean this machine. Steam could reach electrical components and cause a short circuit. Used coffee grounds should be disposed of with the organic rubbish or on the compost heap. Do not empty them down the sink, as they could block it. For machines with stainless steel surfaces: Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the stainless steel surfaces. These will damage the stainless steel surfaces, causing them to lose their dirtrepellent protective coating. The finish on stainless steel surfaces is susceptible to scratching. Even magnets can cause scratching. Stainless steel surfaces are susceptible to scratching. Even magnets can cause scratches.
13

Appliance description

Exterior view

3 4 6
5
a On/Off button b Control panel c Door handle d Height-adjustable central spout with lighting e Drip tray cover f Milk flask

Interior view

Appliance description

a Bean container b Milk valve c Height-adjustable central spout with lighting d Grinder setting e Bean container f Fan outlet g Water container h Drip tray with lid i Brew unit j Waste container k Maintenance container l Drip tray
15

Appliance description
The milk container
a Lids b Milk suction tube c Sensor d Glass flask

Central spout with cup rim sensor
The central spout with cup rim sensor features automatic spout adjustment. Thanks to this spout adjustment function, the central spout moves down automatically at the start of a drink preparation process and the cup rim sensor stops it at the optimum height for the cups or glasses being used. The central spout and cup rim sensor cannot be manually adjusted. When the coffee machine is switched off, the central spout will be in the middle position.

When a maintenance programme is being carried out, the central spout will move to the height of the maintenance container or into a low maintenance position.
Make sure that the central spout is in the top or middle position before you open the door.

Appliance description

Controls and indicators

a On/Off button For switching coffee machine on and off
b Drink buttons For making drinks
c Display For showing information about the current action or status
d sensor For making other drinks, e.g. Ristretto, Cappuccino italiano For making a pot of tea or coffee Menu: Settings
e Profiles sensor For creating and managing profiles
f Maintenance sensor Maintenance programmes, e.g.
Descale
g Parameters sensor For displaying or changing drink settings

h OK sensor For confirming display messages and saving settings
i Navigation area with arrow buttons For scrolling through lists, selecting entries or changing values
j “Back” sensor For returning to the previous menu and cancelling unwanted actions
k “2 portions” sensor For dispensing 2 portions of a drink at once
l “DoubleShot” sensor For making a particularly strong and aromatic coffee by using twice as much ground coffee but the same amount of water
m Optical interface (For Miele Customer Service Department only)

Controls and indicators

Symbols in the display
The following symbols may also appear in the display in addition to the text:

Symbol

Explanation This symbol indicates the “Settings” menu and the “Language” menu option. This symbol indicates that there is additional information and advice about using the coffee machine. Select OK to confirm the messages. The symbol is displayed when the system lock is switched on. The controls are locked. The symbol and the desired switching-on time appear in the display 23:59 hours before the coffee machine is due to switch on if the Switch on at timer and the time of day display are activated. The TeaTimer minute minder has been started (see “TeaTimer”). The remaining brewing time is shown next to the symbol. This symbol appears while the appliance is being descaled. This symbol can also be found on the water container: fill up to this mark. This symbol appears during the Clean the milk pipework maintenance programme. (This symbol is also found on the water container: fill up to this mark with water). If Miele@home has been activated for the coffee machine, these symbols represent the quality/status of the WiFi connection, indicating the strength in increments from strong to not connected.
“MobileStart” appears if Miele@home is set up for the coffee machine and MobileStart is switched on.

Controls and indicators

Drink button symbols

Espresso

Coffee

Long coffee

Cappuccino

Latte macchiato

Caffè latte

Hot milk

Milk froth

Tea water

Operation

Sensor controls
To operate the coffee machine, touch the sensor controls with your finger.
An audible signal is generated each time a sensor is touched. You can adjust the volume of the keypad tones or switch the tones off (see “Adjusting settings Volume”).

Drinks menu
When the following appears in the display, you are in the drinks menu: Select drink.

Miele

12:00

Select drink

You can find more drinks in the Further menu ( sensor control).
Navigation area
To select a menu option, keep pressing the arrow buttons and until the option you want is highlighted.

Selecting a menu and navigating within a menu
To select a menu, touch the relevant sensor control, e.g. the sensor control.

Miele

12:00

Settings
Ristretto
Cappuccino Italiano
You will then be able to start an action or change settings in the menu. A bar on the right-hand side of the display indicates that further options or text are available. The setting that is currently selected in a list will have a tick beside it.
Exiting a menu or cancelling an action
To exit the current menu, touch the sensor. Alternatively, touch the lit orange sensor again to return to the drinks menu.

To scroll more quickly through the options, swipe your finger right or left in the area between the arrows. As soon as you reach a confirmable value, message or setting, the OK sensor will light up orange. Touch OK to confirm your selection.
21

Operation

Entering a name
Letters and numbers are entered via the navigation area. You can choose between upper and lower case letters. Tip: It is best to select short names.

Name Z A B C D E F

– To enter a character, highlight the one you want and confirm your choice with OK.
– To delete a character, touch the sensor control.
– To save the name, select the tick and confirm with OK.

Miele@home

Your coffee machine is equipped with an integrated WiFi module. Before installing the coffee machine at the installation site, ensure that the signal from your WiFi network is strong enough.
To use this feature, you will need: – A WiFi network – The Miele app – A Miele user account (this can be
created from the Miele app)
The Miele app will guide you through the process of connecting your coffee machine to your home WiFi network. Once your coffee machine is connected to your WiFi network, you can use the Miele app to carry out activities such as the following: – Installing software updates – Calling up information on the
operating status of your coffee machine – Changing settings on your coffee machine – Controlling your coffee machine remotely
Connecting your coffee machine to your WiFi network will increase energy consumption, even when the machine is switched off.

Availability of the WiFi connection
The WiFi connection shares a frequency range with other appliances (including microwave ovens and remote control toys). This can give rise to sporadic or even complete connection failures. Therefore, the availability of featured functions cannot be guaranteed.
Miele@home availability
The ability to use the Miele app depends on the availability of the Miele@home service in your country. The Miele@home service is not available in every country. For information about availability, please visit www.miele.com.
Miele App
The Miele App is available to download free of charge from the Apple App Store® or from the Google Play StoreTM.

Before using for the first time

Before using for the first time
Connect the coffee machine to the electricity supply.
Install the coffee machine by building it in.
Remove any notices from the machine.
Remove the protective foil from the drip tray cover.
Clean the water container, the bean containers and the central spout.
Remove the water container and fill it with fresh, cold tap water. Only fill the water container up to the “max.” mark and then refit it in the machine (see “Filling the water container”).
Remove the bean containers and fill them with roasted coffee beans.
Switching on for the first time
Touch the On/Off button .
Selecting the display language Select the desired display language. You might also be asked for your location.
The choice of location determines how the time of day is displayed, e.g. in the 12 or 24-hour format, as well as how units are displayed.
Setting up the network (Miele@home) To receive software updates and operate the coffee machine via the Miele app on your mobile device, you can connect your coffee machine to your home WiFi network. The following appears in the display during commissioning: Set up
“Miele@home”

Tip: You can also set up Miele@home at a later time by scanning the QR code on the inside of the appliance door (see “Setting up Scan & Connect”). In this case, select Skip. Make sure that your WiFi network
signal is sufficiently strong in the coffee machine’s installation site. Touch Continue. Select the connection method you wish to use. Follow the instructions provided in the coffee machine display and in the Miele app. Connection successfully established. will appear in the display. Any new software that is available for your coffee machine will be downloaded via RemoteUpdate the next time the appliance is switched on. In this case, you will be notified that you can install the new software (see “RemoteUpdate” section).
Networking increases the energy consumption of the coffee machine.
Touch OK to proceed with commissioning.
Setting the date Set today’s date. Confirm with OK.
Setting the time of day Set the current time of day. Confirm with OK.
If the coffee machine has been connected to a WiFi network and is signed into the Miele app, the time will be synchronised based on the location setting in the Miele app.

Before using for the first time

Setting the water hardness level
Contact your local water supplier to find out your local water hardness range if necessary. More information can be found under “Settings Water hardness”.
Enter your local water hardness (in °dH) and confirm with OK.

Selecting the Performance mode You can select the appropriate Performance mode to suit your personal preferences (see “Adjusting settings Performance mode”): – Eco mode: This mode consumes the
least amount of energy (default setting). – Barista mode: This mode has been optimised for unadulterated coffee enjoyment. – Latte mode: In this mode, milk-based drinks can be prepared within a much shorter space of time. Select the Performance mode you want. Confirm with OK.
Selecting a Performance mode other than Eco mode increases the energy consumption of the coffee machine.
Your machine has been successfully set up and is ready for use.
To ensure that any coffee residues from the factory testing process are removed from the brewing system, please throw away the first 2 cups of coffee when using the coffee machine for the first time.

Filling the coffee bean container

Coffee or espresso can be made from whole roasted coffee beans which are freshly ground for each portion. This requires the bean containers to be filled with coffee beans.
Risk of damage to the grinder
due to incorrect operation. The coffee machine will be damaged if the bean container is filled with unsuitable substances such as liquids, ground coffee or coffee beans treated with sugar, caramel or similar. In addition, green (unroasted) coffee beans or mixtures of coffee beans which contain green coffee beans can damage the grinder. Green coffee beans are very hard and still contain residual moisture. These can damage the coffee machine grinder as soon as grinding begins. Only put roasted coffee beans in the bean containers.
The coffee machine has 2 bean container drawers on the top left and right. Coffee beans from all 3 bean containers are mixed together during grinding. Open the appliance door.

Take the lids off the bean containers and fill them with coffee beans.
Put the lids back on the bean containers to seal them.
Slide the bean container drawers all the way into the coffee machine.
Close the appliance door.

Pull out the bean containers. 26

Risk to health due to
contaminated water. Bacteria can develop in water which has been sitting in the water container for too long and is a risk to your health. Change the water in the water container every day.
Risk of damage due to incorrect
operation. Unsuitable liquids such as hot or warm water or other liquids can damage the coffee machine. Bottled mineral water leaves too much limescale in the coffee machine. Only use cold, fresh tap water to fill the water container.
Open the appliance door.

Filling the water container

Pull the water container forwards to remove it.
Fill the water container with fresh, cold drinking water up to the max. mark.
Push the water container into the appliance.
Close the appliance door.
27

Switching on and off

Switching the coffee machine on
Touch the On/Off switch . The coffee machine heats up and rinses the pipework. Hot water will run out of the central spout. You can now make drinks.
If the coffee machine is already at operating temperature, rinsing will not take place.

Preparing for an extended period of inactivity
If the coffee machine is not going to be used for more than 3 days, such as during a holiday, proceed as follows: Empty the drip tray, the grounds
container and the water container. Clean all parts thoroughly, including
the brew unit and appliance interior. Switch the coffee machine off.

Switching the coffee machine off
Touch the On/Off switch . If a drink has been dispensed, the coffee machine will rinse the coffee pipework automatically before switching off.
While dispensing a drink or during maintenance processes, moisture builds up in the coffee machine. Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run until the interior is sufficiently dehumidified. You will hear an accompanying noise.

Making drinks

Danger of burning and scalding
on the dispensing spouts. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Do not touch hot components.
Coffee
Coffee drinks in detail You can use the coffee machine to prepare the following coffee-based drinks: – Ristretto is a strong, concentrated
espresso. It is prepared with the same amount of coffee as for an espresso but with a lot less water. – Espresso is a strong aromatic coffee with a thick, hazelnut brown-coloured froth known as the crema on top. We recommend using espressoroasted coffee beans to make an espresso. – Coffee differs from espresso by the increased amount of water and the roast of the beans. We recommend using coffee beans of the correct roast to make the coffee. – Long coffee is a coffee with considerably more water. – Long black is made with hot water and two shots of espresso. – Caffè Americano consists of espresso and hot water. The espresso is made first, then the hot water is dispensed into the cup.

– Cappuccino consists of approx. 2 thirds milk froth and 1 third espresso.
– Latte macchiato consists of 1 third each of hot milk, milk froth and espresso.
– Caffè latte consists of espresso and hot milk.
– Cappuccino italiano has the same proportions of milk froth and espresso as a cappuccino. The difference is that the espresso is added first and then the milk froth.
– Espresso macchiato is an espresso with a small amount of milk froth on top.
– Flat white is a special variety of cappuccino that contains significantly more espresso than milk froth for an intensive coffee aroma.
– Café au lait is a French style of coffee consisting of coffee and milk froth. Café au lait is usually served in a bowl.
Hot milk or milk froth can also be made.
Milk and milk alternatives Cow’s milk or alternative plant-based dairy products (e.g. soy milk) containing added sugar can clog up the milk pipe and the rest of the milk pipework. Residues from unsuitable liquids can interfere with milk preparation. The milk used must not contain any additives.
Dairy milk naturally contains germs. If using dairy milk, make sure that it has been pasteurised, e.g. pasteurised cow’s milk.
29

Making drinks

You can prepare hot milk and milk froth using cow’s milk or alternative plantbased dairy products. However, the consistency of the milk froth will vary greatly depending on the type of milk used. Not all types of milk are suitable for milk froth. As soon as you select a drink containing milk, the machine will start to heat up. The milk will be drawn up into the central spout where it is heated by steam and also frothed for drinks requiring milk froth. Tip: Using cold cow’s milk (< 10 °C) with a protein content of at least 3 % will produce the perfect milk froth. You can select milk with a fat content according to preference. With whole milk (at least 3.5 % fat), the milk froth will be slightly creamier than with lowfat milk.
Alternative plant-based dairy products hereafter referred to as “alternative dairy products” contain different ingredients than cow’s milk, for example. Due to natural settling, alternative dairy products tend to thicken. When preparing hot milk or milk froth, this thicker consistency can prevent the alternative dairy products from being drawn into the milk pipework. Stir alternative dairy products well immediately before preparation. Do not shake alternative dairy products. Shaking causes foam to form in the packaging and impairs the preparation process.
Tip: Rinse the milk pipework manually immediately after preparation.

Filling and inserting the milk container
Milk is not cooled in the milk container. Milk may spoil if it is left in the milk container for an extended period without being cooled (depending on the type of milk). In particular, do not leave cow’s milk in the milk container for an extended period without cooling it. Please follow the manufacturer’s instructions regarding the shelf life of the milk used.
If you have not made any milk drinks for a while, rinse the milk pipework thoroughly before making the first drink.
Tip: For high-quality milk froth, always use cold milk (< 10 °C). If you use alternative dairy products,
make sure that you stir the milk well. To ensure the best preparation, alternative dairy products must be stirred and not shaken. Fill the milk container with milk up to a maximum of 2 cm below the rim. Seal the milk container with the lid.

Push the milk container back into the coffee machine until it clicks into place.
30

Making drinks

Tip: It is easier to remove the milk container again with both hands. Making a coffee
Place a cup under the central spout. If you want to make a coffee with hot
milk or milk froth, prepare the milk container and insert it into the machine. Touch the sensor control for the drink you want. The drink will be dispensed from the central spout into the cup. Cancelling a drink Touch the lit orange symbol on the control panel again.

When preparing drinks with several ingredients (e.g. latte macchiato), you can cancel each of the individual ingredients prematurely. When Stop appears in the display,
confirm with OK.
Making a DoubleShot of coffee Select the DoubleShot function if you would like a particularly strong and aromatic coffee. In this case, more coffee beans will be ground and brewed a second time halfway through brewing. The shorter extraction time means that fewer unwanted aromas and bitter compounds will be released. The sensor control will appear while coffee drinks are being made. Touch the sensor control
immediately before or after you start making a drink. Dispensing starts and the sensor control lights up. 2 portions of coffee beans will be ground and brewed one after the other. DoubleShot can be activated for all drinks apart from “Ristretto” and “Long black”.
Making 2 portions You can dispense 2 portions of a drink into 1 large cup or into 2 cups at the same time.

Making drinks

Place a cup under each of the dispensing spouts in the central spout.
Touch the sensor control immediately before or after you start making a drink.
The sensor control lights up. Dispensing starts and 2 portions of the desired drink will be dispensed.
Preparing a pot of coffee You can make several cups of coffee automatically one after the other with the Coffee pot function (maximum of 1 litre). The drinks menu is displayed. Tip: Make sure that the bean and water containers have enough beans and water inside them before starting the Coffee pot function. Place a sufficiently large container
under the central spout. Touch the sensor control. Select Coffee pot. Confirm with OK. Select the number of cups you would
like (3 to 8). Each portion of coffee will be brewed and dispensed individually. You can follow the process in the display.
32

Cancelling a drink Touch the sensor control.
Tea
If the dispensing temperature is too high or too low or if the brewing time is too short or too long, this can affect the flavour of your tea. Follow the instructions provided by the manufacturer of the tea you are making.
The coffee machine is not intended for commercial or scientific purposes. Dispensing temperatures given are approximate and can vary according to ambient conditions. A temperature increment of approximately 2 °C makes a difference. To make tea, you can select from the following options: – Japanese tea is a high-quality green
tea which boasts a fine, fresh, “green” taste. Dispensed temperature: approx. 65 °C, brewing time: approx. 1.5 minutes – White tea is a green tea where only the young buds of the tea plant are used and processed very gently. White tea has a particularly mild taste. Dispensed temperature: approx. 70 °C, brewing time: approx. 2 minutes – Green tea gets its green colour from the leaves of the tea plant. The tea leaves are either roasted or steamed depending on the region. Green tea can be infused multiple times. Dispensed temperature: approx. 80 °C, brewing time: approx. 2.5 minutes

Making drinks

– Black tea gets its dark colour and characteristic taste from the fermentation of tea leaves. Black tea can be enjoyed with a little lemon or milk. Dispensed temperature: approx. 97 °C, brewing time: approx. 3 minutes
– Chai latte has its origins in traditional Ayurveda medicine as a black tea with typically Indian spices and milk. The milk mellows the spices and tops off the flavour experience. Dispensed temperature: approx. 97 °C, brewing time: approx. 3 minutes
– Herbal tea is an aromatic infusion drink made up of dried leaves or fresh parts of plants. Dispensed temperature: approx. 97 °C, brewing time: approx. 8 minutes
– Fruit tea is made from dried pieces of fruit and/or parts of plants, e.g. rose hip. The taste of the drink varies according to which plants are used and how they are blended. Lots of fruit teas are also flavoured. Dispensed temperature: approx. 97 °C, brewing time: approx. 8 minutes
The preset dispensing temperature varies depending on the type of tea. The respective dispensing temperatures are the ones that Miele recommends for making the types of tea concerned. Whether you use loose tea leaves, blended tea or tea bags depends on your own personal preference. The amount of tea required varies from one type of tea to another. Always follow the recommendations of the manufacturer on the packaging or of the

retailer. You can adjust the amount of water according to the type of tea and the size of the cup (see “Changing the portion size”).
Making tea Touch the sensor control to access the menu containing the various types of tea. The drinks menu is displayed. Pour loose tea into a tea filter or
similar, or take a tea bag from the packet. Place the tea filter or the tea bag in the tea cup. Place the tea cup under the central spout. Touch . Select the type of tea you would like. Confirm with OK. Hot water will be dispensed into the cup. If you have selected the TeaTimer | Automatic setting, the minute minder for the brewing time will start automatically. Alternatively, you can also start the TeaTimer function manually at this point. A buzzer will sound and the symbol is no longer displayed after the brewing time has elapsed. The TeaTimer has elapsed. Now remove the tea leaves or the tea bag.
Starting the TeaTimer manually Prepare a cup of tea. TeaTimer appears in the display as soon as the water has been dispensed. Touch OK.
33

Making drinks

The editor opens with a suggested brewing time. Change the brewing time if required. Confirm with OK. A buzzer will sound and the symbol is no longer displayed after the brewing time has elapsed. The TeaTimer has elapsed. Now remove the tea leaves or the tea
bag.
Preparing a pot of tea The Teapot function allows you to make a large quantity of tea (maximum of 1 litre). The type of tea selected determines the preset temperature. The drinks menu is displayed. Tip: Make sure that the water container has enough water inside it before starting the Teapot function. Place a sufficiently large container
under the central spout. Touch the drinks sensor. Select Teapot. Select the type of tea and number of
cups you want (3 to 8).
Cancelling a drink Touch the sensor control.
Dispensing warm or hot water
You can choose between the following options: – Hot water at approx. 90 °C – Warm water at approx. 65 °C
The drinks menu is displayed. Place a suitable container underneath
the central spout. Touch the sensor.

Choose between warm or hot water. Confirm with OK. Dispensing will start.
Changing the portion size
You can change the portion size in Expert mode for the current drink or on a permanent basis. If you want to change the portion size of the drink permanently, change the Portion size parameter. Place a cup under the central spout. Touch . Select Parameters. Select a drink. Confirm with OK. The parameters that can be changed for this drink are displayed. Select Portion size. Confirm with OK. The required drink will now be made. As soon as the minimum amount has been made, Save will be shown on the display. When the cup is filled up to the level
you want, touch OK.
If you want to change the portion size for coffee drinks made with milk, the ingredients that make up the drink will be saved one after the other while the drink is being made. When the quantity for each ingredient
reaches the level you want, touch OK.
The programmed portion size will now be dispensed every time that particular drink is selected.

Tip: For the drinks pictured on the control panel, you can change the portion size by pressing and holding the button down. To do this, keep the drinks sensor pressed until the preparation process starts. As soon as the minimum amount has been made, Save will be shown on the display. If the water container becomes empty whilst making a drink, the coffee machine will stop programming the portion size. The new portion size will not be saved.

Making drinks

Expert mode

The Expert mode function allows you to change the portion size while the drink is being made. The setting will not be saved and will only apply for the current drink.

Dispensing

Switching Expert mode on and off
The drinks menu is displayed. Touch the sensor control. Select Settings | Expert mode. Select the option you want. Confirm with OK.
The setting is now saved.

Move the controller (small triangle) across the navigation area according to the portion size you want.

Expert mode: changing the portion size
The drinks menu is displayed.

The portion size can only be changed when the respective ingredient is being processed while the drink is being made. If you select DoubleShot or 2 portions , Expert mode cannot be used to change the portion size.

Select a drink. The preparation process will start. You can adjust the portion size while it is being dispensed, e.g. individually change the amount of hot milk, milk froth and espresso for a latte macchiato.

Degree of grinding

The degree of grinding determines the contact time between the ground coffee and the water, known as the extraction time. Only when the ideal degree of grinding is selected can the machine dispense a perfect cup of coffee with a fine, hazelnut brown crema.
Identifying the ideal degree of grinding
There are various ways to tell whether the degree of grinding is set correctly. The degree of grinding is too coarse if the coffee or espresso is watery and tastes acidic. The crema is very pale. The degree of grinding is too fine if the coffee or espresso tastes too bitter and the crema is dark brown.
Adjusting the degree of grinding
If the degree of grinding is adjusted by more than one level, the grinder may be damaged. Only ever adjust the degree of grinding one level at a time. Each time you adjust the setting, start making a new drink so that the beans are ground. You can then adjust the degree of grinding by one setting again.
The slide control for adjusting the degree of grinding is located on the top left behind the water container. Open the appliance door. Remove the water container.

Push the slide control exactly 1 setting forwards (for finer grinding) or one setting backwards (for coarser grinding).
The degree of grinding you select will be used for all bean types and coffee drinks. Put the water container back in place. Close the appliance door. Make one cup of coffee. Adjust the degree of grinding again, if required.
The grinder will naturally wear out slightly over time. Set the grinder to a finer degree of grinding if necessary.

Parameters

Displaying and changing parameters
You can change the portion size for all drinks. In addition, you can set the quantity of coffee, the brewing temperature and pre-brewing for each coffee drink individually. Touch the sensor control. Select a drink. Confirm with OK. The parameters that can be changed for this drink are displayed. Once you have selected a drink, the current settings for the following appear: Amount of coffee, Brew temperature and Pre-brewing.
The Portion size menu option is displayed in the first line. If you select Portion size and confirm with OK, the drink will be dispensed immediately.
Select the parameter you want. Change the setting as required. Confirm with OK. The setting is now saved.
Portion size
The flavour of the coffee produced depends not only on the type of coffee, but also on the amount of water used. You can programme the amount of water for all drinks (apart from the Coffee pot function) to suit the size of your cups and/or the type of coffee you are using.

For coffee drinks that use milk, you can not only set the amount of espresso or coffee but also the amount of milk or milk froth to be dispensed with these drinks. A maximum portion size can be programmed for each type of drink. Dispensing stops once this has been reached. The maximum possible portion size is then saved by the machine for this type of drink.
Quantity of coffee
The coffee machine can grind and brew 7.512.5 g of coffee beans per cup. The greater the quantity of ground coffee, the stronger the drink. The quantity of coffee is too low if the espresso or coffee lacks body. Increase the quantity of coffee to brew more ground coffee. The quantity of coffee is too high if the espresso or coffee tastes bitter. Decrease the quantity of coffee to brew less ground coffee.
Brewing temperature for coffee drinks
The brewing temperature must be adapted to the beans you are using and how they are roasted. It also varies depending on whether you are making espresso or coffee. Some bean types are sensitive to high brewing temperatures, resulting in an impaired taste. If your coffee tastes bitter, the brewing temperature you have selected might be too high. Espresso is usually brewed at higher temperatures.

Dispensing temperature for tea drinks, warm water and hot water
You can adjust the dispensing temperatures used for the individual tea drinks and for the warm and hot water by customizing the brewing temperature. A temperature increment of approximately 2 °C makes a difference.
Pre-brewing the ground coffee
When the pre-brewing function is turned on, the ground coffee is first moistened with a little hot water. The ground coffee swells a little. The remaining amount of water is then pressed through the moistened coffee grounds shortly after. If your coffee tastes too bland and you want to add some spice and richness, try the “Prebrewing” function. Depending on the type of coffee used, pre-brewing can intensify the taste. You can set a short or long duration for pre-brewing or turn the “Pre-brewing” function off completely. Tip: We particularly recommend using the “Pre-brewing” function to make coffee.

Parameters

Profiles

Profiles
In addition to the Miele drinks menu (Miele profile), you can create individual profiles to cater for different tastes and preferences. Within the profile, you can adjust the portion sizes and parameters individually for all drinks.
Creating a profile
Touch the sensor control. The Profiles menu opens. Select Create profile. Confirm with OK. The editor will open in the display. Enter the profile name: – To enter a character, highlight the one
you want and confirm your choice with OK. – To delete a character, touch the sensor control. – To save the name, select the tick and confirm with OK.
The profile has been created.
Editing a profile
Once you have created your own profiles, you can edit them in the Profiles menu. Touch the sensor control. The Profiles menu opens. Select Edit. Confirm with OK. You can now edit the following settings for the selected profile: – Setting when the profile should
change – Changing the profile name 40

– Deleting a profile
Setting when the profile should change Touch the sensor control. The Profiles menu opens. Select Edit. Confirm with OK. Select Change profile. Confirm with OK. You have the following options: – Manual: The selected profile will
remain active until you select another one. – After each use: The machine will revert to the Miele profile whenever a drink is dispensed. – When switched on: The Miele profile will be displayed whenever the coffee machine is switched on, regardless of which profile was selected before the machine was last switched off.
Select the option you want. Confirm with OK.
Changing the profile name
This option can only be selected if one profile has been already been set up in addition to the Miele profile.
Touch the sensor control. The Profiles menu opens. Select Edit. Confirm with OK. Select Change name. Confirm with OK. Change the name as required:

Profiles

– To delete a character, touch the sensor control.
– To enter a new character, highlight the one you want and confirm your choice with OK.
– Select the tick to save the modified name.
Confirm with OK.

Touch the sensor control. The Profiles menu opens. Select the profile you want.
The name of the selected profile is shown in the top left of the display. You can now change the drinks individually.

Deleting the profile

This option can only be selected if one profile has already been created in addition to the Miele profile.

Touch the sensor control. The Profiles menu opens.
Select Edit. Confirm with OK. Select Delete profile. Confirm with OK. Select the profile you wish to delete. Select Yes. Confirm with OK.
The profile will be deleted.

Making drinks stored in a profile
Touch the sensor. Select the profile you want. Select the drink you want.
The machine starts dispensing the drink.

Changing drinks within a profile
When you change the parameters of a drink within a profile, these settings only apply to the active profile. The settings for drinks contained within other profiles remain unaffected.

MobileStart

Preparing MobileStart
Danger of burning and scalding
on the dispensing spouts. If liquids or steam are dispensed while the machine is unsupervised, persons may burn themselves if they place body parts under the central spout or touch hot components. Ensure that no one, especially children or pets, can be harmed if the machine is operated without supervision.
Milk is not cooled in the milk container or in a milk carton. Milk may spoil if it is left in the milk container or carton for an extended period without being cooled (depending on the type of milk). In particular, do not leave cow’s milk in the milk container or carton for an extended period without cooling it. Please follow the manufacturer’s instructions regarding the shelf life of the milk used.
With Mobile Start, you can start making a drink, for example, via the Miele app. Make sure that the coffee machine is
ready to use for example, check that the water container and bean container are sufficiently filled. Place a sufficiently large, empty cup under the central spout. You will only be able to use Mobile Start if – Miele@home has been set up for your coffee machine and – the Remote control and Mobile Start functions have been switched on. You can then make drinks via the app.

Switching MobileStart on and off
To use Mobile Start, the Remote control function must be switched on. The drinks menu is displayed. Touch the sensor control. Select Mobile Start. Select the option you want. Confirm with OK.
As soon as you have switched on Mobile Start, you can start making a drink via the app.
If you are making a drink via the app, you will be notified when the drink is being dispensed via audible and visual signals. These signals cannot be changed or switched off. While Mobile Start is switched on, the display shows the symbol and, when the coffee machine is switched off, the time of day. Activation rinsing is not carried out, meaning that the cup under the central spout is not filled with rinse water. If the coffee machine is being operated manually, it cannot be operated via the app. Operation on the appliance takes precedence. After 24 hours, if you have made a drink or opened the appliance door, Mobile Start is automatically switched off.

Settings

You can use the “Settings” menu to customise the coffee machine to suit your requirements.
Displaying and changing Settings
The drinks menu is displayed. Touch the sensor control. Select Settings . Confirm with OK. Select the menu option that you want
to display or change. Confirm with OK. Change the setting as required. Confirm with OK.
Some settings which can be found in the Settings menu are described in their separate sections in the operating instructions.
Language
You can select the language (and location variant of that language) for all display text. Tip: If you select the wrong language by mistake, you can find the “Language” option again via the symbol.
Time
Display (Clock display) Select how you want the time of day to show in the display when the coffee machine is switched off: – On: The time of day is always visible
in the display. – Off: The time of day is not visible in
the display.

– Night dimming: To save energy, the time of day is only displayed between 5 am and 11 pm.
When the time of day display is switched on, the energy consumption of the coffee machine increases.
Clock format – 24-hour display (24 h) – 12-hour display (12 h)
Setting Set the hours and the minutes. If the coffee machine has been connected to a WiFi network and is signed into the Miele app, the time will be synchronised based on the location setting in the Miele app.
Date
Set the date.
Timer
The coffee machine has 3 timers: – Switch on at – Switch off at – Switch off after You can allocate the individual timer functions to different days of the week.
Switch on at The coffee machine switches on at a particular time, e.g. in the morning for breakfast. The coffee machine will not switch on at the required time if you have activated the system lock. The timer settings are deactivated.

Settings

Once the coffee machine has come on automatically three times at the set time without any drinks being dispensed, it will stop switching on automatically. This prevents the coffee machine from switching itself on unnecessarily, for example, whilst you are away on holiday. The programmed times will, however, remain in the memory and will be reactivated when the machine is next switched back on manually. If you have set the time to be displayed while the machine is switched off (Show | On or Night dimming), the symbol and the desired switching-on time will appear in the display 23:59 hours beforehand.
Switch off at The coffee machine switches off at a particular time. In the event of a longer absence, the programmed times will remain in the memory and will be reactivated when the machine is next switched back on manually.
Switch off after The coffee machine switches off after a particular length of time if no sensors have been pressed. You can change this to another time of between 20 minutes and 9 hours.
By default, the coffee machine switches off after 20 minutes. Extending this time increases the energy consumption of the coffee machine.

TeaTimer
You can use the TeaTimer function to start a minute minder when making tea. There is a preset brewing time for the type of tea selected. You can adjust the preset brewing time (up to a maximum of 14:59 minutes). You can set the TeaTimer as follows: – Automatic: the TeaTimer starts
automatically once the water has been dispensed. – Manual: you have the option of starting the TeaTimer once the water has been dispensed.
While the brewing time is counting down, you can continue to use the coffee machine as normal. After the brewing time has elapsed, a buzzer will sound and the symbol will flash.
Volume
You can set the volume of the buzzer and keypad tones (segment bar). The welcome melody that plays when you touch the On/Off button can be switched on or off.
Display brightness
You can set the display brightness (segment bar).
Lighting
You can change the brightness of the lighting while the coffee machine is switched on or off. You can also specify how long the lighting should stay on for when the machine is switched off (adjustable between 15 minutes and 9 hours).

Settings

The brighter the lighting is set and the longer it is switched on, the higher the energy consumption of the coffee machine.
Info (display information)
You can display the number of drinks dispensed so far and how many more can be dispensed until the maintenance programmes have to be run.
Altitude
If the coffee machine is installed at high altitudes, the lower air pressure will cause the water to boil at a correspondingly lower temperature. You can set the local altitude to ensure the ideal drink preparation temperatures.
Performance mode
You can select the appropriate Performance mode to suit your usage habits: – Eco mode – Barista mode – Latte mode There is also a mode for occasional, intensive use of the coffee machine: Party mode.
Eco mode In Eco mode, the coffee machine consumes the least amount of energy. The system does not heat up until someone starts making a drink.
Eco mode is set by default. Selecting a Performance mode other than Eco mode increases the energy consumption of the coffee machine.

Barista mode This Performance mode has been optimised for unadulterated coffee enjoyment. Users can enjoy coffeebased drinks without any delay as the coffee machine remains heated to the brewing temperature. Barista mode consumes more energy than Eco mode.
Latte mode This Performance mode has been optimised for preparing milk. In Latte mode, milk-based drinks can be prepared within a much shorter space of time. Latte mode consumes more energy than Eco mode and Barista Mode.
Party mode This Performance mode has been configured for the occasional intensive use of the coffee machine, e.g. for family get-togethers.
Clean the coffee machine thoroughly after intensive use, particularly the milk pipework. It may be necessary to descale the coffee machine and degrease the brew unit.
Please note the following information about Party mode: – The general pipework is rinsed much
less frequently or not at all. The milk pipework is not rinsed until around 1 hour after milk was last dispensed. – Cleaning status messages or cleaning prompts are suppressed and delayed until the machine is next switched on.

Settings

– The cup light remains permanently switched on at the maximum brightness level for as long as the coffee machine stays switched on.
– The Switch off at and Switch off after timers are deactivated.
– The coffee machine switches off 6 hours after the last sensor was pressed. The next time the appliance is switched back on, Party mode is switched off and the most recently set Performance mode is switched back on.
Party mode consumes more energy than other Performance modes.

Water hardness
Programme the coffee machine to the water hardness level of your area so that it functions correctly and does not get damaged. Contact your local water supplier to find out your local water hardness range if necessary. If you are using bottled drinking water, e.g. mineral water, select settings according to the calcium content. The calcium content is specified on the label of the bottle in mg/l Ca2+ or ppm (mg Ca2+/l).

Do not use carbonated water.

The hardness level is set to 21 °dH by default.

Water hardness °dH mmol/l

0.2

0.4

0.5

Calcium content mg/l Ca2+ or ppm (mg Ca2+/l)
7 14 21

Setting s
1 2 3

Water hardness °dH mmol/l

0.7

0.9

1.1

1.3

1.4

1.6

1.8

2.0

2.1

2.3

2.5

2.7

2.9

3.0

3.2

3.4

3.6

3.8

3.9

4.1

4.3

4.5

4.6

4.8

5.0

5.2

5.4

5.5

5.7

5.9

6.1

Calcium content mg/l Ca2+ or ppm (mg Ca2+/l)
29 36 43 50 57 64 71 79 86 93 100 107 114 121 129 136 143 150 157 164 171 179 186 193 200 207 214 221 229 236 243

Setting s
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

Settings

Water hardness °dH mmol/l

Calcium content mg/l Ca2+ or ppm (mg Ca2+/l)

6.3

250

6.4

257

3745 6.68.0

258321

4660 8.210.7

322429

6170

10.9 12.5

430500

Setting s
35 36 3745 4660 6170

Tip: If your water hardness is >21 °dH (3.8 mmol/l), we recommend using bottled drinking water instead (< 150 mg/l Ca2+). This will mean your coffee machine will need to be descaled less often and there will be less impact on the environment because less descaler will be used.

System lock
You can lock the coffee machine to prevent it being used without your knowledge, by children, for example.

When the system lock is activated, the settings for the Switch on at timer are deactivated. The coffee machine will not switch on at the time set.

Temporarily deactivating the system lock Press and hold OK for 6 seconds. The system lock is reactivated when the coffee machine is next switched off.
Miele@home
The coffee machine is equipped with a WiFi module and enabled for Miele@home.

Depending on whether you have connected the coffee machine to your network or not, the following options are displayed under Miele@home: – Set up: This option only appears if the
coffee machine has never been connected to a WiFi network or if the network configuration has been reset. – Deactivate*/Activate*: The settings for the WiFi network are retained, but the network is switched on or off. – Connection status*: Information about the WiFi connection is displayed. The symbols indicate the strength of the connection. – Set up again*: The settings for the current WiFi network will be reset. The WiFi connection will be set up from scratch. – Reset*: Networking is switched off and the settings for the current WiFi network will be reset.
* This menu option appears if Miele@home has been set up and the coffee machine has where applicable been connected to a WiFi network. Tip: When the coffee machine is ready for operation, you can start networking at any time by touching and holding the OK sensor control or by scanning the QR code in these operating instructions (see “Performing Scan & Connect”).
Networking increases the energy consumption of the coffee machine, even if it is switched off.

Settings

The network configuration should be reset whenever the coffee machine is being disposed of or sold, or if a used coffee machine is being put into operation. This is the only way to ensure that all personal data has been removed and the previous owner will no longer be able to access the coffee machine.
Performing Scan & Connect
Initial commissioning has been carried out without Miele@home having been set up.
Scan the QR code. If you have installed the Miele app and have a user account, you will be taken directly to the networking steps. If you have not yet installed the Miele app, you will be taken to the Apple App Store® or the Google Play StoreTM. Install the Miele app and set up a user
account. Scan the QR code again. The Miele app will guide you through the setup process.

You can change the coffee machine settings, for example, in the Miele app when remote control is switched on. To start making a drink via the app, MobileStart must be activated as well. The remote control function is switched on by default.
RemoteUpdate
The RemoteUpdate function allows the software on your coffee machine to be updated. If an update is available for your coffee machine, it will automatically download it. Updates will not be installed automatically. They must be initiated manually. If you do not install an update, you can continue to use your coffee machine in the usual way. However, Miele recommends installing updates.
The RemoteUpdate menu option is only displayed and can only be selected if the requirements for using Miele@home have been met.
The RemoteUpdate function is activated by default. Available updates will be downloaded automatically but will only be installed if you initiate installation manually. Deactivate RemoteUpdate if you do not want any updates to be downloaded automatically.

Remote control
The Remote control menu option appears if Miele@home has been set up and the coffee machine has been connected to a WiFi network.

Running a RemoteUpdate Information about the content and scope of an update is provided in the Miele app. A message will appear in your coffee machine display if an update is ready for installation.

Settings

You can install the update immediately or postpone this until later. You will be reminded about the update the next time you switch the coffee machine on. Deactivate RemoteUpdate if you do not want to install the update.
The update may take several minutes.
Please note the following information about the RemoteUpdate function: – You will only receive a message when
a RemoteUpdate is available. – Once a RemoteUpdate has been
installed, it cannot be undone. – Do not switch the coffee machine off
during the update. Otherwise, the update will be aborted and will not be installed. – Some software updates can only be carried out by the Miele Customer Service Department.
Software version
The “Software version” menu option is intended for the Miele Customer Service Department. You do not need this information for domestic use.
Showroom programme (Demo mode)
Do not activate this function for domestic use.
The Showroom programme | Demo mode function enables the coffee machine to be demonstrated in shops or showrooms. In this mode, the appliance lights up but no drinks can be prepared and no maintenance programmes can be run.

You can activate demo mode without commissioning the appliance for the first time. Switch the coffee machine on and off again. Press the control for 5 seconds straight away. Demo mode is activated.

Settings
Factory defaults
You can reset the coffee machine to its factory default settings. The following will not be reset:
– The number of drinks dispensed and the machine status (No. of portions until machine needs descaling, … brew unit needs degreasing)
– Language – Time and date – Profiles and the associated drinks – Miele@home
50

Cleaning and care

Risk to health due to inadequate cleaning
Heat and moisture inside the coffee machine can cause coffee residues to become mouldy and/or milk residues to go off and pose a risk to health. Carefully clean the coffee machine regularly.

Overview of cleaning intervals

Recommended frequency Daily (at the end of the day)
Once a week (more often if heavily soiled)
Once a month Once a year (more often if required) As and when required / after prompt appears in display

What do I have to clean/maintain? Milk container and lid Milk valve Water container Drip tray cover Drip tray and grounds container Central spout Cup rim sensor Interior area Brew unit Drip tray Appliance front Milk valve Bean container Grease the brew unit (with silicone grease) Clean the milk pipework (with 2 cleaning sticks) Degrease the brew unit (with 1 cleaning tablet) Descale the appliance (with 2 descaling tablets)

Cleaning and care

Cleaning by hand or in the dishwasher
The brew unit is not dishwasher safe. Clean the brew unit by hand only under warm running water. Do not use washing-up liquid or any other cleaning agent.
The following components must be cleaned by hand only: – Central spout stainless steel cover – Brew unit – Bean containers and lids
Risk of damage as a result of
excessively high dishwasher temperatures. Components may be ruined (e.g. may become warped) if washed in a dishwasher at temperatures higher than 55 °C. For dishwasher-safe components, always select dishwasher programmes with a maximum temperature of 55 °C.
Contact with natural dyes such as those found in carrots, tomatoes and ketchup may discolour the plastic parts in the dishwasher. This discolouration does not affect the stability of the parts.
The following components are dishwasher safe: – Drip tray, lid and waste container – Drip tray cover – Central spout (without stainless steel
cover) – Milk flask and lid – Cup sensor 52

– Maintenance container
– Water container
Danger of burning and scalding
on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. Always allow the coffee machine to cool down before cleaning it. Please be aware that water in the drip tray can also be very hot.
Risk of damage due to moisture
ingress. The steam from a steam cleaning appliance could reach live electrical components and cause a short circuit. Do not use a steam cleaner to clean the coffee machine.
It is important to clean the machine regularly, as the used coffee grounds will soon go mouldy. Milk residues can go off and can block the milk pipework.

Cleaning and care

Unsuitable cleaning agents
Contact with unsuitable cleaning agents can alter or discolour all surfaces. All surfaces are susceptible to scratching. Scratches on glass can in some circumstances lead to breakage. Remove all cleaning agent residues immediately. Make sure you remove any spillages or splashes of descaler immediately.
To avoid damaging the surfaces, do not use: – Cleaning agents containing soda,
ammonia, acids or chlorides – Solvent-based cleaning agents – Disinfectant cleaning agents and hand
sanitiser gel – Cleaning agents containing descaling
agents (unsuitable for cleaning the front of the machine) – Stainless steel cleaners – Dishwasher cleaners (unsuitable for cleaning the front of the machine) – Glass cleaning agents – Cleaning agents for ceramic glass hobs – Oven cleaners – Steam oven cleaning agents (DGClean) – Abrasive cleaning agents, e.g. powder cleaners and cream cleaners

– Hard, abrasive brushes or sponges, e.g. pot scourers, brushes or sponges which have been previously used with abrasive cleaning agents
– Eraser stain remover blocks – Sharp metal scrapers – Steel wool or stainless steel wire
scourers – Sunscreen
Opening the appliance door
Risk of damage when opening the door if the central spout is too high or too low. If the central spout is too high or too low, the door cannot be opened. Trying to open the door may damage the central spout. Make sure that the central spout is in the top or middle position before you open the door.
Open the appliance door.

Cleaning and care

Cleaning the drip tray and grounds container
Danger of burning and scalding
on hot components or by hot liquids. Components can become very hot during operation. Touching hot components can cause burning. The liquids and steam dispensed are very hot and can cause scalding. If the pipework has just been rinsed, wait a while before removing the drip tray from the coffee machine. Please be aware that water in the drip tray can also be very hot. Do not touch hot components.

Empty the grounds container after removing it from the drip tray.
The grounds container may contain a small amount of water from rinsing as well as the leftover coffee grounds. Taking the drip tray apart

Clean the drip tray and grounds container every day to avoid unpleasant smells and mould. A prompt will appear in the coffee machine’s display when the drip tray and/or the grounds container is full and needs to be emptied. Empty the drip tray and the grounds container. The lid does not need to be taken off the drip tray in order to empty it. Open the appliance door.
Remove the drip tray and grounds container from the appliance.
54

The orange clips are not removable.
Take the lid off the drip tray as follows: press the orange clips outwards on both sides to release the lid.
Remove the lid. Clean the drip tray, lid and waste
container by hand using warm water and a little washing-up liquid. Dry all parts. Tip: To give the drip tray, lid and waste container an extra thorough clean, clean them in the dishwasher from time to time. If the drip tray is heavily soiled, clean it with a brush before placing it in the dishwasher. Clean the inside of the coffee machine underneath where the drip tray goes.

Cleaning the contacts on the drip tray

Cleaning and care

Clean the contacts (metal discs) and the space between them carefully, e.g. using a brush.
Dry all parts thoroughly. The contacts will not be able to detect that the drip tray is full if they are damp or dirty. Check the contacts and the area around them once a week.
Reassembling the drip tray

Place the waste container on the lid. Push the drip tray and waste
container back into the coffee machine. Close the appliance door.
Cleaning the drip tray cover
Clean the drip tray cover on a daily basis.

Attach the drip tray lid as follows: slide the lid under the lug next to the contacts and apply pressure to the lid until the catches at the sides audibly click into place.

Remove the drip tray cover as follows: apply pressure to the rear edge so that the cover tips forwards and you can remove it easily.
Clean the drip tray cover by hand using warm water and a little washing-up liquid.
Dry the drip tray cover. Refit the drip tray cover.
55

Cleaning and care

Tip: To give the drip tray cover an extra thorough clean, clean it in the dishwasher from time to time.
Cleaning the water container
Clean the water container every day. Open the appliance door. Remove the water container. Clean the water container by hand
using warm water and a little washing-up liquid. Rinse the water container with clean water to remove any remaining washing-up liquid. Dry the outside of the water container. Tip: To give the water container an extra thorough clean, clean it in the dishwasher from time to time.

Cleaning the central spout
Only ever clean the central spout’s stainless steel cover by hand using warm water and a little washing-up liquid.
Clean all parts of the central spout at least once a week.
Removing the central spout Open the appliance door. Pull the central spout’s stainless steel
cover forwards to remove it. Clean the central spout’s stainless
steel cover.

Detach the milk pipework from the dispensing unit as follows: pull the opening tag to the left.
Clean and dry the surface that the water container sits on.
Fill the water container with fresh, cold drinking water.
Push the water container all the way into the coffee machine until you feel resistance.
Close the appliance door.
56

Do not remove the milk pipework connecting piece. If necessary, clean the connecting piece with the cleaning brush.

Cleaning and care
Take the dispensing unit apart, separating it into 3 components: the Y-piece, the spouts and the holder.
Cleaning the central spout Only ever clean the central spout’s stainless steel cover by hand using warm water and a little washing-up liquid.
Clean all parts thoroughly by hand. Tip: With the exception of the stainless steel cover, all parts of the central spout should be cleaned in the dishwasher from time to time to give them a thorough clean. This will remove coffee deposits and milk residues effectively.

Grip the dispensing unit by the sides and pull it down to remove it.

Clean the area around the central spout with a damp sponge cloth.
Inserting the central spout The dispensing unit is easier to reassemble if the individual parts are dampened with water first.
Make sure that all parts are tightly connected to one another.
Fit the dispensing unit back together. Press down firmly so that the spouts
become securely connected to the holder.
57

Cleaning and care

Slide the dispensing unit into the coffee machine.
Connect the milk pipework. Refit the stainless steel cover. Close the appliance door. Fit cover to central spout will appear in the display. Confirm with OK.
Cleaning the cup rim sensor
Clean the cup rim sensor at least once a week and more often if heavily soiled. The cup rim sensor is located under the central spout.

The cup rim sensor is released. Clean the cup rim sensor by hand
with warm water and a little washingup liquid. Tip: To give the cup rim sensor an extra thorough clean, clean it in the dishwasher from time to time. To refit the cup rim sensor, press it into the holder on the central spout from below.
Cleaning the milk container with lid
The milk container should be taken apart and cleaned every day after use. Both the lid and the glass flask can be cleaned in the dishwasher, or by hand using warm water and a little washingup liquid. Remove and empty the milk
container.

Press the two latches together (see arrows).
58

Rinse the milk pipework in the lid under running water and then place the milk container lid in the dishwasher.
If no water runs out of the connecting piece , clean it with the cleaning brush.
Clean the glass flask.

Use a clean cloth to dry all parts, paying particular attention to the threads on the lid and on the glass.
Reassemble the milk container.

Cleaning and care

Use a damp sponge cloth to clean the milk container holder on the coffee machine.
Cleaning the milk valve (daily)
The milk valve seal can be damaged by objects with sharp edges or similar. Do not use any sharp-edged objects, e.g. knives, to clean the milk valve.
Clean the milk valve every day. If allowed to dry, milk residues can become encrusted on the stainless steel bolt. These crusty deposits are difficult remove. Therefore, it is important to carry out regular cleaning after preparing milk.

The milk valve is located under the bean container on the left-hand side. Open the appliance door. Clean the milk valve with a damp
sponge cloth/microfibre cloth. Close the appliance door.
Removing and cleaning the milk valve (once a month)
Only remove the milk valve when the coffee machine is switched off. Do not switch on the coffee machine while the milk valve is removed.
Remove and clean the milk valve at least once a month. If only hot milk is dispensed instead of milk froth or the milk sprays out during dispensing, the milk valve may be blocked. Clean the milk valve more often if necessary.
Removing the milk valve
Only remove the milk valve when the coffee machine is switched off. Do not switch on the coffee machine while the milk valve is removed.
Switch the coffee machine off. Open the appliance door. Remove the bean container on the
left and the maintenance container. 59

Cleaning and care

Remove the central spout’s stainless steel cover.

Rinse the hoses thoroughly under running water.
Do not remove the connecting pieces from the hoses.

Remove the milk valve cover. Press on the recessed grip to unlock the cover. On the top right-hand side of the cover, you will find a pin for swivelling the cover out.

Press the latches on the left and righthand sides of the milk valve holder and pull the holder forwards to remove it.

Detach the milk pipework from the dispensing unit on the central spout and from the milk valve silicone seal and .
Remove the milk pipework connecting the milk valve to the central spout.
Disconnect the angular moulded hose from the round hose.

Take the holder and silicone seal apart.

Cleaning and care
Insert the silicone seal into the milk valve holder.

Pull the stainless steel bolt upwards and out.
Cleaning the milk valve The milk valve cover is not dishwasher-safe. The milk valve cover may be damaged if cleaned in the dishwasher. The milk valve cover should only ever be cleaned by hand.
Do not switch on the coffee machine while the milk valve is removed. Clean all parts of the milk valve by
hand. Tip: With the exception of the cover, all parts of the milk valve should be cleaned in the dishwasher from time to time to give them a thorough clean. If there is any dry milk residue on the front, soak the stainless steel bolt in warm water and a little washing-up liquid.
Inserting the milk valve Do not switch on the coffee machine while the milk valve is removed. Insert the stainless steel bolt from
above.

Insert the holder and silicone seal until they audibly click into place.
Connect together the angular moulded hose and longer milk pipework. Start by attaching the moulded hose to the top of the central spout. The black connecting piece should be pointing to the rear.
Then, connect the bottom end of the moulded hose to the dispensing unit.
Insert the milk pipework into the milk valve on the left and right-hand sides. Push the connecting pieces into the silicone seal as far as they will go. 61

Cleaning and care

Check that the milk pipework is snug against the housing and that the cover can be easily attached.
Tip: If necessary, turn the milk pipework towards the back at the connecting piece on the right-hand side.
Attach the milk valve cover as follows: insert the pin in the top right-hand corner and swivel the cover backwards until a proper fit is achieved.
Push the left-hand bean container and maintenance container back into the coffee machine.
Attach the central spout’s stainless steel cover.
Close the appliance door.

You can now switch the coffee machine back on.
Cleaning the bean containers
Risk of damage from incorrect
use and cleaning. Immersing the bean containers in liquids can result in malfunctions. If they are taken apart, bits may break off or the mechanism may no longer work properly once they are reassembled. Do not disassemble the bean containers. Do not immerse the bean containers in liquids, e.g. soapy water.
Coffee beans contain oils that can deposit themselves on the walls of the bean containers and hinder the flow of the beans. Therefore, clean the bean containers at least once a month with a soft cloth. If required, you can clean the lids of the bean containers by hand with warm water and a little washing-up liquid. Dry the lids thoroughly before refitting them on the bean containers. Open the appliance door. Pull the left and right-hand bean
containers out of the coffee machine. Clean the bean container wells inside
the machine. Tip: Use a vacuum cleaner to remove any coffee residues from the interior. Remove the lids and empty the bean
containers.

Cleaning and care

Removing the brew unit
It might not be possible to re-insert the brew unit if you have removed it and changed the position of the handle. Once you have removed the brew unit, do not change the position of the handle.
Open the appliance door. Remove the water container.

Do not remove the components for improving the flow of the beans (see arrow).
Clean the bean containers and lids by hand using a slightly moist cloth.
Dry all parts carefully before filling the bean containers with roasted coffee beans again.
Refit the lids. Push the bean containers back into
the coffee machine. Close the appliance door.
Cleaning the brew unit and interior by hand
The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Clean the brew unit by hand only with warm water. Do not use any cleaning agents.
Remove and rinse out the brew unit once a week. Also clean the area below the brew unit once a week.

Press the button under the handle of the brew unit and, whilst doing so, turn the handle forwards .
First, pull the brew unit sideways and then slide it out forwards . While doing this, tilt the brew unit forwards . 63

Cleaning and care

If you cannot remove the brew unit or can only do so with difficulty, the brew unit drive is not in the correct position.

Cleaning the brew unit

The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Only ever clean the brew unit by hand with warm water. Do not use any cleaning agents.

Clean the brew unit by hand under warm running water without using any cleaning agents.

Clean the brew unit niche with a damp, clean sponge cloth. When cleaning, pay particular attention to the areas marked in white in the illustration, e.g. around the drive shaft.

Wipe any coffee residue from the filters. One filter is located in the funnel. The other filter can be found to the left of the funnel.
Dry the funnel to prevent ground coffee sticking to it the next time a coffee is made.

Inserting the brew unit To insert, follow the instructions for
removal in reverse order: push the brew unit back into the coffee machine. Tilt the brew unit forward a little when doing this. If you cannot re-insert the brew unit, the brew unit drive is not in the correct position.

Cleaning the inside of the appliance Use your vacuum cleaner or similar to
remove dry coffee grounds.

Press the button under the handle of the brew unit and, whilst doing so, turn the handle backwards .
64

Cleaning and care

Tip: If you are unable to turn the brew unit handle, apply firm pressure to the sides of the brew unit. Push the water container into the
coffee machine. The process of removing and inserting the brew unit causes ground coffee to drop onto the drip tray. Remove the drip tray and clean the
lid. Push the drip tray back into the coffee
machine. Close the appliance door.
Cleaning the interior, inside of the appliance door and drip tray
Clean the interior and appliance front as part of the normal cleaning process. For instance, if you remove the water container, use this as an opportunity to clean the area under the water container at the same time.

– Water container – Drip tray – Maintenance container – Brew unit – Bean container
Tip: Use a vacuum cleaner to remove dry coffee residues. Clean the interior and the inside of
the appliance door by hand with a clean and moist sponge cloth/ microfibre cloth. Wipe the interior and appliance door dry using a soft cloth. Reinsert all parts. Close the appliance door.
Cleaning the appliance front
If soiling is not removed promptly, it could cause the surface to alter or discolour. Remove any soiling on the appliance front straight away. Make sure that water cannot get behind the display. Clean the appliance front after descaling. If possible, wipe up any spillages of descaling agent immediately.

The drip tray is located at the bottom on the inside of the appliance door. Clean the drip tray regularly.
Open the appliance door. Clean the drip tray. Remove the following parts from the
interior:

Tip: Before cleaning the control panel, open the appliance door. This will prevent accidental operation. Clean the appliance front with a clean
and moist sponge cloth/microfibre cloth. Dry all surfaces with a soft cloth. Tip: You can also use a Miele microfibre cloth to clean the appliance front.
65

Cleaning and care

Maintenance programmes
The coffee machine has maintenance programmes for: – Rinsing the machine – Rinsing the milk pipework – Cleaning the milk pipework – Degreasing the brew unit – Descaling the machine Run the relevant maintenance programme when the prompt to do so appears in the display. You can also start maintenance programmes at any time so that the coffee machine does not prompt mandatory cleaning at an inconvenient time. Tip: To save you having to empty the drip tray too often, you can place the maintenance container under the central spout.
Opening the Maintenance menu
Touch the sensor control. You can now select a maintenance programme.
Rinse the appliance
If you have made a coffee drink, the coffee machine will rinse the coffee pipework automatically before switching off. You can also start the Rinse the appliance function manually.

Cleaning the milk pipework
The milk pipework must be cleaned at least once a week. The Clean the milk pipework maintenance programme lasts for approx. 15 minutes. Touch the sensor control. Select Clean the milk pipework. Confirm with OK. The process will start and various messages will appear in the display. Follow the instructions in the display.
When Fill water container with lukewarm
water and cleaning agent up to the cleaning
mark and replace it. Close the
door appears in the display, proceed as follows: For optimum cleaning results, we recommend the Miele cleaning agent for milk pipework. The powder cleaning agent for milk pipework has been specially developed for use with Miele coffee machines and prevents subsequent damage. You can order the cleaning agent for milk pipework via the Miele online shop, the Miele Customer Service Department or from your Miele dealer. Add 2 sticks of the cleaning agent for
milk pipework to the water container.

Rinse the milk pipework
If you have made a drink with milk, the coffee machine will rinse the milk pipework automatically after a few minutes. You can also start the Rinse the milk pipework function manually.

Cleaning and care

Fill the water container with lukewarm water up to the mark and stir the solution.
Follow the instructions for the cleaning agent mixing ratio carefully. Fill the water container with the specified amount of water. Otherwise, cleaning will be incomplete.
Push the water container back into the machine.
Close the appliance door. Follow the instructions in the display. If prompted to do so in the display,
rinse the water container thoroughly with clean water. Make sure that no cleaning agent is left in the water container. Fill the water container with drinking water. The cleaning process is complete when the drinks menu appears.

Degreasing the brew unit
Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. The brew unit must be degreased regularly in order to ensure aromatic coffee and trouble-free operation of the coffee machine. We recommend using Miele cleaning tablets to clean the brew unit. These have been specially developed for degreasing the brew unit in Miele coffee machines and prevent subsequent damage. The cleaning tablets are available to order from the Miele online shop, from the Miele Customer Service Department or from your Miele dealer. After 200 portions have been dispensed, a message prompting you to degrease the brew unit will appear in the display. Confirm the message with OK. This message will keep being displayed until the brew unit has been degreased.
Starting Degrease brew unit Touch the sensor control. Select Degrease the brew unit and
touch OK. The maintenance programme will then start. Follow the instructions in the display.
Remove the water container and the brew unit. Clean the interior of the machine. Rinse the brew unit by hand and refit it with a
cleaning tablet in it. will appear in the display.

Cleaning and care

Removing the brew unit It might not be possible to re-insert the brew unit if you have removed it and changed the position of the handle. Once you have removed the brew unit, do not change the position of the handle.
Open the appliance door. Remove the water container.
Press the button under the handle of the brew unit and, whilst doing so, turn the handle forwards .

First, pull the brew unit sideways and then slide it out forwards . While doing this, tilt the brew unit forwards .
If you cannot remove the brew unit or can only do so with difficulty, the brew unit drive is not in the correct position.
Cleaning the brew unit and interior
The moving parts of the brew unit are lubricated. Cleaning agents will damage the brew unit. Clean the brew unit by hand only with warm water. Do not use any cleaning agents. To ensure good tasting coffee and to prevent the formation of microbes in the appliance, remove and clean the brew unit under running water once a week.
Clean the brew unit by hand under warm running water without using cleaning agent.

Wipe any coffee residues from the filters. One filter is located in the funnel and the other to the left of the funnel.
The process of removing the brew unit causes ground coffee to drop onto the drip tray.
68

Cleaning and care

Remove the drip tray and clean the lid.
Clean the interior of the coffee machine (see also “Cleaning and care Removing the brew unit and cleaning it by hand”). Use a vacuum cleaner to remove dry coffee residues.
Dropping a cleaning tablet into the brew unit

Press the button under the handle of the brew unit and, whilst doing so, turn the handle backwards .
Push the water container and drip tray (plus grounds container) back into the coffee machine.
Close the appliance door. Follow the further instructions given
on the display.
The cleaning process is complete when the drinks menu appears.

Descaling the machine

Risk of damage from spilt descaling solution. Sensitive surfaces and/or natural floors can suffer damage. Wipe up any spillages of descaling agent immediately.

Drop a cleaning tablet into the top of the brew unit (arrow).
Push the brew unit containing the cleaning tablet back into the coffee machine.
If you cannot re-insert the brew unit, the brew unit drive is not in the correct position.

Limescale builds up in the coffee machine through use. How often the appliance needs to be descaled will depend on the water hardness level in your area. Limescale must be removed regularly. The appliance will guide you through the descaling process. Various messages will appear in the display, e.g. you will be prompted to empty the drip tray or fill the water container. Descaling must be carried out. The process takes approx. 35 minutes.
The coffee machine will give you plenty of warning when it needs to be descaled. As of this point, the display will indicate how many more drinks can be made before descaling becomes absolutely essential. This number is indicated whenever a drink is made.
Confirm the message with OK.

Cleaning and care

When the number of remaining portions reaches 0, the coffee machine will lock out. You can switch the coffee machine off if you do not want to run the descaling programme at this point in time. You can not make any drinks until the machine has been descaled.

Descaling after prompt appears in the display Descale the appliance will appear in the display. Confirm the message with OK. The process will start. Follow the instructions in the display. When Place 2 descaling tablets in the water
container and fill it with lukewarm water up to the descaling symbol and insert it. Close
the door. appears in the display, proceed as follows. For optimum descaling results, we recommend using the Miele descaling tablets. The descaling tablets have been specially developed for Miele coffee machines.
Other descalers, which contain other acids besides citric acid and/or other undesirable substances, such as chlorides for example, can cause damage to the product. Moreover, the descaling result required cannot be guaranteed if the descaling solution was not of the appropriate concentration.
Miele descaling tablets are available to order via the Miele online shop, from the Miele Customer Service Department or from your Miele dealer. You will need 2 descaling tablets.

Fill the water container to the mark with lukewarm water.
Add 2 descaling tablets to the water container.
Follow the instructions for the mixing ratio carefully. Fill the water container with the specified amount of water. Otherwise, descaling will be incomplete.
Carrying out descaling Push the water container back into
the machine. Follow the further instructions given
in the display. When Rinse out and insert the water container. Close the door appears in the display: Remove the water container and rinse
it thoroughly with clean water. Ensure that no descaling solution residue remains in the water container. Fill the water container with tap water. The descaling process is complete when the drinks menu appears.

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily remedied. You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/ service. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it.

Messages in the display

Error messages must be confirmed with OK, otherwise the message can reappear in the display even though the problem has been remedied.

Follow the instructions which appear in the display to remedy the problem. If after this, the fault message appears in the display again, contact Miele Service.

Problem F1, F2, F80, F82 F353, F354
F74, F77 F225, F226 F235, F353, F354

Cause and remedy
There is an internal fault. Switch the coffee machine off. Wait for
approximately 1 hour before switching the machine back on again.
There is an internal fault. Switch the coffee machine off. Wait for
approximately 2 minutes before switching the machine back on again.

Problem solving guide

Problem F73 or
Check the brew unit

Cause and remedy
The brew unit cannot be positioned correctly or is soiled. It is not possible to press the ground coffee. Check whether you can remove the brew unit. If you can remove the brew unit, rinse it under
running water.

Push the coffee ejector of the brew unit into the correct position (see illustration).
Place the water container in the coffee machine and close the machine door. Do not insert the brew unit. Switch the coffee machine on.
This will initialise the brew unit motor and put it back into the start position. When Insert the brew unit appears in the display, put
the brew unit back in the coffee machine. Close the machine door. If you cannot remove the brew unit, switch the coffee machine off. Wait for approximately 2 minutes before switching the machine back on again.

A maintenance

The water container has not been filled and inserted

programme is

correctly.

prematurely aborted and Check that you have selected the correct mark.

the following appears in the display: Push the

The symbols marked on the water container indicate the amount of water required for the

water container in until it
engages.

Descale the appliance: and Clean the milk pipework: maintenance programmes.

Fill the water container up to the relevant mark and

restart the process.

Problem solving guide

Problem F233
F 307 or Remove the milk
valve and clean it

Cause and remedy
The cup rim sensor is not inserted or is incorrectly inserted. If the central spout is moving upwards and the cup rim sensor is bumped, e.g. with a cup, the cup rim sensor loses its reference position. Confirm the message with OK. Refit the cup rim sensor. Cup rim detection remains inactive and the central spout stays in the top position until the coffee machine is next switched on. Cup rim detection is reinitialised during the next switch-on operation.
The milk valve is faulty. Remove and clean the milk valve (see “Cleaning and
care Removing and cleaning the milk valve”).

Unusual performance of the coffee machine

Problem

Cause and remedy

The display remains dark The On/Off button was not held for long enough.

when the coffee machine is turned on using the On/ Off button .

Touch and hold the On/Off button for at least 3 seconds.
The plug is not inserted in the socket correctly. Insert the plug into the socket.

The fuse has tripped because the coffee machine, voltage or another appliance is defective.
Switch off at the wall socket and remove the plug. Contact a qualified electrician or the Miele
Customer Service Department.

The lighting remains off after the coffee machine has been switched on.

The lighting has been switched off. Switch the lighting on (see “Settings – Lighting”).
The lighting is faulty. Call Service.

The coffee machine

There is a fault.

does not respond to

Touch and hold the On/Off button until the

operation via the display. display switches off and the machine restarts.

Problem solving guide

Problem The coffee machine turns off suddenly.
The sensors do not respond to touch. The coffee machine can no longer be operated. A fan can be heard even though no drinks are being prepared or the coffee machine is switched off. Coffee dispensing is repeatedly interrupted and the message Fill the bean container appears in the display.

Cause and remedy The factory set switch-off time (20 minutes) or the switch-off time you have programmed has been reached. If required, you can select a new switch-off time
(see “Settings Timer”).
The plug is not inserted in the socket correctly. Insert the plug into the socket. There is an internal fault. Disconnect the coffee machine from the power
supply.
This is not a fault. Once a drink has been dispensed or the machine has been switched off, the internal fan will continue to run until the interior is sufficiently dehumidified.
This is not a fault. The brew unit has not detected the ground coffee. Certain types of coffee produce a small amount of coffee when they are ground. In such cases, the grinder is usually set to fine and the minimum quantity of coffee is set. Confirm the message with OK. If the display appears with all types of coffee: Set the grinder to a coarser setting (see “Grinder
setting”). Select a larger quantity of coffee. Don’t forget to check any drinks changed in “Profiles”.
If the message only appears when dispensing certain drinks: Check the quantity of coffee set for this drink (see
“Quantity of coffee”). Select a larger quantity of coffee. You may also need to set a coarser grinder setting.

Problem solving guide

Problem

Cause and remedy

The brew unit cannot be The brew unit drive is not in the correct position.

removed from the coffee If necessary, move the handle on the brew unit back

machine.

to the start position.

Close the appliance door.

Switch the coffee machine off.

Wait approx. 1 minute before switching the coffee

machine back on.

This will initialise the brew unit drive and put it back into the start position. If necessary, repeat these steps.

The brew unit cannot be re-inserted into the coffee machine.

The brew unit drive is not in the correct position. Close the appliance door.
This will initialise the brew unit drive and put it back into the start position. If necessary, repeat this step.

Drink dispensing is prematurely aborted even though there is a container under the central spout.

This is not a fault. If the container has a very wide opening that prevents the cup rim sensor from making contact with the edge of the container (e.g. in the case of a very large cup), the drink will be cancelled. Use a different container or position the existing one so that the sensor can detect the rim.

The coffee machine does not switch itself on even though the Switch on at timer setting has been activated.

The system lock has been activated. Deactivate the system lock.
The current day of the week has not been selected. Check the timer settings and change these if
necessary.

The coffee machine was not used after being switched on automatically three times in succession (holiday mode). Switch the machine on and dispense a drink.

Steam is dispensed instead of water while preparing hot water or making tea. The display is hard to see or not able to be read.

It is likely that the wrong altitude has been set. Change the altitude settings (Settings Altitude). If necessary, you can also change the temperature
settings for the drinks (Parameters).
The display brightness has been set too low. Change this setting (see “Settings”).

Problem solving guide

Problem

Cause and remedy

The display lights up but The demo mode for demonstrating the coffee

the coffee machine does machine in the showroom has been activated.

not heat up and no drinks are made.

Deactivate demo mode (see “Settings”).

Unsatisfactory results

Problem

Cause and remedy

The coffee is not hot enough.

The cup has not been pre-heated. The smaller the cup and the thicker its sides, the more important it is to pre-heat it. Pre-heat the cup, for example, with hot water.

The brewing temperature has been set too low. Set a higher brewing temperature.

The filters in the brew unit are blocked.
Remove the brew unit and clean by hand Degrease the brew unit.

The coffee grinder makes a louder noise than usual.

The coffee bean container has become empty during the grinding process. Fill the coffee bean container with fresh beans.

There may be foreign objects such as plastic or stones in amongst the coffee beans. Switch the coffee machine off immediately. Call
Service.

The coffee flows too quickly into the cup.

The coffee is too coarsely ground. Set the grinder to a finer setting (see “Grinder
setting”).

The coffee is dispensed The brew unit is blocked. too slowly into the cup. Degrease the brew unit (see “Cleaning and care
Degreasing the brew unit and cleaning the interior”).

There is no crema on the The coffee beans are no longer fresh. If roasted coffee

coffee or espresso.

beans are stored open for too long, the carbon dioxide

gradually escapes from the coffee beans. The crema is

no longer formed during dispensing.

Of course, you can still use the coffee beans.

Problem solving guide

Problem The coffee tastes weak. The coffee grounds in the waste container are sludgy and grainy.
Coffee is not being dispensed from both spouts evenly. Milk may be sputtering when being heated up. The consistency of the milk froth is unsatisfactory.

Cause and remedy
Less coffee is being brewed because insufficient coffee beans are getting into the grinder. Have you used a dark roast? This type of coffee bean is often more oily. These oils can cling to the inside of the bean containers and hinder the flow of beans. Are you using a type of coffee with very large beans or different sized beans? The beans are possibly getting wedged or jammed and forming “bean bridges”. Clean the bean containers more often if you are
using darker, more oily coffee beans. If you are using a type of coffee with very large
beans or different sized beans, pull the bean containers out slightly and give them a shake. If necessary, try using a different type of coffee.
Coffee deposits in the central spout are obstructing dispensing. Take the central spout apart and wash all the
components with the exception of the stainless steel cover in the dishwasher. This cleaning operation should be performed once a week.
The milk temperature is too high. Good milk froth can only be achieved with cold milk (below 10 °C). Check the temperature of the milk in the milk flask.
The milk pipework is blocked and/or the milk valve is soiled. Remove and clean the milk valve.

After sales service and warranty

Information to help you rectify faults yourself and about Miele spare parts can be found at www.miele.com/ service.
Contact in the event of a fault
In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department.
You can book a Miele Customer Service Department call-out online at www.miele.com/service. Contact information for the Miele Customer Service Department can be found at the end of this document.
Please quote the model identifier and serial number of your appliance (Fabr./ SN/Nr.) when contacting the Miele Customer Service Department. This information can be found on the data plate. Please note that telephone calls may be monitored and recorded for training purposes and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.

Warranty
For information on the appliance warranty specific to your country please contact Miele. See back cover for address. In the UK, your appliance warranty is valid for 2 years from the date of purchase. However, you must activate your cover by calling 0330 160 6640 or registering online at www.miele.co.uk.

These products and other useful accessories can be ordered via the Miele webshop, from Miele (see back cover for contact details) or from your Miele dealer. – Microfibre cloth
for removing finger marks and light soiling – Cleaning agent for milk pipework for cleaning the milk system – Cleaning tablets for degreasing the brew unit – Descaling tablets for descaling the water pipework – CJ Jug 1.0 l Insulated flask for coffee or tea (pot function) – Miele Black Edition One for all Whole coffee beans perfect for making espresso, café crema and speciality coffees with milk – Miele Black Edition Espresso Whole coffee beans perfect for making espresso – Miele Black Edition Café Crema Whole coffee beans perfect for making coffee
Items supplied will vary depending on appliance and country. To find out which accessories and cleaning and care products are available in your country, please go to the website or contact the Miele Customer Service Department or your Miele supplier.

Accessories
79

*INSTALLATION*

Installation

Electrical connection
The coffee machine is supplied with a mains cable and moulded plug ready for connection to a suitable earthed socket. The socket must be easily accessible after the coffee machine has been installed. If the socket is not easily accessible, ensure that a suitable means of disconnection for each pole is provided on the installation side.
Risk of fire from overheating.
Connecting the coffee machine to multi-socket adapters or extension cables can overload the cables. For safety reasons, do not use multisocket adapters, extension cables, adapters and/or energy-saving plugs.
The electrical system must comply with local and national safety regulations (BS 7671 in the UK). For safety reasons, we recommend using a type residual current device (RCD) in the relevant electrical installation for connecting the coffee machine. If the mains connection cable is damaged, it must only be replaced with a specific mains connection cable of the same type (available from the Miele Customer Service Department). For safety reasons, such replacement may only be carried out by a qualified specialist or the Miele Customer Service Department.

The data plate indicates the nominal power consumption. The fuse rating must be at least 10 A. Compare this information with the data of the on-site electrical connection. If in any doubt, consult a qualified electrician. Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, backup systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard. The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation. As described, for example, in the current version of VDE-AR-E 2510-2.

*INSTALLATION*
Building-in dimensions
Installation in a tall unit Maintain a minimum installation height of 850 mm.
All dimensions are given in mm.

Installation

The appliance can be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed intermediate shelf between them. If the appliance is to be combined with a Gourmet drawer/built-in vacuum drawer, no intermediate shelf is required in between.
81

*INSTALLATION*
Installation
Installation and connections All dimensions are given in mm.
a Mains connection cable b No electrical connection in this area
82

*INSTALLATION*

Installation

Building in the coffee machine
Danger of injury due to incorrect
operation. An appliance that has not been built in is not safe and can cause injuries. Only ever use the coffee machine once it has been built-in.
Danger of damage due to
incorrect operation. If the ambient temperature range is not observed, the coffee machine may not function properly. Only ever operate the coffee machine when the ambient temperature is within the range of +16 °C to +38 °C.

Tip: It is useful to have somewhere at the height of the niche to place the coffee machine on. This will make it easier to connect the appliance to the electricity supply. Connecting the electricity supply
Observe the information under “Electrical connection”. Connect the coffee machine to the electricity supply. Removing the transport safety device

Maintain a minimum installation height of 850 mm.

Tip: If a gap of at least 299 mm is maintained between the wall and the coffee machine, you will be able to open the appliance door wider, making the machine easier to use. For instance, it will be easier to remove the left-hand bean container. To install the machine, you will need a TX 20 screwdriver.

There is a red silicone plug inside the screw hole, which secures the appliance door during transport to prevent transport damage.
Remove the silicone plug before screwing the coffee machine to the cabinet. Pull firmly on the red silicone plug to remove it from the screw hole. The silicone plug is not required again. Dispose of it with your household waste.

*INSTALLATION*

Installation

Pushing in and aligning the coffee machine
Take care not to trap or damage the electrical connection when pushing the appliance into the niche.
Push the coffee machine all the way into the niche until you feel some resistance. Never align the coffee machine by adjusting the door hinges. This will prevent the milk container from attaching correctly and interfere with the milk preparation process.
Check the height of the coffee machine to make sure that it is sitting centrally in the niche and that it is level. Align the appliance if necessary.
You can now screw the coffee machine to the cabinet. Screwing the coffee machine to the cabinet Open the appliance door.

Secure the coffee machine to the side walls of the cabinet using the screws supplied.
Tighten both screws by hand. Tip: To make it easier to attach the screw on the left, you can remove the door opening limiters and increase the door opening angle to approx. 170° (see “Door opening limiters”). Make sure that there is sufficient space available and that the appliance door is not going to hit an adjacent wall. Check that the coffee machine is
working correctly.

2 TX20 (25 mm) screws are supplied with the appliance. 84

*INSTALLATION*

Door opening limiters
The coffee machine door hinges are equipped with door opening limiters that restrict the opening angle of the machine door to approx. 120°. This will prevent the machine door from hitting an adjacent wall and being damaged when opened. The door opening limiters can be removed, allowing you to increase the opening angle to approx. 170°. This makes it easier to remove the bean containers, for example.

Installation
Remove the door opening limiters from the hinges, e.g. by prising them out with a screwdriver.
The machine door opening angle has now been increased to approx. 170°.

Removing the door opening limiters Make sure that sufficient space is available for the larger door opening angle and that the machine door is not going to hit an adjacent wall.

Technical data

Electricity consumption in standby: Electricity consumption in networked standby: Frequency band of the WiFi module Maximum transmitting power of the WiFi module

0.3 W 2.0 W
2.4000 GHz 2.4835 GHz 100 mW

EU Conformity declaration
Miele hereby declares that this coffee machine complies with Directive 2014/53/EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: – Products, Download from
www.miele.ie – For service, information, operating
instructions etc: go to https://miele.co.uk/manuals and enter the name of the product or the serial number
87

UK Conformity declaration
Miele hereby declares that this coffee machine complies w

Documents / Resources

Miele CVA 7440 Built in Coffee Machine [pdf] Instruction Manual
CVA 7440, CVA 7440 Built in Coffee Machine, Built in Coffee Machine, Coffee Machine

References

User Manual

Miele CVA 7440 Built in Coffee Machine Instruction Manual

CVA 7440 Built in Coffee Machine

Specifications:

Product Information:

Product Usage Instructions:

Caring for the Environment:

Saving Energy:

Warning and Safety Instructions:

Appliance Description:

FAQ:

Q: Can I use hot water to fill the water container?

Q: How do I dispose of the old appliance?

Documents / Resources

References

Leave a comment

Cancel reply