MIDLAND LED Headlights Instructions

MIDLAND-LOGO

MIDLAND LED Headlights

MIDLAND-LED-Headlights-PRODUCT

Product Information

Specifications

  • Control Unit: Controls various functions in the vehicle.
  • 10A Battery: Power source for the control unit.
  • Relay 87: Component used to control electrical circuits.
  • Relay 85: Connection point for relay operation.
  • Relay 30: Connection point for power supply to the controlled circuit.
  • Relay 86: Connection point for relay control signal.

Product Usage Instructions

  • Even when the vehicle is switched off, there’s a minimal current drain by the control unit (ECU).
  • Therefore, in case you keep your vehicle stationary for a long period, we suggest you add a relay and connect it as shown in the image.
  • This will reduce the current drain to zero.

Wie in der Abbildung gezeigt angeleschlossen wird. However, the absorption is null and void.

FAQ

  • Q: How do I know if the relay is properly connected?
  • A: Ensure that the connections match the provided diagram and test the functionality by monitoring the current drain.
  • Q: Can I use a different battery rating instead of a 10A battery?
  • A: It is recommended to use a 10A battery as specified for optimal performance and safety.

WIRING

MIDLAND-LED-Headlights-FIG-1

ATTENTION

Even when the vehicle is switched off, there’s a minimal current drain by the control unit (ECU). Therefore, in case you keep your vehicle stationary for a long period, we suggest you add a relay and connect it as shown in the image. In this way, the current drain will be reduced to zero.

Documents / Resources

PDF thumbnailLED Headlights
Instructions · LED Headlights, Headlights

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.