Midea MAD50PS1QWT Smart CUBE Dehumidifier with Pump
UNIT SPECIFICATIONS AND FEATURES
Product overview
Accessories
| Pump drain hose (only for units with the drain pump feature) |  |
| Pump inlet hose (only for units with the drain pump feature) |  |
| Normal drain hose |  |
| Casters |  |
SET UP INSTRUCTIONS
Step 1:
Separate dehumidifier & bucket from the nested shipping/storage position. Remove all packaging materials from the unit.
Step 2:
Rotate dehumidifier 90° and align the arrows on the two labels (one on the bucket and one on the dehumidifier) and carefully sit the dehumidifier down onto the bucket. The water level window in the bucket and the user interface buttons on the dehumidifier should be on the same side when properly stacked. Check to ensure the arrows on the unit and bucket are aligned as in Fig. 4c for proper operation.
Step 3:
Plug the unit in and press the power button and the unit is ready to run in normal (bucket) mode.
Documents / Resources
 |
Midea MAD50PS1QWT Smart CUBE Dehumidifier with Pump [pdf] Instruction Manual MAD50PS1QWT Dehumidifier, MAD50PS1QWT Smart CUBE Dehumidifier with Pump, MAD50PS1QWT Dehumidifier with Pump, Smart CUBE Dehumidifier with Pump, Dehumidifier with Pump, Smart CUBE Dehumidifier, MAD50PS1QWT, Dehumidifier |