midmark TP200 Side Storage Kit Installation Guide

midmark TP200 Side Storage Kit

Product Overview

Installation Instructions

Step 1:
Pull side storage out. Remove by pushing drawer slide clips on side storage towards the rear of delivery system to release from slide base and pull side storage out.

Step 2:
Slide base slides out slightly to access screws. Remove screws (4) and base slides.

Step 3: Remove base of slides from new side storage bottom. Install base of slides into delivery system with screws (4).

Step 4: Lift tubs up and out to remove. Remove screws (6) and door front from side storage

Step 5: Install door front with screws (6). Install storage tubs.
Step 6: Line up slides and push side storage all the way in so slides engage. Pull side storage back out to ensure it is install completely.

© 2024 Midmark Corp.
60 Vista Drive Versailles, OH 45380 USA
1.800.643.6275
1.937.526.3662
midmark.com